4KFLEX® Polypropylene, Compounded TPO resin

High Flow, High Stiffness Interior TPO Suitable for Seamless Airbag Applications

High Performance, Scratch Resistant TPO for Seamless Airbag Applications Approved to Chrysler MS-DC265, Type D Specification

ALLEN® T3050LG is a general purpose TPO that has high impact properties and a good cost to performance ratio to other materials like steel, FRP, aluminum, and other thermoplastics. ALLEN® T3050LG has beed tested under laboratory conditions and has achieved a UL94 HB rating at 0.060 in (1.52mm) and above and meets the requirements of Federal Motor Vehicle Safety Standard No. 302 (FMVSS 302). Suggested Applications - Vehicle Interiors - Industrial Housings - Heavy Equipment parts - Agriculture Equipment parts - Antenna covers - Exterior RV components Features - UV and non UV resistant products available - Excellent low temperature impact strength - Edge trim easily used into future orders - Excellent chemical resistance - High heat resistance - Low gloss finish only

PPTF20BK is a general purpose 20% talc filled polypropylene compound with good UV performance, manufactured from recycled polymer.

PPTF300BK is a general purpose 30% talc filled polypropylene compound with good UV performance, manufactured from recycled polymer.

PPTF40BK is a general purpose 40% talc filled polypropylene compound with good UV performance, manufactured from recycled polymer.

PPUFBK is a general purpose polypropylene compound manufactured from recycled polymer.

PPUFBK is a general purpose polypropylene compound manufactured from recycled polymer.

PPUFBK is a general purpose polypropylene compound with good impact performance and manufactured from recycled polymer.

PPUFBK is a general purpose polypropylene compound with good impact performance and manufactured from recycled polymer.

PP based, extrusion TPO, Zero Halogen compound. Note: Additional custom color matching is available upon request.

A TPO Elastomer designed for general purpose applications. RoHS Compliant material with excellent low temperature properties.

AuroraFlex 20111618 is a thermoplastic elastomer that has been developed for applications that require silk matte surface finish. Product is supplied as ready to use pellets.

UL 94 V-0, low bloom, flame retardant polypropylene compound designed with halogen-based technology. AuroraFlex 9410FRV0 exhibits a balance of high flexural modulus and good impact. It is designed for extrusion and molding applications.

A TPO/TPR based alloy suitable for extrusion applications. GTPO5041-2 may be used as a replacement for PVC compounds. Note: Additional custom color matching is available upon request.

A UL 94 V 0 rated, Acid Resistant, Polypropylene based compound, the 5000SN series are specially engineered, low bloom, flame retardant, designed with halogen based technology. 5000SN series of compounds exhibit a balance of high flexural modulus and good impact. They are designed for extrusion and molding applications.

High flow flame retardant TPO compound for insulation and jacketing designed for ribbon cable applications. The flame retardant package incorporates non PDBPO, PBB, PBDE flame retardants, which is RoHS and WEEE compliant. The GTPO8102BA H series of products is formulated to meet UL VW 1 testing as well as the CSA test C22 2 No. 0.6 flame test. Note: Additional custom color matching is available upon request.

GTPO8102E-OF is Rubber modified FR, polypropylene based compound, suitable for insulation and jacketing compound and is formulated to meet CSA test C22-2 No. 0.6 flame test. GTPO8102E-OF is currently used in flat ribbon cable, heat trace and appliance wire applications requiring compound rated for 105°C continuous temperature service. Note: Additional custom color matching is available upon request.

A Flexible, TPO based, Low Smoke, Zero Halogen compound, exhibiting excellent processing characteristics with superior physical and low temperature properties

A flexible, UV Resistant, TPO based, Low Smoke, Zero Halogen compound exhibiting excellent processing characteristics with superior physical and low temperature properties

A Black conductive TPO based compound suitable for extrusion application. Note: Additional custom color matching is available upon request.

A Polypropylene based, zero halogen, flame retardant, 105 °C rated compound with good processing and mechanical characteristics. Note:Additional custom color matching is available upon request.

20% Mineral reinforced TPO with up to 100% sustainable feedstock Formerly known as Evolve TPO20MF2003

TPO Formerly known as DualPoly 15TF1502

Description Borcycle™ EE1300SY is a 15% % mineral filled polypropylene compound containing 30% post-consumer recycled polymer and is intended for injection moulding. This material has an excellent balance between impact strength and stiffness and gives a good surface quality. Applications Borcycle EE1300SY has been developed especially for the car industry to be used in automotive interior parts. - Door panels and pockets - Pillar trims - Tailgate claddings - Interior trims Special Features - High scratch resistance - Good surface aesthetics - Low volatiles - Recycled content

Description Borcycle™ GD3600SY is a 30% chemically coupled glass fibre reinforced polypropylene compound. This material contains 68% post-consumer recycled polymer and is intended for injection moulding. The product is available in standard black 9502. Applications Borcycle GD3600SY has been developed especially for the automotive industry. Special Features - Good flowability - Good impact behaviour - Recycled content

Description Borcycle™ L1300SY is a 15% % mineral filled polypropylene compound containing 30% post-consumer recycled polymer and is intended for injection moulding. This material has an excellent balance between impact strength and stiffness and gives a good surface quality. Applications Borcycle L1300SY has been developed especially for the car industry to be used in automotive interior parts. - Door panels and pockets - Pillar trims - Tailgate claddings - Interior trims Special Features - High scratch resistance - Good surface aesthetics - Low volatiles - Recycled content

Description Borcycle ME1490SYB is a 10% mineral filled polypropylene compound intended for injection moulding. Applications Borcycle ME1490SYB is intended for: Exterior automotive parts Physical Properties Values determined on standard injection moulded specimens conditioned at 23°C and 50% relative humidity after at least 96 hours storage time.

Description Borcycle ME2220SY is a 20% mineral filled polypropylene compound intended for injection moulding. It contains 25% post-consumer recycled polymer. This material has been specifically developed for the automotive industry. Applications Borcycle ME2220SY has been developed especially for the car industry to be used in automotive parts.

FSC65T30 is a 30% mineral filled polypropylene compound intended for injection moulding. Applications FSC65T30 has been developed especially for the car industry to be used in automotive interior parts. - Dashboard carriers - Air ducts - Other automotive interior parts

MD494WG is a 40% mineral filled polypropylene compound intended for injection moulding. This material has excellent balanced mechanical properties and a medium melt flow rate.

MG160AI is a 10% mineral filled high crystallinity polypropylene compound intended for injection moulding. This material has an excellent balance between impact strength and stiffness. Applications MG160AI has been developed especially for the car industry to be used in automotive interior parts. - Automotive interior applications - Pillar trims Special Features - Good flowability - Outstanding scratch resistance

ZC011 is a Mineral filled polypropylene compound intended for extrusion moulding. The product is 30% Mineral filled.