Carbon Black MB Description ADBON 9311 is a stabilized polyolefin based masterbatch highly contains Carbon Black together with an antioxidant package offering optimum thermal protection and easy of dilution. It is designed for general usage specially in injection molded parts, mono & multilayer Poly Olefin film, sheet extrusion & etc. Due to the special formulation & fine carbon black used in ADBON 9311, it offers excellent dispersion, high opacity & good resistance to UV exposure. Application ADBON 9311 is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the application it can be used from 1 to 6%.

Carbon Black MB Description ADBON 9610 is a stabilized polyolefin based masterbatch highly contains Carbon Black together with an antioxidant package offering optimum thermal protection and easy of dilution. It is designed for general usage specially in injection molded parts, mono & multilayer Poly Olefin film, sheet extrusion & etc. Due to the special formulation & fine carbon black used in ADBON 9610, it offers excellent dispersion, high opacity & good resistance to UV exposure. Application ADBON 9610 is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the application it can be used from 1 to 6%.

Mineral MB Description ADFIL 230 is a polyolefin based concentrate containing a special mineral component designed for use in PE film and sheet. It improves mechanical properties such as stiffness, falling dart impact, tear resistance with minimum negative effects on optical properties. So it might be applicable for transparent and/or glossy parts to improve productivity through down-gauging. Application ADFIL 230 is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the application and film / sheet structure it can be used from 5% to 25%.

Filler MB Description CALFIN 1152CF is a polyolefin based masterbatch highly filled with fine treated calcium carbonate. It is designed for use in cast-film applications based on HDPE, LLD/LDPE and PP to improve optical and mechanical properties whilst providing significant cost reduction potential. It can be used as an anti-block agent as well. Application CALFIN 1152CF is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the application and film structure it can be used from 5% to 40%.

Filler MB Description CALFIN 1152WA is a polyolefin based masterbatch highly filled with fine treated calcium carbonate. It is designed for use in film applications such as HDPE or LLD/LDPE shopping bags to improve optical and mechanical properties whilst providing significant cost reduction potential. It can be used as an antiblock agent. Furthermore it presents bluish white shade to the final film. Application CALFIN 1152WA is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. CALFIN 1152WA is specially designed for high level usage up to 50%.

Filler MB Description CALFIN 1154CFW is a polyolefin based masterbatch filled with a fine treated calcium carbonate. It is designed for use in mono and multilayer blown or cast film applications based on HDPE, LLD/LDPE and PP to improve optical and mechanical properties such as stiffness, dart-drop impact resistance, printability, sealability and thermal conductivity whilst providing significant cost reduction potential due to replacing white MB and base polymer partially. It can be used as an anti-block agent as well. Furthermore it presents bluish white shade to the final film. Application CALFIN 1154CFW is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the application and film structure it can be used from 5% to 60%. It should be stored in cool and dry place not to exceed 12 months. CALFIN 1154CFW is applicable for food contact application. For more information please contact us.

Filler MB Description CALSIN 110FRF is a polyolefin based masterbatch highly filled with a fine treated calcium carbonate. It is designed for use in a wide range of applications specially in PP raffia bags, PP twines & strapping band to improve the optical and mechanical properties whilst providing significant cost reduction potential. This product is suitable for use in a wide range of plastics that come into contact with food. For more details please contact us. Application CALSIN 110FRF is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. It can be used in PP raffia bags from 2 to 10% depends on the tape denier and facilities.

Filler MB Description CALSIN 1300W is a styrenics based masterbatch highly filled with calcium carbonate. It is designed for use in a wide range of applications specially in PS sheet & PS/ABS injection molded parts to improve the optical and mechanical properties due to its fine treated calcium carbonate whilst providing significant cost reduction potential. What's more it presents bluish white appearance to the final product. This product is suitable for use in a wide range of plastics that come into contact with food. For more details please contact us. Application CALSIN 1300W is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. It can be used in PS sheet from 5 to 20% depends on the thickness and processing condition and in PS/ABS injected parts from 5 to 25%.

Filler MB Description CALSIN LC102 is a polyolefin based masterbatch highly filled with calcium carbonate. It is designed for use in a wide range of applications specially in PP & HDPE injection molded parts to improve the optical and mechanical properties specially dimensional stability and stiffness whilst providing significant cost reduction potential. Application CALSIN LC102 is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. As usual it can be used in PP & HDPE injection molded parts from 5 to 35% depends on the part & the mold design. This grade is not suitable for PE film and PP raffia bag. For more details please contact us.

Filler MB Description CALSIN SE102 is a polyolefin based masterbatch highly filled with fine treated calcium carbonate. It is designed for use in PP & PE mono and multilayer sheet applications to improve optical and mechanical properties whilst providing significant cost reduction potential. This product is suitable for use in a wide range of plastics that come into contact with food. For more details please contact us. Application CALSIN SE102 is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the application, thickness of sheet and technical skill it can be used from 10% to 35%.

Filler MB Description CALSIN SE105 is a polyolefin based masterbatch highly filled with a fine treated calcium carbonate. It is designed for use in PP & PE mono and multilayer sheet applications to improve optical and mechanical properties whilst providing significant cost reduction potential. This product is suitable for use in a wide range of plastics that come into contact with food. For more details please contact us. Application CALSIN SE105 is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the application, thickness of sheet and technical skill it can be used from 10% to 35%.

Filler MB Description CALSIN SE107 is a polyolefin based masterbatch highly filled with a fine treated calcium carbonate. It is designed for use in PP & PE mono and multilayer sheet applications and other extrusion processes to improve optical and mechanical properties whilst providing significant cost reduction potential. This product is suitable for use in a wide range of plastics that come into contact with food. For more details please contact us. Application CALSIN SE107 is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the application, thickness of the sheet and technical skill it can be used from 10% to 35%.

Carbon Black MB Description CYPOL 911ID is a stabilized polyolefin based masterbatch highly contains Carbon black together with an antioxidant package offering optimum thermal protection and easy of dilution. It is specially designed for use in PE drip irrigation pipe manufacturing as carbon black MB. Due to the special formulation & fine carbon black used in CYPOL 911ID, it offers excellent dispersion, high properties & good resistance to UV exposure. Application CYPOL 911ID is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the pipe structure and type it can be used from 4 to 6%.

Carbon Black MB Description CYPOL 911PT is a stabilized polyolefin based masterbatch highly contains with Carbon black together with an antioxidant package offering optimum thermal protection and easy of dilution. It is specially designed for use in PE 100 high pressure pipe manufacturing as carbon black MB. Due to the special formulation & fine carbon black used in CYPOL 911PT, it offers excellent dispersion, high properties & good resistance to UV exposure. Application CYPOL 911PT is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the pipe structure and type it can be used from 4 to 6%.

Carbon Black MB Description CYPOL 920R is a stabilized polyolefin based masterbatch partially contains recycle resin highly filled with Carbon black. It is designed for use in general application as eco-grade black MB in PE sheet, injection molding, corrugated pipe and etc. Application CYPOL 920R is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the application it can be used from 1 to 6%.

Carbon Black MB Description CYPOL 921VR is a stabilized polyolefin based masterbatch highly filled with Carbon black together with an antioxidant package offering optimum thermal protection and easy of dilution. It is designed for use in PE high pressure pipe manufacturing as carbon black MB. Due to the special formulation & fine carbon black used in CYPOL 921VR, it offers excellent dispersion, high properties & good resistance to UV exposure. Application CYPOL 921VR is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the type of pipe and its structure it can be used from 4 to 6%.

Carbon Black MB Description PB 910A is a stabilized polyolefin based masterbatch highly contains Carbon black together with an antioxidant package offering optimum thermal protection and easy of dilution. It is designed for general usage specially in injection molded parts, mono & multilayer PO film, sheet & etc. Due to the special formulation & fine carbon black used in PB 910A, it offers excellent dispersion, high opacity & good resistance to UV exposure. Application PB 910A is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the application it can be used from 1 to 6%.

Carbon Black MB Description PB 910E is a stabilized polyolefin based masterbatch contains FEF Carbon Black together with an antioxidant package offering optimum thermal protection and easy of dilution. It is designed for general usage specially in PE and PP injection molded parts, mono & multilayer PO film, sheet & etc whilst providing significant cost reduction potential. Due to the special formulation & fine carbon black used in PB 910E, it offers excellent dispersion, high opacity & good resistance to UV exposure. Application PB 910E is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the application it can be used from 2 to 8%.

Desiccant MB Description POYAD DS201 is an advanced moisture absorber MB eliminates moisture effects on PE blown/cast film, PE and PP injection molding, blow molding, sheet/profile extrusion and etc. It's widely used for recycling and damped plastics. Application POYAD DS201 is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-bending. Meanwhile it can absorb moisture 20% of its own weight, it can be used from 1 to 8%, however 3% is recommended. Use the mixture of this product within 24 hours and heat seal the opened bags immediately to keep its efficiency. Store in clean, dry and cool place, out of sun exposure not to exceed 6 months. Don't use opened or damaged packages before drying.

Polymer Processing Aid MB Description POYAD PA211 is specially designed to improve the processability of LLDPE rich materials, MDPE and HDPE. It works by coating the internal surface of the extruder and die and thereby reduces the friction between the polymer and the metal. This leads to reduce or eliminate melt fracture, improved surface quality, clarity, gloss and reduced extruder head pressure which often allows higher output rates and/or reduces power consumption. It can also be used to reduce die build up. POYAD PA211 typical application are film, sheet and pipe extrusion as well as blow molding. It's suitable for use in a wide range of plastics that come into contact food. For more details please contact us. Application POYAD PA211 is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. For maximum efficiency, it is advisable to pre-condition the extruder by using a high initial dosing level of up to 15% and should be continued for 10 to 15 minutes until melt fracture is eliminate. The following continuous addition level can then be 1-2%. Some additives such as anti-block and some pigments affect its efficiency.

Light Stabilizer MB Description POYAD UV220 is a polyolefin based UV stabilizer MB containing 20 % of HALS. It's designed to enhance light stability of HDPE, LDPE and LLDPE film, sheet and injected parts. Application POYAD UV220 is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the application it can be used from 1 to 6%.

Titanium Dioxide MB Description WMB 117 is a Poly Olefin based master batch designed specially for use in PP raffia bags and PP sheet although it's applicable in injection molding and blow molding as well. Due to the fine & special treated titanium dioxide used in WMB 117, it offers excellent dispersion, high opacity & good resistance to UV exposure. This product is suitable for use in a wide range of plastics parts that come into contact with food. For more details please contact us. Application WMB 117 is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the application it can be used from 1 to 4%.

Titanium Dioxide MB Description WMB 122B is a polyolefin based masterbatch highly filled with whitening pigments. It is designed for use in mono & multilayer PO blown and cast film applications such as HDPE or LLD/LDPE shopping bags and packaging. Also applicable in other extrusion and molding processes. Due to the fine & special treated titanium dioxide used in WMB 122B, it offers excellent dispersion, high opacity & good resistance to UV exposure. This product is suitable for use in a wide range of plastics that come into contact with food. For more details please contact us. Application WMB 122B is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the application it can be used from 1 to 6%.

Titanium Dioxide MB Description WMB 126M is a polyolefin based masterbatch highly filled with whitening pigments. It is designed for use in mono & multilayer PO blown and cast film applications such as HDPE or LLD/LDPE shopping bags and packaging. Due to the fine & special treated titanium dioxide used in WMB 126M, it offers excellent dispersion, high opacity & good resistance to UV exposure. This product is suitable for use in a wide range of plastics that come into contact with food. For more details please contact us. Application WMB 126M is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the application it can be used from 1 to 4%.

Titanium Dioxide MB Description WMB 126S is a polyolefin based masterbatch highly filled with whitening pigments. It is designed for use in mono & multilayer PO blown and cast film applications specially where high heat stability and hiding power is required. This product is suitable for use in a wide range of plastics that come into contact with food. For more details please contact us. Application WMB 126S is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the application it can be used from 1 to 4%.

Titanium Dioxide MB Description WMB 127M is a polyolefin based masterbatch ultra highly filled with whitening pigments. It is designed for use in mono & multilayer PO film applications such as HDPE or LLD/LDPE shopping bags and dairy packaging. Due to the fine & special treated titanium dioxide used in WMB 127M, it offers excellent dispersion, high opacity & good resistance to UV exposure. This product is suitable for use in a wide range of plastics that come into contact with food. For more details please contact us. Application WMB 127M is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the application it can be used from 1 to 4%.