AFFINITY™ PL 1860G Polyolefin Plastomer is a high-performance sealant resin produced via INSITE™ technology from Dow. It is designed to offer low seal initiation temperature, high packaging speeds and very good hot-tack strength as well as providing excellent optical properties. Main Characteristics: - Low seal initiation temperature - Very good hot-tack strength - High packaging line speeds Complies with: - EU, 10/2011 Consult the regulations for complete details.

APPEEL™ 35D140 is a modified polyolefin resin designed to function as a peelablesealing layer. It is most often suggested to provide interfacial peel seals film to film,and occasionally for peel seal from PP and PE. It is available in pellet form for usein conventional extrusion or coextrusion equipment designed to process polyethylene resins. Features - Contains amide slip agent - Contains antiblock agent Applications - Interfacial Peel Seal for pouches, Peelable Lidding film to other polyolefin substrates,

APPEEL™ 35D210 is a modified polyolefin resin designed to function as a peelablesealing layer. It is most often suggested to provide interfacial peel seals film to film,and occasionally for peel seal from PP and PE. It is available in pellet form for usein conventional extrusion or coextrusion equipment designed to process polyethylene resins. Characteristics / Benefits - Contains amide slip agent - Contains antiblock agent Applications - Interfacial Peel Seal for pouches, Peelable Lidding film to other polyolefin substrates,

APPEEL™ 35D220 is a modified polyolefin resin designed to function as a peelable sealing layer. It is most often suggested to provide interfacial peel seals film to film, and occasionally for peel seal from PP and PE. It is available in pellet form for use nin conventional extrusion or coextrusion equipment designed to process polyethylene resins. Characteristics / Benefits - Contains amide slip agent - Contains antiblock agent Applications - Interfacial Peel Seal for pouches, Peelable Lidding film to other polyolefin substrates,

APPEEL™ 55010 is a modified polyolefin resin designed to function as a sealing layer for lidding applications, most commonly sealing to polyproylene. It is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins. Uses - Lidding Sealant Applications - APPEEL™ 55010 has strong sealability to PP and allows a peelable seal from it. - Boiling resistance. APPEEL™ 55010 endures boiling process. - In the case of: OPET/ adh // APPEEL™ 55010 , these film structures endure boiling condition at 120C / 30min - APPEEL™ 55010 conforms to Code #20 of the Ministry of Health and Welfare Japan. Typical structures for this lidding would be: OPET / adhesive // APPEEL™ 55010 OPET / adhesive // coex film with APPEEL™ 55010 APPEEL™ 55010 is used as a heat seal layer in lidding material for injection molded and vacuum molded PP containers used in the packaging of puddings, jelly, and other food items.

DOW ENDURANCE™ HFDK-0587 BK S is a crosslinkable semi-conductive compound based on an ethylene copolymer, and a select clean furnace type carbon black providing excellent smoothness compared to standard semicons. DOW ENDURANCE HFDK-0587 BK S offers outstanding extrusion properties. Low pressure and temperature generation result in outstanding scorch resistance and excellent smoothness under a wide processing window. Applications DOW ENDURANCE HFDK-0587 BK S is recommended as conductor and bonded insulation shielding for high voltage XLPE power cables. DOW ENDURANCE HFDK-0587 S is especially developed for use in high voltage cables, where it provides a clean and smooth interface with the insulation XLPE. DOW ENDURANCE HFDK-0587 BK S provides a good resistance to welding when high degassing temperatures are used. DOW ENDURANCE HFDK-0587 BK S is preferably combined with DOW ENDURANCE™ HFDK-4201 SC, or DOW ENDURANCE™ HFDK-4300 SC insulation compounds. For EHV applications, the use of DOW ENDURANCE™ HFDK-0801 EHV is recommended for use as conductor shielding. Specifications Power cables with conductor and/or insulation shielding made of DOW ENDURANCE HFDK-0587 BK S, prepared using sound, commercial fabrication practice, would be expected to meet the following cable specification(s): - IEC: 60502, 60840 and 62067 - HD: 620 S1 and 632 S1 - BS: 6622 - DIN: VDE 0273 and 0263 - Edf: HN-33-S-23 and HN-33-S-52 - US: ICEA S-108-720 Consult the regulations for complete details.

DOW ENDURANCE™ HFDK-0587 BK is a crosslinkable semi-conductive compound based on an ethylene copolymer, DOW ENDURANCE HFDK-0587 BK offers outstanding extrusion properties and allows high rates. Low pressure and temperature generation result in outstanding scorch resistance and excellent smoothness under a wide processing window. Applications DOW ENDURANCE HFDK-0587 BK is recommended as conductor and bonded insulation shielding for medium voltage XLPE power cables. DOW ENDURANCE HFDK-0587 is especially developed for high speed production in combination with DOW ENDURANCE™ HFDK-4202 EC and HFDK-4201 EC insulation compounds. Specifications Power cables with conductor and insulation shielding made of DOW ENDURANCE HFDK-0587 BK, prepared using sound, commercial fabrication practice, would be expected to meet the following cable specification(s): - IEC: 60502 and 60840 - HD: 620 S1 and 632 S1 - BS: 6622 - DIN: VDE 0273 and 0263 - Edf: HN-33-S-23 and HN-33-S-52 Consult the regulations for complete details.

SEC 39001 Specialty Ethylene Copolymer is an ethylene butene copolymer, offers excellent processing and performance in various applications such as footwear and wire & cable. Main Characteristics: - Pellet form - Excellent processability Applications: - Foam application - Halogen free flame retardance (HFFR) compound

DFDA-1675 NT is a non-halogen, flame retardant, polyolefin based thermoplastic compound for applications in communication cables and jacketing. DFDA-1675 NT offers superior electrical properties, flame retardance, processability, and flexibility. Once commercialized, DFDA-1675 NT will be known as UNIGARD™ RE DFDA-1675 NT. Features DFDA-1675 NT has the following features: - Highly flame retardant - Excellent electrical properties and moisture resistance - Environmentally friendly (lead-free, halogen-free, and sulfur/antimony-free) - Low smoke, low corrosivity, and low toxicity - Good balance of toughness and flexibility - Ease of extrusion and no special screw required - ROHS compliance Usage Recommendations and Specifications DFDA-1675 NT is a cross-web compound for Plenum Category 6 communication cables requiring UL NFPA 262 flame test rating. This flame test rating is cable construction dependent and individual testing and listing are required. Each manufacturer utilizing DFDA-1675 NT must contact the standards agency o determine what evaluations, if any, are required to receive application approvals.

DHDA-7707 BK is a deformation resistant semiconductive material specifically designed for use as insulation shielding for crosslinkable polyethylene insulated power cable. In today's cable technology, DHDA-7707 BK also finds application as a thermoplastic conductor shield and as an overall jacket where superior thermal stress, crack resistance and toughness are valued properties. Other attractive properties include superior volume resistivity stability, and ease of processing. Specifications Cables with insulation shielding or jackets of DHDA-7707 BK prepared using sound commercial extrusion practice should meet the following specifications: - AEIC: CS8-00 - ICEA: S-94-649 - ICEA: S-97-682

ENGAGE™ 11567 is a polyolefin elastomer offering excellent rubber loading efficiency for superior impact modification in thermoplastic polyolefin (TPO) compounds. Its improved toughening efficiency compared to other commercially available polyolefin elastomers allows for greater ease in optimizing elastomer levels to meet impact resistant requirements in global automotive specifications. TPO formulations containing ENGAGE 11567 combine good processing behavior with an excellent stiffness/toughness balance for automotive parts, such as bumper fascia. The design of the ENGAGE 11567 polyolefin elastomer enables shortening the injection molding cycle time for the TPO compound. Its design contribute to morphology control and improved temperature resistance for final parts. Main Characteristics: - High rubber loading efficiency for optimum cost/performance balance - Improved toughness for better stiffness/toughness balance - Good flow characteristics - Demonstrated improved cycle time - High melting point for improved temperature resistance - Pellet form with partitioning agent for ease of handling Applications: - Impact Modification of TPO - Injection molded polyolefin compounds

ENLIGHT 4145F Polyolefin Encapsulant Film is intended for use in Photovoltaic applications. This film is suitable for rigid modules that use crystalline silicon or thin film technologies, as well as flexible module configurations. General Characteristics: - Optical Transmission: >90% - Lower UV cutoff: 285 nm - Thickness: 18 - 30 mil (457 - 762 µm) - Width: 20 - 86 in (510 - 2180) mm

FUSABOND™ N216 is an anhydride modified ethylene elastomer. Composition - High% By Weight Maleic Anhydride - Graft levels are defined as: - Low < 0.2%; Medium 0.2-0.5%; High 0.5-1.0%; Ultra high > 1.0% Applications - Impact modifier for polyamide blends with high MAH grafting level. - Compatibilizer for flame retardant fillers in non-halogen flame retardant polyolefin-based wire and cable compounds. - Compatibilizer or adhesion promoter between polyolefins and metals, polyamide, cellulose, and glass fibers.

FUSABOND™ N493 is an anhydride modified ethylene copolymer. Uses - Polymer Modifier Composition - Medium% By Weight Maleic Anhydride - Graft levels are defined as: - Low < 0.2%; Medium 0.2-0.5%; High 0.5-1.0%; Ultra high > 1.0% Applications - Impact modifier for polyamide blends. - Blends for golf balls covers. - Compatibilizer for flame retardant fillers in non-halogen flame retardant polyolefin-based wire and cable compounds. - Compatibilizer or adhesion promoter between polyolefins and metals, polyamide, cellulose, and glass fibers.

FUSABOND™ N525 is an anhydride modified ethylene copolymer. Uses - Polymer Modifier Composition - High% By Weight Maleic Anhydride - Graft levels are defined as: - Low < 0.2%; Medium 0.2-0.5%; High 0.5-1.0%; Ultra high > 1.0% Applications - Impact modifier for polyamide blends with high grafting level of maleic anhydride. - Efficient modifier for polyolefin based wire and cable compounds. - Blends for golf balls covers. - Compatibilizer or adhesion promoter between polyolefins and metals, polyamide, cellulose, and glass fibers.

FUSABOND™ N598 is an anhydride modified ethylene copolymer. Uses - Polymer Modifier Composition - Medium% By Weight Maleic Anhydride - Graft levels are defined as: - Low < 0.2%; Medium 0.2-0.5%; High 0.5-1.0%; Ultra high > 1.0% Features - Good balance of toughness and mold flow in PA6 modification. Applications - Impact modifier for polyamide blends with medium grafting level of maleic anhydride. - Provides impact resistance for high flow polyamide compounds. - Compatibilizer or adhesion promoter between polyolefins and metals, polyamide, cellulose, and glass fibers.

INTEGRAL™ 602 Polyolefin Adhesive Film is a heat-activated adhesive film specifically formulated for bonded to steel on both sides of the film. It can also be used as a tie layer to bond two substrates together. New experimental films are continually being developed. Please discuss your particular application needs with your Dow representative. General Characteristics: - Heat Activation Point: 215 °F (102 °C) - Yield: 208 ft²/lb/mil (42.6 m²/kg/25 µm) - Available Colors: Green - Gauge Range: 1.5-4.0 mil (38-102 µm) - Width Range: 15-65 inches (380-1650 mm)

OPTICITE™ SQZ Clear Polyolefin Label Film is a matte, clear label film for pressure-sensitive applications that require squeezability. Available in 3.0 mil thickness.

OPTICITE™ SQZ White Polyolefin Label Film is a white label film for pressure-sensitive applications that require squeezability. Available in 3.5 mil thickness.