H 605 is a low melt flow rate homopolymer with high transparency. This resin is designed for extrusion and thermoforming. H 605 exhibits excellent processability, high output, excellent stiffness/impact strength balance, high melt strength, outstanding optical properties and low odor/taste transfer. Applications: Sheets, Highly transparent thermoformed packages for food, cosmetic, health care and cleaning products, Flat and corrugated sheets for school and office folders Processing: Thermoforming, General Extrusion

H 606 is low melt flow rate homopolymer with general purpose additive package. This resin is designed for extrusion and thermoforming. H 606 presents excellent processability and high output, excellent stiffness/impact strength balance, high melt strength and low odor/taste transfer. Applications: Sheets, General corugated sheets, Thermoformed packaging for food, cosmetic, health care and cleaning products Processes: Thermoforming, General Extrusion

H 611 is a low melt flow rate homopolymer, specially designed for exposure of solar light applications. This product exhibits good processability and high melt resistance. Applications: Big bags; Building shade fabrics, Curtains and covers to aviary and agriculture, Geotextiles Processing: Raffia Extrusion

H 612 is a low melt flow rate homopolymer with broad molecular weigth distribution, specifically formulated for long time stabilization in order to withstand applications subject to direct sunlight. Presents excellent processability and productivity, high gloss, good stiffness and mechanical resistance. Applications: Big bags; Building shade fabrics, Curtains and covers to aviary and agriculture, Geotextiles Processing: Raffia Extrusion

H 614 is a low melt flow rate polypropylene homopolymer, stabilized for applications that demand direct exposure to sunlight, specially designed for the production of big bags. It has good processability and high melt resistance. Applications: Big bags; Building shade fabrics; Curtains and covers to aviary and agriculture, Geotextiles Processing: Raffia Extrusion

Good optics, good gauge control, high drawability Applications Suggested uses include BOPP film, extrusion and thermoforming where improved melt strength is desired

BRASKEM H357-09RSB resin is a Polypropylene homopolymer suitable for high output, fast running cast film lines and injection molding processes. BRASKEM Polypropylene H357-09RSB is a controlled rheology resin optimized for easy film winding and cutting as well as good printability after corona treatment. Films based on Braskem Polypropylene H357-09RSB exhibit excellent optical film properties. Braskem Polypropylene H357-09RSB resin contains slip and antiblocking additives. Applications: - Food packaging (bakery, snacks) - Textile packaging (shirts, hosiery, blankets, sweaters) - Printed materials (books, magazines, journals, stationary) Process: - Cast film - Injection molding

Consistent processability, good color stability, low water carryover, high speed processing Applications Suggested uses include nonwoven applications

BRASKEM H502-25RG is a resin suitable for the use in continuous filaments applications and other fibers spinning process. BRASKEM H502-25RG is offering excellent processability at melt temperatures between 220 and 280°C and is modified with an anti-gas fading formulation. Applications: - Health and hygiene - Carpet face yarns, protective clothing, Filtration - Geotextiles, Agricultural materials, Upholstery - General injection molding Process: - Continuous filament and Fiber spinning equipment

Injection molding, general purpose, low water carryover Applications Suggested uses include tape, slit-film fibers, containers, closures, housewares

General purpose Applications Suggested uses include injection molding processes

BRASKEM H7058-25R Resin is a Polypropylene homopolymer developed for thin wall injection molding offering an easy flow and a good balance of physical properties. Applications: - Thin wall containers - Household articles - Packaging - Toys Process: - Injection molding.

BRASKEM H734-52RNA Polypropylene Resin is a homopolymer developed for thin wall, high speed injection molding. BRASKEM H734-52RNA Polypropylene Resin is a high flow homopolymer with a good balance of physical properties. BRASKEM H734- 52RNA Polypropylene Resin contains a very efficient antistatic package and offers good transparency when required. BRASKEM H734-52RNA Polypropylene Resin is designed and formulated to allow for very easy processing, short cycle times, low shrinkage, minimal warpage and good part dimensional stability. Applications: - Thin wall food packaging - Thin wall cosmetic packaging - Housewares - Appliances - Caps & closures - Videocassette boxes - Office accessories & pens Process: - Injection Moulding

HP 427J is a low fluidity homopolymer with good processability. The product is suitable for both as monolayer and coextruded structures. It does not contain any slip or anti-blocking agents. Applications: BOPP Film, BOPP film with high retention property of the surface treatment Processing: BOPP Film

HP 500D is a low melt flow homopolymer, with high stiffness and impact strength. Applications: Food packaging, Bottles, Pipes, Profiles, Sheets, Cosmetics, High stiffness articles, Strapping Processing: General extrusion., Extrusion Blow Molding

HP 502H is a low melt flow homopolymer. Applications: Bottles Processes: Extrusion Blow Molding, Thermoforming

HP 502N is a homopolymer with average fluidity and high stiffness. Applications: Houseware, Plastic furniture, Caps Processing: Injection Molding

Homopolymer HP 523J is a low fluidity homopolymer with good processability. The product is suitable for both as monolayer and coextruded structures. It does not contain any slip or anti-blocking agents. Applications: Adhesive tapes, Food packaging, BOPP film by the plan process (stenter) or balloon (doublebubble), BOPP film with high retention property of the surface treatment , Labels, Pearlized opaque films, Metalized film Processing: BOPP Film

HP 550R is a high fluidity homopolymer. Applications: Caps, Carpets, Home appliances, Houseware, Ropes, Textile Applications Processing: Extrusion of Fibers, Injection Molding

HP 648S is an extra high fluidity homopolymer, with controlled rheology and nucleating agent. Applications: Caps, Home appliances, Thin wall houseware, Thin wall packaging Processing: Injection Molding

BRASKEM HSP165G Polymer is a homopolymer resin designed for staple fiber production and applications requiring high speed spinning filaments. BRASKEM HSP165G Polymer can also be used in the injection molding process. BRASKEM HSP165G Polymer is modified to resist gas fading effect. Applications: - Nonwovens for health and hygiene and industrial applications - Geotextiles - Upholstery - Containers Process: High speed spinning fiber extrusion and injection molding.

BRASKEM HSP250NA Polypropylene is a homopolymer resin developed for injection molding. BRASKEM HSP250NA Polypropylene resin has a very good balance of physical properties and excellent organoleptics. BRASKEM HSP250NA Polypropylene resin is nucleated and contains a very efficient anti static package offering good transparency when required. It is designed and formulated to allow for very easy processing, short cycle times, low warpage and good part dimensional stability. Processing conditions: BRASKEM HSP250NA is easy to process with common extrusionequipment with conditions depending on the type of injection molding conversion technology applied. Recommended melt temperature range for injection molding from 210 to 260°C; mold temperature: 20 to 50°C; holding pressure: 200 to 500 bar. Additivation: Nucleating Agent, Antistatic Agent Applications: Caps & Closures, Cosmetic packaging, Houseware, Home appliances Process: Injection molding.

JE 6190 is a low fluidity homopolymer. It is formulated with nucleating and slip agents. Applications: Caps for carbonated soft drinks, Caps for water

Excellent color and processing stability, excellent long term heat aging properties, wet/dry environment resistance Applications Suggested uses include automotive, housewares, toys, furniture Process UL Approved

PCD 0140 is a low melt flow rate heterophasic copolymer with high impact resistance. This resin was developed for steel pipe coating extrusion. PCD 0140 is highly protected against thermal ageing and designed for continuous use at high temperature. Applications: Solid Thermal Insulation Layer, Undercoating, solid thermal coating and foam thermal coating Processing: Steel Pipe Coating

PCD 0140BR is a low melt flow rate heterophasic copolymer with high impact resistance. This resin was developed for steel pipe coating extrusion. PCD 0140BR is highly protected against thermal ageing, designed for continuous use at high temperature, and UV stabilized. External three layer extruded polypropylene (topcoating) based coatings for corrosion protection of welded and seamless steel pipes (3LPP). Topcoating and undercoating in thermal insulation coating of steel pipes. Applications: External three layer extruded based coatings for corrosion protection of steel pipes, Topcoating and undercoating in thermal insulation coating of steel pipes Processing: Steel Pipe Coating

PD 943 XP is a medium melt flow rate homopolymer, with slip and antiblocking agents. It is suitable for blown film extrusion. This product features good impact strength, excellent gloss and transparency, good slipping and good weldability. Applications: Food packaging, Roll films for automatic packaging, Textile Applications Processing: Blown Film Extrusion

PF260GQ is a high melt flow rate polypropylene homopolymer with a narrow molecular weigth distribution and AGF stabilization. It has been specially designed for fiber extrusion and it is suitable for the production of high tenacity fibers and nonwoven spunbonded fabrics. This grade has excellent processability due to both outstanding melt stability and great filterability characteristics, affording it to deliver high productivity rates in high speed lines. Applications: Continuous filament for sewing thread, Nonwoven Fibers, Nonwovens for furniture and decoration, high-speed fiber spinning - continuous filament yarns, High tenacity fibers, High performance spunbonded nonwovens for hygienic disposables and hospital products Processing: Extrusion of Fibers, Extrusion of Monofilaments, Spunbond nonwovens

PF33 is a low fluidity homopolymer with good rigidity. It does not contain any slip or antiblocking agents. Applications: BOPP film by the plan process (stenter) for food packaging, Adhesive tapes, labels, and metallized films, Flexible packaging (BOPP) Processing: BOPP Film

PF350GQ is a high melt flow rate homopolymer designed for spunbond nonwoven production. This resin features an excellent processability, allowing increased line speed or air pressure, as well as gains of mechanical properties. The narrow molecular weight distribution, special stability and tight gel control, provide its unique performance. Applications: Low-title and/or high-speed spinning multifilaments, Nonwovens for furniture and decoration, High performance spunbonded nonwovens for hygienic disposables and hospital products Processing: Extrusion of Fibers

Homopolymer PG480 is a polypropylene resin additivated for general purposes and suitable for raffia. This product exhibits an excellent processability and high-speed production with good melt stability. Applications: Big Bags, Brush bristles, Broom bristles, Curtains and covers for aviary and agriculture, staple fiber needle punched carpets, Carpet backing, Raffia, Industrial Sacks Processes: Extrusion of Fibers, Raffia Extrusion

Homopolymer Excellent color and overall manufacturing performance, superior optical and mechanical properties, broad processing window Applications Suggested uses include cast film or as a surface layer in BOPP applications

PH 0130 is a low melt flow rate additivated homopolymer used for general purposes. This resin is designed for blow moulding and extrusion. PH 0130 features excellent processability and stiffness/impact strength balance. Applications: Bottles for mineral water, juices, cosmetics and general uses, Flat and corrugated sheets, Profiles, Ropes, Tapes in general, Tear tape Processing: Blow Moulding, General Extrusion

PH 0950 is a medium melt flow rate homopolymer with antiblocking agent. PH 0950 is specially designed for twisted films produced even by cast or blown film extrusion. It exhibits excellent optical properties and good processability. Applications: Twist wrap Processing: Blown Film Extrusion, Cast Film Extrusion

PH 0952 is a medium melt flow rate homopolymer, with slip and antiblocking agents. This product is designed for technical films segment and packaging for cast and blown film extrusion. This product features excellent optical properties and good processability. Applications: Films for lamination, Food packaging, Roll films for automatic packaging, Textile Applications, Very thin film on high-speed line, low thickness. Processing: Blown Film Extrusion, Cast Film Extrusion

Homopolymer offering a broad processing window and excellent stiffness in a non-nucleated, non-phosphite resin. Applications Primarily designed for film extrusion and suitable for siliconized release liner film.

High performance high crystalline nucleated homopolymer with exceptional stiffness and excellent long term heat aging properties Applications Extrusion and injection processes, Home appliances, Compounding applications Process UL 94HB

PRB 0131 is a low melt flow rate random copolymer with high transparency. This resin is designed for thermoforming, blow moulding and extrusion. This product exhibits an excellent processability, low haze and excellent impact strength. Applications: Mineral Water Reusable Bottles, High transparency sheets, Toy kit, Highly transparent thermoformed packages for food, cosmetic, health care and cleaning products Processing: Extrusion Blow Molding, Thermoforming, General extrusion.

Impact Copolymer Description Developmental high melt flow impact copolymer with high stiffness, high impact, and excellent transparency in thin-walled injection molded containers and parts. Applications Suggested uses include thin-wall injection molding for parts thinner than 25 mils

PRISMA® 6410 is a random copolymer of low melt flow, with excellent balance of mechanical properties and high transparency for wall thickness up to 2.0 mm. Applications: Extrusion-Blow Molding of bottles, housewares, which require high-transparency. Processing: Extrusion Blow Molding