ME212U is a 20% mineral filled polypropylene compound intended for injection moulding. This material has excellent balanced mechanical properties and is easy to process.

ME212WS is a 20% mineral filled polypropylene compound intended for injection moulding. The product is available in standard black 9502. Applications ME212WS has been developed especially for applications like: Automotive under the bonnet parts Special Features - High heat stabilised - The product is available in black.

ME266U is a 20% mineral filled polypropylene compound intended for injection moulding. This material has an excellent balance between impact strength and stiffness and gives a good surface quality. Applications ME266U has been developed especially for the car industry to be used in automotive interior parts. - Pillar trims - Automotive interior applications - Door panels and pockets

ME268AI is a 20% mineral filled polypropylene compound intended for injection moulding. Applications ME268AI has been developed especially for the car industry to be used in automotive interior parts. - Dashboards - Other automotive interior parts - Pillar trims Special Features - No tendency to show stickiness after outdoor exposure

ME466WG is a 40% mineral filled polypropylene compound intended for injection moulding. The product is available in 9020 white. Applications - Tubs for washing machines - Basement for washing machines, dishwashers and dryers - Washing machine parts Special Features ME466WG has been developed especially for the white goods industry.

MG160AI is a 10% mineral filled high crystallinity polypropylene compound intended for injection moulding. This material has an excellent balance between impact strength and stiffness. Applications MG160AI has been developed especially for the car industry to be used in automotive interior parts. - Automotive interior applications - Pillar trims Special Features - Good flowability - Outstanding scratch resistance

MS64T20 is a 20% mineral filled polypropylene compound intended for injection moulding. This material has excellent balanced mechanical properties and is easy to process. Applications MS64T20 has been developed especially for the automotive industry. - Cowl vent grilles - Automotive exterior applications - Automotive interior applications

PP1121 is a high impact polypropylene heterophasic copolymer intended for extruded goods. This grade is characterized by combination of good stiffness, good creep resistance and very high impact strength even at low temperatures. This grade features high thermal stability, very low shrinkage and very good processability. As all polypropylenes, this grade shows excellent stress-cracking and chemical resistances. This grade is mildly nucleated to maximize the mechanical stiffness. Nucleation, good flow properties and high stiffness create a high potential for cycle time reduction. Special Features - Good stiffness - Good impact strength - Good stress crack resistance - Very good processability - High melt stability - Very low post extrusion shrinkage

PP4874 is a polypropylene compound intended for the solid insulation of data cables. Applications PP4874 is designed for high performance Unshielded Twisted Pair (UTP) data cables where short lay length and high twisting speed demand superior insulation hardness. The product exhibits high speed extrusion and provides process stability with regard to diameter and geometry, providing good conductor adhesion. PP4874 is not intended as a telephone insulation for external applications. It is not intended for use in contact with petroleum jelly and has not been tested against the demanding high temperature (105°C) petroleum jelly ageing requirements typically specified for such cables Specifications PP4874 meets the following material classification: - ISO 1873-1, KGHN, 1605-D022/045 - ASTM D 4101 - 11,PP0120B77000 E11 The following cable material standards are met by PP4874: - EN 50290-2-25 Cables manufactured with PP4874 using sound extrusion practice normally comply with the following cable product standards: - EN 50288 - IEC 61156

PS65T20 is a 20% mineral filled polypropylene compound intended for injection and back injection moulding. This material has excellent balanced mechanical properties and high melt flow rate. Applications PS65T20 has been developed especially for the car industry to be used in automotive interior parts. - Trunk claddings - Automotive interior applications

QB341 is a 10% mineral filled polypropylene compound intended for injection moulding. Applications QB341 has been developed especially for the automotive industry. - Under the bonnet components - Automotive exterior applications Special features - UV stabilised - Good stiffness and impact balance

QB370 is a 30% mineral filled polypropylene compound intended for injection moulding.

QB377 is a 12% mineral filled polypropylene compound intended for injection moulding. Applications QB377 has been developed especially for the white goods industry. Special features - High flow - High stiffness

RA130E is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is natural coloured. Applications RA130E is recommended for the production of PP-R pipes and fittings used in - Heating - Plumbing - Domestic water - Relining - Industrial applications The product is used for single as well as for multilayer pipes, where you then differentiate between plastic multilayer and aluminium multilayer pipes. Specifications RA130E is intended to fulfill following standards and regulations, in case of appropriate industrial manufacturing standard procedures applied and a continuous quality system is implemented. - DIN 8078 - DIN 8077 - EN ISO 15874 Special features RA130E is a ready made compound in pellet form for the production of pipes and fittings and included is a specially selected additive package to ensure: - Enhanced processability - Economical pipe production - Excellent product consistency - High temperature resistance - Low influence on taste & odour - Good impact strength The pipe system will show high durability, no corrosion, good weldability, homogeneous joints, low tendency to incrustrations and fast and easy installation.

RA130E-6017 is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is green coloured. Applications RA130E-6017 is recommended for the production of PP-R pipes and fittings used in - Domestic water - Heating - Relining - Plumbing - Industrial applications The product is used for single as well as for multilayer pipes, where you then differentiate between plastic multilayer and aluminium multilayer pipes. Specifications RA130E-6017 is intended to fulfill following standards and regulations, in case of appropriate industrial manufacturing standard procedures applied and a continuous quality system is implemented. - DIN 8078 - DIN 8077 - EN ISO 15874 Special features RA130E-6017 is a ready made compound in pellet form for the production of pipes and fittings and included is a specially selected additive package to ensure: - Enhanced processability - Economical pipe production - Excellent product consistency - High temperature resistance - Low influence on taste & odour - Good impact strength The pipe system will show high durability, no corrosion, good weldability, homogeneous joints, low tendency to incrustrations and fast and easy installation.

RA130E-8427 (industrial) is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is grey coloured.

RA130E-8427 is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is grey coloured. Applications RA130E-8427 is recommended for the production of PP-R pipes and fittings used in - Heating - Plumbing - Domestic water - Relining - Industrial applications The product is used for single as well as for multilayer pipes, where you then differentiate between plastic multilayer and aluminium multilayer pipes. Specifications RA130E-8427 is intended to fulfill following standards and regulations, in case of appropriate industrial manufacturing standard procedures applied and a continuous quality system is implemented. - DIN 8078 - DIN 8077 - EN ISO 15874 Special features RA130E-8427 is a ready made compound in pellet form for the production of pipes and fittings and included is a specially selected additive package to ensure: - Enhanced processability - Economical pipe production - Excellent product consistency - High temperature resistance - Low influence on taste & odour - Good impact strength The pipe system will show high durability, no corrosion, good weldability, homogeneous joints, low tendency to incrustrations and fast and easy installation.

PP-RCT (PolyPropylene-Random Crystallinity Temperature) is a material classification defined in ISO 1043-1:2001 to describe the second-generation class of PP-R materials. This pipe class, PP-RCT, has recently been included in EN ISO 15874, the global standard for plastics piping systems for Hot and Cold Water pipe installations and enable increased performance and competitiveness for pipe producers. RA7050-GN is a PP-RCT polypropylene-random-copolymer with a special crystallinity brought about by a special beta-nucleation which exhibits an improved pressure resistance, especially at elevated temperatures. PP-RCT materials such as RA7050-GN are designed to fulfil the PP-RCT pipe class as described in the EN ISO 15874 standard, e.g. 50 years service life at 70°C at 5 MPa, compared to 3.2 MPa for standard PP-R materials when tested according to the ISO 9080 pipe pressure tests. RA7050-GN is ready compounded for maximum quality control. The colour of RA7050-GN is green similar to RAL 6024. Applications In general RA7050-GN is intended to be used in applications for plumbing and heating, such as in-house hot and cold water pipes and fittings, floor and wall heating systems and radiator connections.

RB206MO is a random copolymer with good transparency and contact clarity, very good gloss and surface finish The high stiffness of this grade allows for a reduction in cycle time. This grade also features high heat distortion temperature. Applications - Monolayer and multilayer bottles in the food or cosmetic - industry (hot filling) - Cosmetics Special features - High stiffness - Improved gloss and excellent transparency - Good contact clarity - Optimal surface

RB307MO is a random copolymer with good transparency and contact clarity, very good gloss and surface finish This grade also features high heat distortion temperature. Applications - Household and chemical containers such as detergents, cleaners, motor oils - Industrial chemicals - Cosmetics Special features - Improved gloss and excellent transparency - Good contact clarity - Optimal surface

RB344 is a 10% mineral filled polypropylene compound intended for injection moulding. Applications RB344 has been developed especially for the car industry to be used in automotive interior parts. - Interior trims - Pillar trims Special features - Good combination of stiffness and surface aesthetics - Good toughness

RB354 is a 20% mineral filled polypropylene compound intended for injection moulding. Applications RB354 has been developed especially for the white goods industry. - Lids - Covers Special features Very good combination of stiffness and surface aesthetics

RB361 is a 20% mineral filled polypropylene compound intended for injection moulding.

RB363 is a 20% mineral filled polypropylene compound intended for injection moulding. Applications RB363 has been developed especially for the automotive industry. - Automotive exterior applications - Automotive interior applications Special features - Good stiffness - Excellent surface appearance - Good scratch resistance

RB707CF is a random copolymer Applications RB707CF is recommended for: - Transparant packaging film - Sealing layer in coextrusion - Textile packaging film - Food packaging - Lamination films - Label film - Technical and protection film Additives RB707CF does not contain slip or antiblock additives. Special features RB707CF is optimised to deliver: - High gloss - Low haze - Heat sterilisable - High stiffness - Good sealing performance

RC007 is a 40% mineral filled polypropylene compound intended for injection moulding. Applications RC007 has been developed especially for the automotive industry. - Automotive interior applications - Engine covers - Under the bonnet components Special features - High stiffness - Improved high thermal stability

RC101 is a 20% mineral filled polypropylene compound intended for injection moulding. Applications RC101 has been developed especially for the car industry to be used in automotive interior parts. - Interior trims - Automotive interior applications Special features - Very good combination of impact, stiffness and surface aesthetics

RC196 is a 30% mineral filled polypropylene compound intended for injection moulding.

RD204CF is a random copolymer This grade is suitable for the manufacturing of unoriented films on chill roll processes. CAS-No.: 9010-79-1 Applications RD204CF is recommended for: - Food packaging - Stationary films - Lamination films - Flower packaging Textile packaging film

RD208CF is a random copolymer This grade is suitable for the manufacturing of unoriented films on chill roll processes. Applications RD208CF is recommended for: - Food packaging - Lamination films - Textile packaging film - Stationary films - Flower packaging

RD234CF is a random copolymer. This grade is suitable for the manufacturing of unoriented films on chill roll processes. RD234CF contains antiblock and slip agents.

RD364CF - is a random copolymer This grade is suitable for the manufacturing of unoriented films on chill roll processes. CAS-No.: 9010-79-1 Applications RD364CF is recommended for: - Food packaging - Textile packaging film - High quality stationery film - Flower packaging - Lamination films Additives RD364CF is a slip, antiblock and antistatic formulated resin. Additives Content Antiblock (SiO2) 1800 ppm Borealis Method Slip 1500 ppm Borealis Method Calcium stearate Yes Antistatic agent Yes Borealis Method

RD366CF - is a random copolymer This grade is suitable for the manufacturing of unoriented films on chill roll processes. CAS-No.: 9010-79-1 Applications RD366CF is recommended for: - Food packaging - Textile packaging film - Stationary films - Flower packaging - Lamination films Additives RD366CF is a slip, antiblock and antistatic formulated resin. Additives Content Antiblock (SiO2) 1800 ppm Borealis Method Slip 1500 ppm Borealis Method Antistatic agent Yes Borealis Method Calcium stearate Yes Borealis Method

RD461CF is a random copolymer. This grade is suitable for the manufacturing of unoriented films on chill roll processes. RD461CF contains antistatic additives contains antiblock and slip agents.

RE239CF is a random copolymer This grade is suitable for the manufacturing of unoriented films on chill roll processes. CAS-No.: 9010-79-1 Applications RE239CF is recommended for: - Food packaging - Stationary films - Lamination films - Flower packaging Textile packaging film Additives RE239CF contains antiblock and slip agents Additives Content Antiblock (SiO2) 1800 ppm Borealis Method Slip (EAA) 2000 ppm Borealis Method Calcium stearate Yes Borealis Method

RE420MO is a specially modified highly-transparent polypropylene random copolymer with medium melt flow rate. This grade is intended for injection moulding and stretch blow moulding. It is designed for high-speed injection moulding and contains nucleating and demoulding additives. Products originating from this grade have excellent transparency, very good organoleptic properties, good balance of stiffness and impact strength at ambient temperature, low blooming and good demoulding properties. Applications - Lids - Pails - Closures - Sweet-boxes - Bottles - Houseware containers Special Features - stiffness and impact balance - Improved gloss and excellent transparency - Low blooming

RF365MO is a specially modified highly-transparent polypropylene random copolymer with medium melt flow rate. It is designed for high-speed injection moulding and contains nucleating and demoulding additives. Products originating from this grade have excellent transparency, very good organoleptic properties, good balance of stiffness and impact strength at ambient temperature, low blooming and good demoulding properties. Applications - Closures - Thin wall containers Special features - Improved gloss and excellent transparency - Excellent antistatic properties - Good impact strength - High stiffness

RF366MO is a specially modified highly-transparent polypropylene random copolymer with medium melt flow rate. This grade is designed for high-speed injection moulding and contains nucleating and antistatic additives. The improved processability, even at low melt temperature, allows energy savings and faster cycle time. Products originating from this grade have excellent transparency, good organoleptic properties, good balance of stiffness and impact strength at ambient temperatures. These properties, together with high gloss, make this grade excellent choice for household and packaging articles. RF366MO can be also used in injection stretch blow moulding (ISBM). RF366MO is intended for injection moulding applications requiring excellent transparency - Thin wall packaging - Houseware containers - Caps and closures - Sweet-boxes - Cosmetics - Appliances - Baby bottles Special Features: - Outstanding optical properties - Improved gloss and excellent transparency - Very good processability - Good organoleptic properties

RJ470MO is a specially modified highly-transparent polypropylene random copolymer with very high melt flow rate. It is designed for high-speed injection moulding and contains nucleating and demoulding additives. Additivation has been optimized to provide good antistatic and demoulding properties without blooming or plate-out problems. This polymer is a CR (controlled rheology) grade with narrow molecular weight distribution giving low warpage. Products originating from this grade have excellent transparency and gloss, and good balance of stiffness and impact strength at ambient temperatures. Applications - Lids - Square containers - Square boxes Special features - Good clarity - Good gloss - stiffness and impact balance

RP970 is a polypropylene compound intended for injection moulding. Applications RP970 has been developed especially for the car industry to be used in automotive interior parts. - Interior trims - Covers Special features - Good stiffness and impact balance - Very good flow