PRE-ELEC® PP 1353 is a conductive thermoplastic concentrate based on polypropylene. Conductivity is achieved by using special conductive carbon black. It contains a high load of carbon black and has been developed to be used as a masterbatch. Dilution rate of 65% can be achieved depending on the required conductivity level. The actual amount should always be tested as it also depends on the processing parameters. Dilution with PP-H is recommended in fiber applications. The values with the exception of MFR are measured from dilution: 50% PP-H, MFI 35 (230°C/2,16 kg)

PRE-ELEC® PP 1370 is a conductive thermoplastic compound based on polypropylene. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity, it has an excellent balance of mechanical properties and is easy to injection mould.

PRE-ELEC®PP 1375 is a carbon black filled conductive polypropylene compound with high MFR. In addition to a low electrical resistivity, it has an excellent balance of mechanical properties and is easy to injection-mould.

PRE-ELEC® PP 1392 is a carbon black filled conductive thermoplastic compound based on polypropylene. In addition to a low electrical resistivity, it has an excellent balance of mechanical properties and is easy to injection mould.

PRE-ELEC® PP 1393 is a conductive thermoplastic concentrate based on polypropylene. Conductivity is achieved by using special conductive carbon black. It contains a high load of carbon black and it can be diluted with virgin or recycled PP. The actual amount should always be tested as it also depends on the processing conditions. The values with the exception of MFR are measured from dilution: 30% PP-C, MFI 13 ( 230°C/2.16 kg)

PRE-ELEC® PP 1397 is a conductive thermoplastic compound based on polypropylene. The conductivity is achieved by using special conductive carbon black.The product has excellent mechanical properties and is easy to extrude.

PRE-ELEC® PP 15392 is electrically conductive thermoplastic concentrate based on polypropylene. Conductivity is achieved by using special conductive carbon black. It contains a high load of carbon black and it can be diluted preferably with PP-C. The actual amount should always be tested as it also depends on the processing parameters. The values with the exception of MFR and HDT are measured from dilution: 50% PP-C, MFI 3,5 (230°C/2.16 kg).

PRE-ELEC® PP 16156 is a very conductive thermoplastic concentrate based on polypropylene. The conductivity is achieved by using special conductive carbon black.In addition to a low electrical resistivity, it has excellent processability in cast film extrusion.

PRE-ELEC® PP 17147 is a proprietary formulation developed for applications requiring EMI-shielding properties. It is easy to injection mould and has excellent properties combined with low mould shrinkage and much higher HDT- values than typical polypropylenes. The material's color is black.

PRE-ELEC® PP 18220 is a semiconductive thermoplastic compound based on polypropylene for cable applications with good low temperature properties. The compound features premium surface quality and dispersion of carbon black. It is easy to extrude with high and consistent level of quality.

PRE-ELEC® PP 18873 is a carbon black filled electrically conductive polypropylene compound with flammability rating of V-0 at 3mm specimen thickness according to UL94 categories. The flame retardancy has been achieved with non-halogenated flame retardant agents.

PRE-ELEC® PP 18900 is electrically conductive thermoplastic concentrate based on polypropylene. Conductivity is achieved by using special conductive carbon black. It contains a high load of carbon black and it can be diluted with virgin or recycled PP. The actual amount should always be tested as it also depends on the processing conditions.

PRE-ELEC® PP 18920 is a semiconductive thermoplastic compound based on polypropylene for cable applications with good low temperature properties. The compound features premium surface quality and dispersion of carbon black. It is easy to extrude with high and consistent level of quality.

PRE-ELEC® PP 18999 is a conductive thermoplastic concentrate based on polypropylene. Conductivity is achieved by using special conductive carbon black. It contains a high load of carbon black and it can be diluted with virgin or recycled PP. The actual amounts should always be tested as it also depends on the processing conditions. This product offers a cost-effective solution for big injection moulding articles.

PRE-ELEC® PP 19136 is electrically dissipative thermoplastic compound based on polypropylene. The electrical dissipation is achieved by using special conductive carbon black. In addition to stable surface resistance between 1E5-1E8 ohms, it has an excellent balance of mechanical properties and is easy to injection mould.

PRE-ELEC® PP 19161 is a conductive thermoplastic compound based on polypropylene. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity, it has an excellent balance of mechanical properties and is easy to injection mould.

PRE-ELEC® PP 19279 is electrically conductive thermoplastic concentrate based on polypropylene. Conductivity is achieved by using special conductive carbon black. It contains a high load of carbon black and it can be diluted with virgin or recycled PP. The actual amount should always be tested as it also depends on the processing conditions. The values with the exception of MFR are measured from dilution: 30% PP-C, MFI 4 (230°C /2.16 kg).

PRE-ELEC® PP 19285 is a conductive thermoplastic compound based on medical grade polypropylene. Conductivity is achieved by using special conductive carbon black. The product features good statistical performance in terms of constant product properties with minimized amount of residual impurities. The product is designed for injection moulding of precise thin-walled articles with high quality requirements, such as pipette tips in automated liquid handling robots and testing devices with capacitive liquid level detection. Features - Electrically conductive - USP Plastics Class VI - Heat stabilized Applications - Pipette tip - Robotic tip - Technical parts

PRE-ELEC® PP 19599 is a conductive thermoplastic compound based on polypropylene. The material is easy to process. Contains impact modification and thermal stabilization.

PRE-ELEC® PP 6735 is a conductive thermoplastic compound based on medical grade polypropylene. Conductivity is achieved by using special conductive carbon black. The product features good statistical performance in terms of constant product properties with minimized amount of residual impurities. The product is designed for injection moulding of precise thin-walled articles with high quality requirements, such as pipette tips in automated liquid handling robots and testing devices with capacitive liquid level detection. Features - Electrically conductive - USP Plastics Class VI - Free of DNase, RNase and PCR inhibitors Applications - Pipette tip - Robotic tip - Technical parts

PRE-ELEC® PP PP19625 is a conductive thermoplastic compound based on polypropylene. It has good mechanical properties and can be combined with PP dilution polymer of choice. The values with the exception of MFR are measured from dilution: 50% PP-C, MFI 3.5 (230°C / 2.16 kg)

PRE-ELEC® TP 14815 is a carbon black filled electrically conductive polypropylene compund with flammability rating of V-0 at 3mm specimen thickness according to UL94 categories. The flame retardancy has been achieved with non-halogenated flame retardant agents. Applications: ATEX