STYRON A-TECH™ 1110 advanced technology polystyrene resin is a high-gloss, high-impact resin for injection molding applications. Main Characteristics: - Excellent toughness - High gloss Applications: - Small appliances - Toys - Printers - Remote controls Complies with: - U.S. FDA 21 CFR 177.1640 - Consult the regulation for complete details.

STYRON A-TECH™ 1173 advanced technology polystyrene resin is a high impact, environmental stress crack resistant (ESCR) resin for extrusion thermoforming applications. The improved rigidity of this resin allows potential down-gauging and scrap reduction, as well as overall improvements in process efficiency. Main Characteristics: - Easy processing - Outstanding thermoformability - Good practical toughness - ESCR performance Complies with: - U.S. FDA 21 CFR 177.1640 - Consult the regulation for complete details. Applications: - Large appliance/refrigerator liners - Other deep draw extrusion thermoforming applications

STYRON A-TECH™ 1175 advanced technology polystyrene is a high impact, environmental stress crack resistant (ESCR) resin, designed for extrusion and thermoforming applications, especially for the refrigeration industry. Based on patented technology, this resin allows for potential downgauging and scrap reduction in the thermoforming process through its combination of properties like ESCR, rigidity and thermoforming. Main characteristics: - Allows for downgauging - ESCR to food stuff and hydrocarbons - Ease of processing in extrusion and thermoforming - Excellent thermoforming behaviour - Increased rigidity Applications: - Large Appliance / Refrigeration liners - General extrusion / thermoforming applications requiring ESCR Complies with: - Europe REGULATION (EC) 10/2011 - FDA, 21 CFR 177.1640 - Consult the regulations for complete details.

STYRON A-TECH™ 1180 advanced technology polystyrene resin is a high-impact resin with a unique combination of high gloss, high heat, excellent stiffness and good practical toughness. It is designed for injection molding applications. Main Characteristics: - High gloss - High heat - High stiffness - Good practical toughness Applications: - Air-conditioner - Refrigerator accessories Complies with: - U.S. FDA 21 CFR 177.1640 - Consult the regulation for complete details.

STYRON A-TECH™ 1200 is a newly developed, high-impact polystyrene (HIPS) resin based on patented technology. The technology platform for STYRON A-Tech makes it possible to eliminate the typical trade-offs among the key properties for HIPS including toughness, gloss, stiffness and processability. Main Characteristics: - Unique combination of toughness and stiffness - Ease of processing - Excellent thermoforming behaviour - Good blendability with General Purpose Polystyrene (GPPS) - Allows for down-gauging Applications: - Form Fill Seal (FFS) - Pre-Forms (DFS) - Vending cups Complies with: - Europe REGULATION (EC) 10/2011 - U.S. FDA 21 CFR 177.1640 - Consult the regulations for complete details.

STYRON A-TECH™ 1210 is a newly developed high impact polystyrene (HIPS) resin based on patented technology, offering a unique combination of processability, stiffness, toughness, low gloss and surface smoothness. Main Characteristics: - Low gloss and smooth sheet surface - Ease of processing - Excellent thermoforming behaviour - Good blendability with GPPS Applications: - Form Fill Seal (FFS) dairy packaging - Medical device packaging - Signage sheet - Sheet applications requiring matt and smooth surface Complies with: - Europe Regulation (EC) 10/2011 - U.S. FDA 21 CFR 177.1640 - Consult the regulations for complete details.

STYRON A-TECH™ 1300 advanced technology polystyrene resin is a high impact polystyrene resin offering excellent toughness and strength with good processability. Main Characteristics: - Excellent toughness - High strength - Easy processing - Gas-assist molding - High heat Applications: - TV - Printers - Audio enclosures - Small appliances Complies with: - U.S. FDA 21 CFR 177.1640 - Consult the regulation for complete details.

STYRON X-TECH™ 2175 is an environmental stress crack resistant (ESCR) HIPS resin especially developed for thermoforming and extrusion, especially for the refrigeration industry, the production of inner liners for fridges and freezers. Based on patented Trinseo technology, this resin allows potentially 5 % down gauging of the average sheet extrusion thickness for thermoforming of the inner liners, through its unique combination of ESCR, rigidity and melt strength. Main Characteristics - Allows for downgauging - ESCR to food stuff and hydrocarbons - Ease of processing in extrusion and thermoforming - Excellent thermoforming behaviour - Increased rigidity Applications - Large appliances / refrigeration liners - General extrusion/thermoforming applications requiring ESCR Complies with - Europe Regulation (EC) 10/2011 - FDA, 21 CFR 177.1640 - Consult the regulations for complete details.

STYRON X-TECH™ 4660 is a modified general-purpose polystyrene developed for XPS insulation board production based on new and patented PS chemistry. In combination with the active ingredient in masterbatch XZ82347.00 this product will develop a unique molecular structure with leads to exceptional melt strength and will result in superior property balance in XPS insulation board and outstanding extrudability. Benefits: - Heat resistance - High toughness - Easy flow Applications: - Foam extrusion

STYRON™ 2678 MED is a general purpose polystyrene with high flow and good toughness, designed for injection molding applications. It is compliant with ISO 10993 (biological Evaluation of Medical Devices) and is suitable for use in approved medical applications. Applications: - Injection moulded medical applications (such as device enclosures, packaging items, etc.) - Thin-walled containers Complies with: - ISO 10993 - Europe EU-Directive 2002/72/EC by Europe REGULATION (EC) 10/2011 - U.S. FDA 21 CFR 177.1640 - Consult the regulations for complete details.

STYRON™ 2686 MED is a general purpose resin with medium flow and good toughness, designed for injection moulding and extrusion applications. It has been tested according to ISO 10993 (biological Evaluation of Medical Devices) and is suitable for use in approved medical applications. Applications: - Injection moulded applications - Thin wall containers Complies with: - Commission Regulation (EU) No 10/2011 and its amendments - U.S. FDA 21 CFR 177.1640 Consult the regulations for complete details.

STYRON™ 438 is a high-impact polystyrene resin with good flow, excellent stiffness, high heat and impact resistance. It is designed for injection molding applications. Main Characteristics: - High heat - Good balance of toughness and stiffness Complies with: - U.S. FDA 21 CFR 177.1640 - Consult the regulations for complete details. Applications: - Printers - Food containers - Household goods

STYRON™ 470 is a high-impact polystyrene resin with an excellent balance of toughness, stiffness, flow and heat resistance. It is suitable for both injection molding and extrusion applications. Main Characteristics: - Good practical toughness - Easy processing Complies with: - U.S. FDA 21 CFR 177.1640 - Consult the regulations for complete details. Applications: - Audio enslosures - Media enclosures - Toys - Food containers

STYRON™ 485 is an easy-flowing, high impact polystyrene, offering high impact strength coupled with good flexibility. Applications: - Packaging, diluted with general purpose polystyrene - Industrial articles Complies with: - Europe REGULATION (EC)10/2011 - U.S. FDA 21 CFR 177.1640 - Consult the regulations for complete details.

STYRON™ 486M is a high-impact polystyrene resin with an excellent balance of toughness, stiffness, flow and heat resistance. It is suitable for both injection molding and extrusion applications. Main Characteristics: - Good practical toughness - Easy processing Complied with: - U.S. FDA 21 CFR 177.1640 - Europe REGULATION (EC)10/2011 - Consult the regulation for complete details. Applications: - Audio enclosures - Small appliances - Media enclosures - Toys - Food containers

STYRON™ 634 is a general purpose polystyrene with an ideal combination of characteristics making it suitable for use on its own or in blends with impact polystyrene both for extrusion and injection molding. Applications: - Petri dishes - Household applications - Packaging applications Complies with: - Europe REGULATION (EC)10/2011 - U.S. FDA 21 CFR 177.1640 - Consult the regulations for complete details.

STYRON™ 636 BT is a general purpose polystyrene with a specific Blue Tone color designed for injection molded appliance applications. It is a high molecular weight material suitable for extrusion blending with high impact polystyrene. Its high strength makes it ideally suited for packaging applications and refrigerator accessories. Applications: - Injection molded appliance accessories and containers with a light blue tint - Packaging foam extrusion - Thermoformed containers blended with HIPS Complies with: - Europe REGULATION (EC)10/2011 - U.S. FDA 21 CFR 177.1640 - Consult the regulations for complete details.

STYRON™ 637 is a general purpose polystyrene designed for use in extrusion blending with impact polystyrene where its high strength can be used to maximum advantage. It is a high molecular weight material designed for extrusion blending. Its high strength makes it ideally suited for packaging applications. Applications: - Injection molded packages - Packaging foam extrusion - Injection molded containers Complies with: - Europe REGULATION (EC)10/2011 - U.S. FDA 21 CFR 177.1640 - Consult the regulations for complete details.

STYRON™ 641 is a high melt flow rate general purpose resin specifically developed for extruded polystyrene (XPS) foam applications. Main Characteristics - High melt flow rate - Excellent foamability Applications: - Foam boards

STYRON™ 650 HF is a high melt flow rate general purpose resin specifically developed for medium to thick XPS board applications. It offers a unique balance of melt tension, processability and foaming behavior. Its high MFR also makes it very suitable for high dosing compounding applications. Main Characteristics - Very high melt flow rate - Excellent foamability Applications: - Foam sheet - Masterbatch production

STYRON™ 656D is a general purpose polystyrene with easy flow and good clarity. It is reocmmended for applications where a specific balance of flow and strength are important. Applications: - Media enclosures - Disposable cups - Blending with HIPS Complies with: - U.S. FDA 21 CFR 177.1640 - Europe REGULATION (EC) 10/2011 - Consult the regulation for complete details.

STYRON™ 660 is a general-purpose polystyrene designed for both molding and extrusion applications. The balance between heat resistance, toughness and flow is exceptional. Applications: - Foam extrusion

STYRON™ 666H is a general purpose polystyrene with easy flow and good clarity. It is recommended for applications where a specific balance of flow and strength are important. Applications: - Media enclosures - Disposable cups - Blending with HIPS Complies with: - U.S. FDA 21 CFR 177.1640 - Consult the regulation for complete details.

STYRON™ 678E is a general purpose polystyrene with high flow and good toughness. It is designed for injection molding cap coating and for use either pure or in a mixture with other easy flowing high impact polymers in injection molding applications. Applications: - Thin-walled containers - Coextrusion cap coating Complies with: - Europe EU-Directive 2002/72/EC by Europe REGULATION (EC) 10/2011 - U.S. FDA 21 CFR 177.1640 - Consult the regulations for complete details.

STYRON™ 685D is a high heat resistance, high tensile strength and high stiffness, general purpose polystyrene. It is recommended for applications where tensile and melt strength as well as heat resistance properties are important. Characteristics - High heat Applications - Media enclosures - Refrigerator accessories - Oriented polystyrene sheets Complies with - U.S. FDA 21 CFR 177.1640 - Europe REGULATION (EC) 10/2011 - CAN. HPB NO OBJECTION (WITH LIMITATIONS) - CSA (Canada Standards Association) - Consult Regulations for details.

STYRON™ 685F is a general purpose polystyrene resin with high heat resistance, high stiffness and strength. It is recommended for both extrusion and injection molding applications. Main Characteristics: - High heat Applications: - Foam sheet - Household ware Complies with - U.S. FDA 21 CFR 177.1640 - Consult Regulations for details.

STYRON™ 686E is a general purpose polystyrene resin designed for both moulding and extrusion applications.The balance between heat resistance, toughness and flow is exceptional.It also has good dimensional stability and excellent clarity. Applications: - Foamed PS sheets used for packaging, e.g. egg trays - Thin-wall food packages - Medium and heavy section applications in the injection moulding field Complies with: - Europe REGULATION (EC) 10/2011 - U.S. FDA 21 CFR 177.1640 - Consult regulations for details.

STYRON™ CO2RE™ 1110BIO80 HIPS is credited with 80% of ISCC+ bio-based feedstocks through mass balance certification. STYRON™ CO2RE™ 1110 advanced technology polystyrene resin is a high-gloss, high-impact resin for injection molding applications. Main Characteristics: - Excellent toughness - High gloss Applications: - Small appliances - Toys - Printers - Remote controls Complies with: - U.S. FDA 21 CFR 177.1640 - Consult the regulation for complete details.

STYRON™ CO2RE™ 1173BIO85 HIPS is credited with 85% of ISCC+ bio-based feedstocks through mass balance certification. STYRON™ CO2RE™ 1173BIO85 advanced technology polystyrene resin is a high impact, environmental stress crack resistant (ESCR) resin for extrusion thermoforming applications. The improved rigidity of this resin allows potential down-gauging and scrap reduction, as well as overall improvements in process efficiency. Main Characteristics: - Easy processing - Outstanding thermoformability - Good practical toughness - ESCR performance Complies with: - U.S. FDA 21 CFR 177.1640 - Consult the regulation for complete details. Applications: - Large appliance/refrigerator liners - Other deep draw extrusion thermoforming applications

STYRON™ CO2RE™ 1175BIO85 HIPS is credited with 85% of ISCC+ bio-based feedstocks through mass balance certification. STYRON™ CO2RE™ 1175BIO85 advanced technology polystyrene is a high impact, environmental stress crack resistant (ESCR) resin, designed for extrusion and thermoforming applications, especially for the refrigeration industry. Based on patented technology, this resin allows for potential downgauging and scrap reduction in the thermoforming process through its combination of properties like ESCR, rigidity and thermoforming. Applications: - Large Appliance / Refrigeration liners - General extrusion / thermoforming applications requiring ESCR Complies with: - Europe REGULATION (EC) 10/2011 - FDA, 21 CFR 177.1640 - Consult the regulations for complete details.

STYRON™ CO2RE™ 1180BIO85 is credited with 85% of ISCC+ bio-based feedstocks through mass balance certification. STYRON™ CO2RE™ 1180BIO85 advanced technology polystyrene is a high-impact resin with a unique combination of high gloss, high heat, excellent stiffness and good practical toughness. It is designed for injection molding applications. Applications: - Air-conditioners - Refrigerator accessories Complies with: - U.S. FDA 21 CFR 177.1640 - Consult the regulation for complete details.

STYRON™ CO2RE™ 1300BIO85 HIPS is credited with 85% of ISCC+ bio-based feedstocks through mass balance certification. STYRON™ CO2RE™ 1300BIO85 advanced technology polystyrene is a high impact polystyrene resin offering excellent toughness and strength with good processability. Applications: - TV enclosures - Printers - Audio enclosures - Small appliances Complies with: - U.S. FDA 21 CFR 177.1640 - Consult the regulation for complete details.

STYRON™ CO2RE™ 438BIO85 HIPS is credited with 85% of ISCC+ bio-based feedstocks through mass balance certification. STYRON™ CO2RE™ 438BIO85 is a high-impact polystyrene resin with good flow, excellent stiffness, high heat and impact resistance. It is designed for injection molding applications. Main Characteristics: - High heat - Good balance of toughness and stiffness Complies with: - U.S. FDA 21 CFR 177.1640 - Consult the regulations for complete details. Applications: - Printers - Food containers - Household goods

STYRON™ CO2RE™ 470BIO85 HIPS is credited with 85% of ISCC+ bio-based feedstocks through mass balance certification.. STYRON™ CO2RE™ 470BIO85 is a high-impact polystyrene resin with an excellent balance of toughness, stiffness, flow and heat resistance. It is suitable for both injection molding and extrusion applications. Main Characteristics: - Good practical toughness - Easy processing Complies with: - U.S. FDA 21 CFR 177.1640 - Consult the regulations for complete details. Applications: - Audio enslosures - Media enclosures - Toys - Food containers

STYRON™ CO2RE™ 666HBIO95 GPPS is credited with 95% of ISCC+ bio-based feedstocks through mass balance certification. It is a general purpose polystyrene with easy flow and good clarity. It is recommended for applications where a specific balance of flow and strength is important. Applications: - Media enclosures - Disposable cups - Blending with HIPS Complies with: - U.S. FDA 21 CFR 177.1640 - Consult the regulation for complete details

STYRON™ CO2RE™ 676DI30 is a general purpose polystyrene containing 30% recycled polystyrene. It has a high flow and good toughness. It is designed for injection molding, cap coating and for use either pure or in a mixture with other easy flowing high impact polymers in injection molding applications. STYRON™ CO2RE™ 676DI30 GPPS has a lower carbon footprint than virgin polystyrene. Applications: - Thin-walled containers - Coextrusion cap coating

STYRON™ CO2RE™ 685DBIO95 GPPS is credited with 95% of ISCC+ bio-based feedstocks through mass balance certification. It is a general purpose polystyrene with high heat resistance, high tensile strength and high stiffness. It is recommended for applications where tensile and melt strength as well as heat resistance properties are required. Applications - Media enclosures - Refrigerator accessories - Oriented polystyrene sheets Complies with - U.S. FDA 21 CFR 177.1640 - Europe REGULATION (EC) 10/2011 - CAN. HPB NO OBJECTION (WITH LIMITATIONS) - CSA (Canada Standards Association) - Consult Regulations for details.

STYRON™ CO2RE™ 687DI30 is a general purpose polystyrene resin containing 30% recycled polystyrene. It is designed for both moulding and extrusion applications. The balance between heat resistance, toughness and flow is exceptional. It also has good dimensional stability and good clarity. STYRON™ CO2RE™ 687DI30 has a lower carbon footprint than virgin polystyrene. Applications: - Foamed PS sheets - Thin wall packages - Medium and heavy section applications in injection moulding

STYRON™ CO2RE™ 688DI30 is a general purpose polystyrene resin containing 30% recycled polystyrene. It is designed for both moulding and extrusion applications. The balance between heat resistance, toughness and flow is exceptional. It also has good dimensional stability STYRON™ CO2RE™ 688DI30 has a lower carbon footprint than virgin polystyrene. Applications: - Foamed PS sheets - Thin wall packages - Medium and heavy section applications in injection moulding

STYRON C-TECH™ is a specialty medium impact polystyrene resin that offers excellent gloss. Upon orientation it develops good transparency. Typical uses include blending with GPPS for the production of transparent thermoformed cups, impact modifier for the production of OPS sheet or gloss cap layer for coextruded sheet structures. Main Characteristics: - High clarity and good mechanical properties after orientation (e.g. thermoforming) - Excellent gloss - High heat resistance - High Flow - Easy processing Applications: - Transparent thermoformed food containers - Impact modifier for Oriented Polystyrene (OPS) sheet - Gloss cap layer for coextruded structures Complies with: - Europe Regulation (EC) 10/2011 - U.S. FDA 21 CFR 177.1640 - Consult the regulations for complete details.