Extron 100 GF HS is a 10% glass fibre reinforced homopolymer polypropylene compound. It is a low flow injection moulding grade developed for components requiring high heat deflection temperatures and low moulding shrinkages. It is stabilized to meet automotive heat ageing requirements of 500hrs at 150°C.

Extron 100/2 GF is a 10% glass fibre reinforced homopolymer polypropylene compound. It is a medium to high flow injection moulding grade developed for components requiring high heat deflection temperatures and low moulding shrinkages.

Extron 200 GF HS 70104 is a 20% glass fibre reinforced homopolymer polypropylene compound. It is a low flow injection moulding grade developed for rigid components requiring high heat deflection temperatures and low mould shrinkages. It is stabilized to meet automotive heat ageing requirements of 500hrs at 150°C and contains a high loading of a fine particle size carbon black to provide good long term UV protection.

Extron 200 GF HS is a 20% glass fibre reinforced homopolymer polypropylene compound. It is a low flow injection moulding grade developed for rigid components requiring high heat deflection temperatures and low mould shrinkages. It is stabilized to meet automotive heat ageing requirements of 500hrs at 150°C.

EXTRON 200 GFS HSE is a glass fibre reinforced polypropylene compound. It is a low flow injection moulding grade developed for components requiring high rigidity and high heat deflection temperatures with improved creep resistance. It has been stabilized to meet heat aging requirements of 1000 hours at 150°C.

Extron 300 GF HS is a 30% glass fibre reinforced homopolymer polypropylene compound. It is a low flow injection moulding grade developed for rigid components requiring high heat deflection temperatures, excellent creep resistance and low mould shrinkages. It is stabilized to meet automotive heat ageing requirements of 500hrs at 150°C.

Extron 300 GFS UV3 is a 30% glass fibre reinforced coupled polypropylene compound. It is a low flow injection moulding grade developed for rigid components requiring high heat deflection temperatures and low mould shrinkages. It is UV stabilized for continuous outdoor exposure.

EXTRON 3007 FC is a 30% glass fibre reinforced polypropylene compound. It is a medium flow injection moulding grade developed for components requiring a combination of high rigidity, low shrinkage and improved creep resistance. It has been manufactured in accordance with Australian Standard AS 2070-1999 "Plastic Material for Food Contact Use". The ingredients used in this formulation are referenced in the US Code of Federal Regulations, Volume 21, parts 170-199.

Extron 3011 HS is a 45% glass fibre reinforced coupled polypropylene compound. It is a medium to high flow injection moulding grade developed for components requiring excellent creep resistance with high heat deflection temperatures, very high rigidity and good impact strength. It has been stabilized to meet automotive heat aging requirements of 21days at 150°C.

Extron 3012 UV3 is a 10% glass fibre reinforced coupled polypropylene compound. It is a medium flow injection moulding grade developed for components requiring high rigidity, good impact strength, high heat deflection temperatures and improved creep resistance. It is UV stabilised to withstand outdoor weathering.

Extron 3013 HS UV3 is a 20% glass fibre reinforced coupled polypropylene compound. It is a medium flow injection moulding grade developed for components requiring high rigidity, good impact strength, high heat deflection temperatures and improved creep resistance. It is UV stabilised to withstand long term outdoor weathering.

Extron 3013 is a 20% glass fibre reinforced coupled polypropylene compound. It is a medium flow injection moulding grade developed for components requiring high rigidity, good impact strength, high heat deflection temperatures and improved creep resistance.

Extron 3014 HS is a 30% glass fibre reinforced, impact modified, coupled polypropylene compound. It is a medium flow injection moulding grade developed for components requiring excellent creep resistance with high rigidity, high heat deflection temperatures and good impact strength. It is stabilised to withstand automotive heat ageing requirements of 21 days at 150°C.

Extron 3014 UV3 is a glass fibre reinforced, impact modified, coupled polypropylene compound. It is a medium flow injection moulding grade developed for components requiring excellent creep resistance with high rigidity, high heat deflection temperatures and good impact strength. It is UV stabilised to withstand long term outdoor weathering.

Extron 3018 is a 20% glass fibre reinforced coupled copolymer polypropylene compound. It is a medium to high flow injection moulding grade developed for components requiring excellent creep resistance with high heat deflection temperatures, high rigidity and good impact strength.

Extron 3019 GF HS is a 30% glass fibre reinforced coupled polypropylene compound. It is a medium flow injection moulding grade developed for components requiring high rigidity and high heat deflection temperatures with excellent creep resistance and good impact strength. It is stabilised to meet heat aging requirements of 21 days at 150°C.

EXTRON 3019 HS is a 30% glass fibre reinforced coupled polypropylene compound. It is a medium flow injection moulding grade developed for components requiring high rigidity and high heat deflection temperatures with excellent creep resistance and good impact strength. It is stabilised to meet heat aging requirements of 21 days at 150°C.

Extron 3029 UV3 is a 43% talc and glass fibre reinforced coupled polypropylene compound. It is a medium to high flow injection moulding grade developed for components requiring minimal shrinkage with high heat deflection temperatures, high rigidity and good impact strength. It is UV stabilized for continuous outdoor use.

Extron 3034 is a 30% combined talc/glass fibre reinforced coupled polypropylene compound. It is a medium to high flow injection moulding grade developed for components requiring high rigidity, and high heat deflection temperatures with improved creep resistance, good dimensional stability and a better surface than achieved with straight glass filled compounds.

EXTRON 3039 HS UV2 is a 30% combined glass fibre and mineral reinforced coupled polypropylene compound. It is a medium flow injection moulding grade developed for components requiring high rigidity, and high heat deflection temperatures with improved creep resistance, good dimensional stability and a better surface than achieved with straight glass filled compounds. It is stabilized to meet automotive interior and under bonnet requirements.

Extron 3039/3 HS UV2 is a 30% combined glass fibre and mineral reinforced coupled polypropylene compound that has been impact modified. It is a medium to high flow injection moulding grade developed to give components increased flexibility over standard glass mineral grades while still maintaining good rigidity and high heat deflection temperatures. Dimensional stability and surface appearance should also be better than that achieved with straight glass filled compounds. It has been stabilized to meet automotive heat aging and interior weathering requirements.

Extron 3047 UVH is a glass fibre reinforced polypropylene compound. It is a medium to high flow injection moulding grade developed for components requiring good rigidity and creep resistance. It contains a UV stabilizer system for outdoor weathering applications.

EXTRON 3049 HS UV2 is a 30% glass fibre reinforced coupled polypropylene compound. It is a medium to high flow injection moulding grade developed for components requiring high rigidity and high heat deflection temperatures with excellent creep resistance and good impact strength. It has been stabilised to meet automotive heat aging requirements and intermittent UV exposure.

Extron 3053 HS UV3 is a 23% glass fibre reinforced coupled polypropylene compound. It is a high flow injection moulding grade developed for components requiring excellent creep resistance with high rigidity, high heat deflection temperatures and good impact strength. It is stabilized for continuous outdoor exposure and to meet automotive heat ageing requirements of 500hrs at 150°C.

Extron 3066/5 UVH is a 30% glass fibre reinforced polypropylene compound. It is a medium to high flow injection moulding grade developed for components requiring excellent creep resistance with high shear strength. It has been stabilized to meet outdoor weathering requirements.

Extron 3082/7C HS UV2 is a 30% glass fibre reinforced coupled polypropylene compound. It is a low to medium flow injection moulding grade developed for components requiring high rigidity and high heat deflection temperatures with improved creep resistance and excellent oxidative stability even in the presence of transition metals.

Extron PDR 3082/7E HS UV2 is a 30% glass fibre reinforced coupled polypropylene compound. It is a low to medium flow injection moulding grade developed for components requiring high rigidity and high heat deflection temperatures with improved creep resistance and excellent weld strength. It has excellent oxidative stability, even in the presence of transition metals and has been stabilized for intermittent UV exposure.

Extron 3083 HS is a 50% glass fibre reinforced coupled polypropylene compound. It is a medium flow injection moulding grade developed for components requiring very high rigidity and excellent creep resistance with high heat deflection temperatures and good impact strength. It has been stabilized to meet automotive heat aging requirements of 21days at 150°C.

Extron 3083 HS3 is a 50% glass fibre reinforced coupled polypropylene compound. It is a medium flow injection moulding grade developed for components requiring very high rigidity and excellent creep resistance with high heat deflection temperatures and good impact strength. This grade has been heat stabilized for contact with hot water.

Extron 3085/3 UVH is a 40% glass fibre reinforced coupled polypropylene compound. It is a low flow injection moulding grade developed for thick walled components requiring excellent creep resistance with high heat deflection temperatures, high flexural modulus, high flexural strength and good impact strength. It has been stabilized to meet long term outdoor weathering requirements.

Extron 3085/6 UVH is a 40% glass fibre reinforced coupled polypropylene compound. It is a low flow injection moulding grade developed for thick walled components requiring excellent creep resistance with high heat deflection temperatures, high flexural modulus, high flexural strength and good impact strength. It has been stabilized to meet long term outdoor weathering requirements.

Extron 3102 HS UV3 is a glass reinforced, impact modified, coupled polypropylene compound. It is a medium flow injection moulding grade developed for components requiring soft touch, combined with good scratch resistance, high rigidity and good impact strength. It is UV stabilised to meet automotive interior requirements.

Extron 3102/1 HS UV3 is a 25% glass reinforced, impact modified, coupled polypropylene compound. It is a high flow injection moulding grade developed for components requiring soft touch, combined with good scratch resistance, high rigidity and good impact strength. It is heat and UV stabilised to meet automotive interior requirements.

Extron 3104 UVH is a 20% glass fibre reinforced polypropylene copolymer compound. It is a high flow injection moulding grade developed for components requiring excellent flexural strength and rigidity combined with high impact strength. It has been stabilized to meet outdoor weathering requirements.

Extron 3105 HS3 70177 is a 15% glass fibre reinforced coupled polypropylene compound. It is a medium flow injection moulding grade developed for components requiring high rigidity, good creep resistance and impact strength. It has been stabilized for contact with hot water.

Extron 3106 UVH is a 15% glass fibre reinforced coupled polypropylene copolymer compound. It is a high flow injection moulding grade developed for components requiring excellent flexural strength and rigidity combined with high impact strength. It has been stabilized to meet outdoor weathering requirements.

EXTRON 3107 is a 25% glass fibre reinforced coupled polypropylene compound. It is a medium to high flow injection moulding grade developed for components requiring high rigidity and high heat deflection temperatures with excellent creep resistance and good impact strength.

Extron 3108 UV2 is a 30% glass/mineral reinforced coupled polypropylene compound. It is a low flow extrusion grade developed for rigid components requiring good impact strength and is manufactured in accordance with Australian Standard AS 2070, "Plastic Materials for Food Contact Use". The material is UV stabilized for intermittent outdoor exposure.

Extron 3108/1 UV2 is a 50% glass/mineral reinforced coupled polypropylene compound. It is a low flow extrusion grade developed for rigid components requiring good impact strength and is manufactured in accordance with Australian Standard AS 2070, "Plastic Materials for Food Contact Use". The material is UV stabilized for intermittent outdoor exposure.

Extron 3131 GF Natural is a 20% glass fibre reinforced coupled homopolymer polypropylene compound. It is a high flow injection moulding grade developed for high gloss components requiring high rigidity and high heat deflection temperatures.