ISPLEN® PP 080 G2M is a homopolymer grade with a high fluidity intended for injection moulding. It is characterised by good flow properties that enables to fill the mould easier and by short cycle times with big articles. Articles manufactured with this grade have excellent chemical resistance, are easily decorated and can accept different colouring systems. TYPICAL APPLICATIONS ISPLEN® PP 080 G2M is widely used for the production of consumer goods such us: - Food containers and rigid packaging. - Vacuum and cosmetic flasks. - Garden and domestic furniture - Base product for compounds Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PP 084 D2M is a polypropylene homopolymer of high fluidity for injection moulding. It is specifically intended for applications that require end articles with very low surface friction. The grade is characterised by excellent flow properties that facilitates an easy mould filling as well as a quick release from the mould. Articles produced with this grade have good physical properties, excellent chemical resistance and easy printability. TYPICAL APPLICATIONS ISPLEN® PP 084 D2M has been specifically designed for the production of articles that need short cycles times, easy handling and low resistance during manipulation in automatic or robotized production lines, such us: - Caps and closures - Screw caps - Components for spray dispensers. - Pistons for one use syringes, needle covers and other lab equipment (tubes, pipettes...). - Garden furniture. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PP 084 Y1E is a medium-high melt flow rate polypropylene homopolymer with narrow molecular weight distribution which provides optimum processing in fibre lines of high speed (BCF/CF and spunbond). It includes a specific formulation resistant to "gas fading" coloration, suitable for protecting the polymer during extrusion process and final use. TYPICAL APPLICATIONS - Indicated for the extrusion of staple fibre and BCF/CF in lines of high speed. - Specially recommended for technical nonwovens in spunbond lines. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PP 086 U6E is a high melt flow rate polypropylene homopolymer with narrow molecular weight distribution which provides optimum processing in fibre lines of high speed (BCF/CF and spunbond). It includes a specific formulation resistant to "gas fading" coloration, suitable for protecting the polymer during extrusion process and final use. Moreover, it contains additives to increase the resistance to UV radiation. TYPICAL APPLICATIONS - Indicated for the extrusion of staple fibre and BCF/CF in lines of high speed. - Specially recommended for technical nonwovens in spunbond lines. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PP 086 Y1E is a high melt flow rate polypropylene homopolymer with narrow molecular weight distribution which provides optimum processing in fibre lines of high speed (BCF/CF and spunbond). It includes a specific formulation resistant to "gas fading" coloration, suitable for protecting the polymer during extrusion process and final use. TYPICAL APPLICATIONS - Indicated for the extrusion of staple fibre and BCF/CF in lines of high speed. - Specially recommended for technical and hygienic nonwovens in spunbond lines. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PP 088 Y1E is a high melt flow rate polypropylene homopolymer with narrow molecular weight distribution which provides optimum processing in fibre lines of high speed (BCF/CF and spunbond). It includes a specific formulation resistant to "gas fading" coloration, suitable for protecting the polymer during extrusion process and final use. TYPICAL APPLICATIONS - Indicated for the extrusion of staple fibre and BCF/CF in lines of high speed. - Specially recommended for technical and hygienic nonwovens in spunbond lines. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PP 089 Y1E is a high melt flow rate polypropylene homopolymer with narrow molecular weight distribution which provides optimum processing in fibre lines of high speed and large production capacity (BCF/CF and spunbond). It includes a specific formulation resistant to "gas fading" coloration, suitable for protecting the polymer during extrusion process and final use. TYPICAL APPLICATIONS - Indicated for the extrusion of staple fibre and BCF/CF in lines of high speed. - Specially recommended for hygienic nonwovens in spunbond lines of the latest generation. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PP 090 G2M is a polypropylene homopolymer with a very high fluidity intended for injection moulding. It is characterised by good flow properties that facilitates an easy mould filling and short cycle times with big articles. Articles manufactured with this grade have excellent chemical resistance, are easily decorated and can accept different colouring systems. TYPICAL APPLICATIONS ISPLEN® PP 090 G2M is widely used for the production of consumer goods such us: - Food containers. - Rigid packaging. - Garden and domestic furniture. - Pistons for one use syringes, needle covers and other lab equipment. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PP 094 N2M is a polypropylene homopolymers of very high fluidity intended for injection moulding. It is a nucleated grade and is characterised by good flow properties that facilitates an easy mould filling and short cycle times. Due to the specific crystalline structure, at the same time, it exhibits high stiffness and low warpage. Articles manufactured with this grade have excellent chemical resistance, are easily decorated and can accept different colouring systems. TYPICAL APPLICATIONS ISPLEN® PP 094 N2M is widely used for the production of consumer goods such us: - Food containers. - Rigid packaging with very thin walls. - Toys and small appliances. - Garden and domestic furniture. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PP 099 K2M is a high fluidity nucleated polypropylene homopolymer designed for injection moulding applications. It is characterised by its excellent processability which allows for quick, easy filling of moulds and ultra short cycles. Moreover, because of its special crystalline configuration, it has high stiffness and very low warpage. Articles manufactured with this grade have excellent chemical resistance, are easily decorated and can accept different colouring systems. ISPLEN® PP 099 K2M is formulated with an antistatic additive package to permit the dispersion of static charges accumulated on the article surface avoiding anti-aesthetic dust deposits during storage or exhibition. Additive package also facilitates material processing and makes it easier to extract the pieces from the mould. TYPICAL APPLICATIONS ISPLEN® PP 099 K2M is widely used for the production of consumer goods such us: - Rigid packaging with very thin walls. - Video boxes. - Screw caps and closures. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PP099X2M is a very high fluidity homopolymer polypropylene designed for special optical requirements for injection moulding applications achieving very similar optical properties than a PP random. Due to its structure and additive package, ISPLEN® PP 099 X2M offers good transparency, excellent gloss and high stiffness. In addition, the grade shows very low warpage and its excellent processability allows an easy filling of moulds and short cycle times. TYPICAL APPLICATIONS - Rigid packaging with very thin walls. - Video boxes. - Screw caps and closures. Recommended melt temperature range from 200 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PR210X6E is a random ethylene-propylene copolymer with a high molecular weight. It contains a specific formulation for high thermal stability and water extraction purposes. ISPLEN® PR210X6E is supplied in natural colour. TYPICAL APPLICATIONS - Cold and hot water pressure pipe. Recommended melt temperature range from 205 to 225°C. Processing conditions should be optimised for each production line.

ISPLEN® PR230C1E is a medium-low melt flow rate propylene-ethylene random copolymer with good transparency, high gloss and excellent surface finish. It is formulated with additives according to the end use of the item in order to reinforce the thermal stability. ISPLEN® PR230C1E can be easily coloured during the extrusion process using the right pigments, preferably in the form of concentrates with a higher melt flow rate than that of the base polymer. TYPICAL APPLICATIONS In extrusion and blow-moulding processes that require high transparency and gloss: - Blow-moulding extrusion. Specially recommended for detergents and cosmetics due to its high ESCR - Sheet Extrusion - Thermoforming Recommended melt temperature range from 185 to 215°C. Processing conditions should be optimised for each production line.

ISPLEN® PR 240 G1F is a medium melt flow rate propylene-ethylene random copolymer, with a basic formulation, adapted for extrusion. It does not include any antistatic agent or nucleating additives in its formulation. It can be easily coloured during the extrusion process using the right pigments, preferably in the form of concentrates with a higher melt flow rate than that of the base polymer. TYPICAL APPLICATIONS - Sheets and thermoforming. Corrugated cardboard. - Non-oriented film, Cast-film - Flexible Pipes Recommended melt temperature range from 190 - 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PR 264 G1F is a polypropylene random copolymer with medium melt flow rate propylene-ethylene random copolymer. Films prepared with ISPLEN® PR 264 G1F have both excellent optical properties and mechanical properties, and is normally used for packaging (foodstuffs, textiles, stationery, organizational office aids, flowers…). In co-extrusion or lamination it gives the film good heat-sealing characteristics. It can be easily coloured during the extrusion process using the right pigments, preferably in the form of concentrates with a higher melt flow rate than that of the base polymer. TYPICAL APPLICATIONS In applications requiring high transparency and gloss: - Extrusion and/or Co-extrusion - Non-oriented film, Cast-film - Tubular quench Recommended melt temperature range from 190 - 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PR 264 M1F is a polypropylene random copolymer with medium melt flow rate. Its specific formulation (antiblocking and slip agents) makes its procesability and rheological properties particularly suitable (pure or blended) for film application. Any antiestatic additive neither additive with SML (Food contact CE/2002/72) are included in its formulation. Films prepared with ISPLEN® PR 264 M1F have both excellent optical properties and mechanical properties, and is normally used for packaging (foodstuffs, textiles, stationery, organizational office aids, flowers). In co-extrusion or lamination it gives the film good heat-sealing characteristics. It can be also used for injection moulding applications in which high mechanical properties are required. TYPICAL APPLICATIONS In applications requiring high transparency and gloss: - Extrusion and/or Co-extrusion - Non-oriented film, Cast-film - Tubular quench - For injection moulding applications, like caps and closures. Recommended melt temperature range from 190 - 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PR 280 P1M is a polypropylene random copolymer with high fluidity intended for injection moulding of highly transparent articles. It is characterised by a specific molecular structure that combines good flow properties, good impact resistance at ambient temperatures and low warpage. ISPLEN® PR 280 P1M contains an additive package that permits the dispersion of static charges accumulated on the surface, preventing anti-aesthetic dust patterns during storage or exhibition and, besides, reducing internal stresses and making it easier to extract the pieces from the mould. TYPICAL APPLICATIONS ISPLEN® PR 280 P1M is particularly suitable for applications requiring high transparency, good processability, low tendency to warp and moderate impact resistance: - Houseware containers (square and cylindrical shape). - Transparent boxes and crates for domestic and professional storage. - Caps, lids and closures (screw caps, with living hinge, smooth touch for cosmetic...) - Aesthetic appliances: furniture, toys, electrical equipment, sports, leisure, cups... Recommended melt temperature range from 210 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PR 290 P1M is a polypropylene random copolymer with a very high fluidity intended for injection moulding of transparent articles. It is characterised by good flow properties that facilitates an easy mould filling and very short cycle times. Due to the specific crystalline structure, at the same time, exhibits high toughness at ambient temperatures and low warpage. It contains an additive package that reduces anaesthetic dust patterns during storage and, besides, reduces internal stresses and facilitates article release from the mould. TYPICAL APPLICATIONS ISPLEN® PR 290 P1M is widely applied for the high speed production of thin-walled articles where dimensional stability is important and excellent clarity are required: - Houseware containers (square and cylindrical shape). - Transparent boxes and crates for domestic and professional storage. - Thin wall containers for foodstuffs: yoghurt, dairy products, fast food, candies, sauces... - Technical appliances: furniture, toys, electrical equipment, sports, leisure... Recommended melt temperature range from 210 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PR 290 X9M is a polypropylene random copolymer with a very high fluidity intended for injection moulding. In addition to good transparency, it also shows superior impact properties compared to standard random copolymers, especially at low temperatures. At 0°C, impact strength is similar to heterophasic copolymers of the same fluidity. Due to its excellent processability, it is particularly suitable for injection moulding applications used in the manufacture of very thin walled articles. It includes a package of additives that allows dispersion of static charges accumulated on the surface, preventing the formation of dust deposits and making it easier to extract the pieces from the mould. TYPICAL APPLICATIONS ISPLEN® PR 290 X9M has been specifically designed for the manufacture of very thin-walled articles with high mechanical properties at low temperatures, high dimensional stability and excellent clarity: - Home containers for cold storage (‘from the freezer to the microwave'). - Boxes, crates, pails and containers for home and professional storage. - Very thin-walled containers for chilled storage: ice cream, dairy products, vegetables... Recommended melt temperature range from 210 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PR 295 C1M is a polypropylene random copolymer with a very high fluidity intended for injection moulding of transparent thin walled articles. It is characterised by good flow properties that facilitates an easy mould filling and very short cycle times. Due to the specific crystalline structure it exhibits a high toughness at ambient temperatures and high dimensional stability. The resin exhibits an excellent balance of properties: clarity, stiffness, impact strength and processability TYPICAL APPLICATIONS ISPLEN® PR 295 C1M is widely applied for the high speed production of thin-walled articles such as: - Houseware containers (square and cylindrical shape). - Transparent boxes and crates for domestic and professional storage. - Thin wall containers for foodstuffs: yoghurt, dairy products, fast food, candies, sauces... - Technical appliances: furniture, toys, kitchen equipment… Recommended melt temperature range from 210 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PR 299 C1M is a random copolymer with a very high fluidity intended for injection moulding of transparent thin walled articles. It is characterised by good flow properties that facilitates an easy mould filling and very short cycle times. Due to the specific crystalline structure it exhibits a high toughness at ambient temperatures and high dimensional stability. TYPICAL APPLICATIONS ISPLEN® PR 299 C1M is designed for the high speed production of thin-walled articles such as: - Houseware containers (square and cylindrical shape). - Transparent boxes and crates for domestic and professional storage. - Thin wall containers for foodstuffs: yoghurt, dairy products, fast food, candies, sauces... - Technical appliances: furniture, toys, kitchen equipment… Recommended melt temperature range from 210 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PR210G4E is a random ethylene-propylene copolymer with a high molecular weight. It contains a basic antioxidant stabilization for the pipe extrusion that guarantees the stability of the polymer under normal processing. The additives used are compatible with any others that the customer might wish to add. ISPLEN® PR210G4E is supplied in natural colour. TYPICAL APPLICATIONS - Base polymer for cold and hot water pressure pipes.

ISPLEN® RC 580 S2M belongs to a new range of highly transparent family specially designed to satisfy the more exigent necessities of the market. PROCESSING ADVANTAGES - It allows reducing the cycle time, due to its higher crystallization temperature. - By its higher stiffness, it increases the mechanical properties of the articles manufactured. Lower tendency to warpage. - Due to the improved optical properties, it is possible to produce articles of higher thickness, maintaining a very good aesthetic result. The haze of this new product in a 2 mm plate is equivalent to the haze of a standard random copolymer in a 1mm plate. TYPICAL APPLICATIONS ISPLEN® RC 580 S2M is specially indicated for applications where the optical properties are really demanding, and in addition is necessary a good processability: - Thick houseware containers (square and cylindrical shape). - Transparent boxes and crates for domestic and professional storage. - ISBM bottles for different applications - Baby's bottles Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® RC 590 S2M belongs to a new range of highly transparent family specially designed to satisfy the more exigent necessities of the market. PROCESSING ADVANTAGES - It allows reducing the cycle time, due to its higher crystallization temperature. - By its higher stiffness, it increases the mechanical properties of the articles manufactured. Lower tendency to warpage. - Due to the improved optical properties, it is possible to produce articles of higher thickness, maintaining a very good aesthetic result. The haze of this new product in a 2 mm plate is equivalent to the haze of a standard random copolymer in a 1mm plate. TYPICAL APPLICATIONS ISPLEN® RC 590 S2M is specially indicated for applications where the optical properties are really demanding, and in addition is necessary a good processability: - Thick houseware containers (square and cylindrical shape). - Transparent boxes and crates for domestic and professional storage. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.