Bayflex 110-35 IMR system produces a solid urethane elastomer which has a flexural modulus of approximately 33,500 psi* at room temperature. This system is used to provide multiple releases of large reaction injection molding (RIM) parts, such as automotive fascias. The system contains internal mold release (IMR) and is used with milled glass fiber or mineral reinforcements. Bayflex 110-35 IMR is a formulated RIM system supplied as two liquid components. Component A is a diphenylmethane diisocyanate (MDI) prepolymer, and Component B is a polyether polyol system. As with any product, use of the Bayflex 110-35 IMR system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Bayflex 110-35 IMR system produces a solid urethane elastomer which has a flexural modulus of approximately 33,500 psi* at room temperature. This system is used to provide multiple releases of large reaction injection molding (RIM) parts, such as automotive fascias. The system contains internal mold release (IMR) and is used with milled glass fiber or mineral reinforcements. Bayflex 110-35 IMR is a formulated RIM system supplied as two liquid components. Component A is a diphenylmethane diisocyanate (MDI) prepolymer, and Component B is a polyether polyol system. As with any product, use of the Bayflex 110-35 IMR system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Bayflex 110-35 IMR system produces a solid urethane elastomer which has a flexural modulus of approximately 33,500 psi* at room temperature. This system is used to provide multiple releases of large reaction injection molding (RIM) parts, such as automotive fascias. The system contains internal mold release (IMR) and is used with milled glass fiber or mineral reinforcements. Bayflex 110-35 IMR is a formulated RIM system supplied as two liquid components. Component A is a diphenylmethane diisocyanate (MDI) prepolymer, and Component B is a polyether polyol system. As with any product, use of the Bayflex 110-35 IMR system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Bayflex 110-35 IMR system produces a solid urethane elastomer which has a flexural modulus of approximately 33,500 psi* at room temperature. This system is used to provide multiple releases of large reaction injection molding (RIM) parts, such as automotive fascias. The system contains internal mold release (IMR) and is used with milled glass fiber or mineral reinforcements. Bayflex 110-35 IMR is a formulated RIM system supplied as two liquid components. Component A is a diphenylmethane diisocyanate (MDI) prepolymer, and Component B is a polyether polyol system. As with any product, use of the Bayflex 110-35 IMR system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Bayflex 110-35 system produces a solid urethane elastomer which has a flexural modulus of approximately 33,500 psi at room temperature. This system is used to produce large reaction injection molding (RIM) parts, such as automotive fascias. The system combines rapid demold times, excellent integrity at demold, and outstanding physical properties. Bayflex 110-35 is a formulated RIM system supplied as two liquid components. Component A is a diphenylmethane diisocyanate (MDI) prepolymer, and Component B is a polyether polyol system. As with any product, use of the Bayflex 110-35 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

The Bayflex 110-50 system produces a solid urethane elastomer which has a flexural modulus of approximately 50,000 psi* at room temperature. This system can be used with or without milled glass fiber or mineral reinforcements. The Bayflex 110-50 system is used in applications requiring excellent impact properties such as automotive fascias, agricultural and construction equipment, specialty vehicles and recreational equipment. The Bayflex 110-50 system is a formulated elastomeric reaction injection molding (RIM) system supplied as two liquid components. Component A is a diphenylmethane diisocyanate (MDI) prepolymer, and Component B is a polyether polyol system. As with any product, use of the Bayflex 110-50 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

The Bayflex 110-50 system produces a solid urethane elastomer which has a flexural modulus of approximately 50,000 psi* at room temperature. This system can be used with or without milled glass fiber or mineral reinforcements. The Bayflex 110-50 system is used in applications requiring excellent impact properties such as automotive fascias, agricultural and construction equipment, specialty vehicles and recreational equipment. The Bayflex 110-50 system is a formulated elastomeric reaction injection molding (RIM) system supplied as two liquid components. Component A is a diphenylmethane diisocyanate (MDI) prepolymer, and Component B is a polyether polyol system. As with any product, use of the Bayflex 110-50 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

The Bayflex 110-50 system produces a solid urethane elastomer which has a flexural modulus of approximately 50,000 psi* at room temperature. This system can be used with or without milled glass fiber or mineral reinforcements. The Bayflex 110-50 system is used in applications requiring excellent impact properties such as automotive fascias, agricultural and construction equipment, specialty vehicles and recreational equipment. The Bayflex 110-50 system is a formulated elastomeric reaction injection molding (RIM) system supplied as two liquid components. Component A is a diphenylmethane diisocyanate (MDI) prepolymer, and Component B is a polyether polyol system. As with any product, use of the Bayflex 110-50 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

The Bayflex 110-50 system produces a solid urethane elastomer which has a flexural modulus of approximately 50,000 psi* at room temperature. This system can be used with or without milled glass fiber or mineral reinforcements. The Bayflex 110-50 system is used in applications requiring excellent impact properties such as automotive fascias, agricultural and construction equipment, specialty vehicles and recreational equipment. The Bayflex 110-50 system is a formulated elastomeric reaction injection molding (RIM) system supplied as two liquid components. Component A is a diphenylmethane diisocyanate (MDI) prepolymer, and Component B is a polyether polyol system. As with any product, use of the Bayflex 110-50 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

The Bayflex 110-50 system produces a solid urethane elastomer which has a flexural modulus of approximately 50,000 psi* at room temperature. This system can be used with or without milled glass fiber or mineral reinforcements. The Bayflex 110-50 system is used in applications requiring excellent impact properties such as automotive fascias, agricultural and construction equipment, specialty vehicles and recreational equipment. The Bayflex 110-50 system is a formulated elastomeric reaction injection molding (RIM) system supplied as two liquid components. Component A is a diphenylmethane diisocyanate (MDI) prepolymer, and Component B is a polyether polyol system. As with any product, use of the Bayflex 110-50 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

The Bayflex 110-80 system produces a solid urethane elastomer which has a flexural modulus of approximately 80,000 psi at room temperature. This system can be used with or without milled glass fiber or mineral reinforcements. It combines rapid demold times, excellent integrity at demold, improved release characteristics, and outstanding physical properties, especially heat sag characteristics. The Bayflex 110-80 system is a formulated elastomeric reaction injection molding (RIM) system supplied as two liquid components. Component A is a diphenylmethane diisocyanate (MDI) prepolymer, and Component B is a polyether polyol system. As with any product, use of the Bayflex 110-80 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

The Bayflex 110-80 system produces a solid urethane elastomer which has a flexural modulus of approximately 80,000 psi at room temperature. This system can be used with or without milled glass fiber or mineral reinforcements. It combines rapid demold times, excellent integrity at demold, improved release characteristics, and outstanding physical properties, especially heat sag characteristics. The Bayflex 110-80 system is a formulated elastomeric reaction injection molding (RIM) system supplied as two liquid components. Component A is a diphenylmethane diisocyanate (MDI) prepolymer, and Component B is a polyether polyol system. As with any product, use of the Bayflex 110-80 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Bayflex 120-50 is a polyurea RIM system designed to provide increased productivity compared to the typical amine-extended urethane systems. Bayflex 120-50 polyurea is recommended for applications such as automotive fascia, side moldings, exterior trim panels, wheel well flares, etc. Faster cure time, less frequent application of external mold release agent, and reduced mold cleaning are possible, providing increased productivity. (A 40% increase in parts per shift has been observed in test applications.) The Bayflex 120-50 polyurea system also provides a superior property profile compared to amine-extended urethane systems, with better dimensional stability and part appearance. Reinforcements, such as milled glass fibers, wollastonite, and Covestro's proprietary DOI filler can be used for further improvement in overall dimensional stability. As with any product, use of the Bayflex 120-50 polyurea system in a given application must be tested (including field testing, etc.) in advance bythe user to determine suitability. Bayflex 120-50 is a formulated reaction injection molding system (RIM) supplied as two liquid components. Component A is a diphenylmethane diisocyanate (MDI) prepolymer and Component B is a polyether amine.

Bayflex 180 is a high-performance polymer system with excellent heat stability, low moisture absorption, low thermal expansion characteristics and excellent impact resistance. Parts made from this material have excellent surface and paint adhesion qualities and have a DOI (Distinction of Image) comparable to painted steel parts. A wide range of parts can be molded with the Bayflex 180 system, from thin wallstock rocker panels and trim to large, durable body panels and engine enclosures for specialty equipment. As with any product, use of the Bayflex 180 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability. The Bayflex 180 system is supplied as two reactive liquid components. Component A is a diphenylmethane diisocyanate (MDI) prepolymer and Component B is a polyether polyol.

Bayflex 180 is a high-performance polymer system with excellent heat stability, low moisture absorption, low thermal expansion characteristics and excellent impact resistance. Parts made from this material have excellent surface and paint adhesion qualities and have a DOI (Distinction of Image) comparable to painted steel parts. A wide range of parts can be molded with the Bayflex 180 system, from thin wallstock rocker panels and trim to large, durable body panels and engine enclosures for specialty equipment. As with any product, use of the Bayflex 180 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability. The Bayflex 180 system is supplied as two reactive liquid components. Component A is a diphenylmethane diisocyanate (MDI) prepolymer and Component B is a polyether polyol.

Bayflex 180 is a high-performance polymer system with excellent heat stability, low moisture absorption, low thermal expansion characteristics and excellent impact resistance. Parts made from this material have excellent surface and paint adhesion qualities and have a DOI (Distinction of Image) comparable to painted steel parts. A wide range of parts can be molded with the Bayflex 180 system, from thin wallstock rocker panels and trim to large, durable body panels and engine enclosures for specialty equipment. As with any product, use of the Bayflex 180 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability. The Bayflex 180 system is supplied as two reactive liquid components. Component A is a diphenylmethane diisocyanate (MDI) prepolymer and Component B is a polyether polyol.

Bayflex 190 is an ELPO (electrophoresis-capable) high-performance polyurea with excellent heat stability, low moisture absorption, low thermal expansion characteristics, and excellent impact resistance. Parts made from this material have superior surface and paint adhesion qualities and have a DOI (Distinction of Image) comparable to painted steel parts. The Bayflex 190 system is an excellent choice for applications such as truck fenders and tailgates. As with any product, use of the Bayflex 190 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability. Bayflex 190 is a formulated RIM system, supplied as two liquid components. Component A is a diphenylmethane diisocyanate (MDI) prepolymer and Component B is a polyether amine system.

Bayflex 190 is an ELPO (electrophoresis-capable) high-performance polyurea with excellent heat stability, low moisture absorption, low thermal expansion characteristics, and excellent impact resistance. Parts made from this material have superior surface and paint adhesion qualities and have a DOI (Distinction of Image) comparable to painted steel parts. The Bayflex 190 system is an excellent choice for applications such as truck fenders and tailgates. As with any product, use of the Bayflex 190 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability. Bayflex 190 is a formulated RIM system, supplied as two liquid components. Component A is a diphenylmethane diisocyanate (MDI) prepolymer and Component B is a polyether amine system.

Bayflex 5510 is a water-blown polyurethane semi-flexible foam system designed as back-fill support for vinyl extrusion, especially window lineals. This system is capable of filling 16-foot long extrusions, including cavities with small cross sections. As with any product, use of Bayflex 5110 system in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability for use.

Bayflex 953 is a fully compounded polyether-based polyurethane system consisting of two liquid components which can be water-blown. Component A is a modified diphenylmethane diisocyanate (MDI) prepolymer, and Component B is a polyether polyol system. The Bayflex 953 system is used in the manufacture of microcellular polyurethane shoe soles. Soles prepared from these components combine light weight, comfort, and durability. Processibility and dynamic flexural properties are excellent over a wide range of densities. The combination of excellent physical properties and ease of processing has made the Bayflex 953 system a prime material for single-density soles for fashion and casual shoes. As with any product, use of the Bayflex 953 system in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.

Bayflex 954 is a fully compounded polyether-based polyurethane system consisting of two liquid components which can be water-blown. Component A is a modified diphenylmethane diisocyanate (MDI) prepolymer, and Component B is a polyether polyol system. The Bayflex 954 system is used in the manufacture of microcellular polyurethane shoe soles. Soles prepared from these components combine light weight, comfort, and durability. Processibility and dynamic flexural properties are excellent over a wide range of densities. The combination of excellent physical properties and ease of processing has made the Bayflex 954 system a prime soling material for fashion and casual shoes. As with any product, use of the Bayflex 954 system in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. The properties of the Bayflex 954 system, listed below, are representative of typical performance characteristics of molded panels. Actual results may vary, depending on part design and processing conditions.

Bayflex 957 is a fully compounded polyether-based polyurethane system consisting of two liquid components which can be water-blown. Component A is a modified diphenylmethane diisocyanate (MDI) prepolymer, and Component B is a polyether polyol system. The Bayflex 957 system is used in the manufacture of microcellular polyurethane shoe soles. Soles prepared from these components combine light weight, comfort, and durability. Processibility and dynamic flexural properties are excellent over a wide range of densities. The combination of excellent physical properties and ease of processing has made the Bayflex 957 system a prime soling material for fashion and casual shoes. As with any product, use of the Bayflex 957 system in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. The properties of the Bayflex 957 system, listed below, are representative of typical performance characteristics of molded panels. Actual results may vary, depending on part design and processing conditions.

Bayflex 963 is a fully compounded polyether-based polyurethane system consisting of two liquid components which can be water-blown. Component A is a modified diphenylmethane diisocyanate (MDI) prepolymer, and Component B is a polyether polyol system. The Bayflex 963 system is used in the manufacture of microcellular polyurethane innersoles. The innersoles prepared from these compounds combine light weight, comfort, and durability. Processibility and dynamic flexural properties are excellent and have made the Bayflex 963 system a prime innersole material. As with any product, use of the Bayflex 963 system in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. The properties of the Bayflex 963 system, listed below, are representative of typical performance characteristics of molded panels. Actual results may vary, depending on part design and processing conditions.

Bayflex LSR 10 is a solid elastomer which has a flexural modulus of 17,500 psi at room temperature. It is processed on reaction injection molding (RIM) equipment and is used for glass encapsulation of windows. This system combines rapid demold times, excellent integrity at demold, and outstanding physical properties. The Bayflex LSR 10 system was developed to add a weather-resistant grade to our range of window encapsulation systems. In some cases, the weatherability of this system eliminates the need for post-painting or in-mold coatings. This product is available only in black. Bayflex LSR 10 is a formulated RIM system supplied as two reactive liquid components. Component A is a diphenylmethane diisocyanate (MDI) prepolymer, and component B is a polyether polyol. As with any product, use of the Bayflex LSR 10 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Bayflex MP-10,000 IMR is a solid elastomer which has a flexural modulus of approximately 10,000 psi (69 MPa) at room temperature. It is processed on reaction injection molding (RIM) equipment and is used for rollers, gaskets, and encapsulated windows. This system combines rapid demold times, excellent integrity at demold, improved release characteristics, and outstanding physical properties. This system also offers the advantage of an internal mold release (IMR). It is formulated to provide excellent releasability during production of RIM encapsulated windows while still maintaining strong adhesion to primed glass. Compatibility between MP-10,000 IMR and current industrial in-mold coatings is equivalent to standard Bayflex MP systems. The incorporation of internal mold release technology into RIM modular window production reduces the frequency of external mold release application. This can increase productivity by decreasing cycle time and reducing the frequency of mold cleaning. As with any product, use of the Bayflex MP-10,000 IMR system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Bayflex MP-25,000 is a solid elastomer which has a flexural modulus of 25,000 psi (172 MPa) at room temperature.* It is processed on reaction injection molding (RIM) equipment and is used for rollers, gaskets, and encapsulated windows. This system combines rapid demold times, excellent integrity at demold, improved release characteristics and outstanding physical properties. As with any product, use of the Bayflex MP-25,000 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability. Bayflex MP-25,000 is a formulated RIM system supplied as two liquid components. Component A is a diphenylmethane diisocyanate (MDI) prepolymer, and Component B is a polyether polyol. Note: Component B should be agitated thoroughly prior to transfer of contents from the drum to the day tank.

Bayflex MP-5,000 is a solid elastomer which has a flexural modulus of 5,000 psi (35 MPa) at room temperature.* It is processed on reaction injection molding (RIM) equipment and is used for rollers, gaskets, and encapsulated windows. This system combines rapid demold times, excellent integrity at demold, improved release characteristics and outstanding physical properties. As with any product, use of the Bayflex MP-5,000 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability. Bayflex MP-5,000 is a formulated RIM system supplied as two liquid components. Component A is a diphenylmethane diisocyanate (MDI) prepolymer, and Component B is a polyether polyol. Note: Component B should be agitated thoroughly prior to transfer of contents from the drum to the day tank.

Bayflex WR-20 is a solid elastomer which has a flexural modulus of 3,000 psi (21 MPa) at room temperature. It is processed on reaction injection molding (RIM) equipment and is used for rollers, gaskets, and encapsulated windows. This system combines rapid demold times, excellent integrity at demold, improved release characteristics, and outstanding physical properties.The Bayflex WR-20 system was developed to add a weather-resistant grade to our range of window encapsulation systems. In some cases, the weatherability of this system eliminates the need for post-painting or in-mold coatings. This product is available only in black. Bayflex WR-20 is a formulated RIM system supplied as two reactive liquid components. Component A is a diphenylmethane diisocyanate (MDI) prepolymer, and Component B is a polyether polyol. As with any product, use of the Bayflex WR-20 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Bayflex XGT-100 is an elastomeric polyurethane system used in the reaction injection molding (RIM) process. The system is supplied as two liquid components: Component A is a modified diphenylmethane diisocyanate (MDI), and Component B is a polyether polyol system. The extended gel time of Bayflex XGT-100 system gives equipment designers the flexibility to create large, complex parts that can be molded on existing injection machinery. The resin 's excellent surface quality and high impact resistance make it a candidate for agricultural equipment, heavy-duty trucks, specialty transportation, and marine applications. As with any product, use of the Bayflex XGT-100 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Bayflex XGT-100 is an elastomeric polyurethane system used in the reaction injection molding (RIM) process. The system is supplied as two liquid components: Component A is a modified diphenylmethane diisocyanate (MDI), and Component B is a polyether polyol system. The extended gel time of Bayflex XGT-100 system gives equipment designers the flexibility to create large, complex parts that can be molded on existing injection machinery. The resin 's excellent surface quality and high impact resistance make it a candidate for agricultural equipment, heavy-duty trucks, specialty transportation, and marine applications. As with any product, use of the Bayflex XGT-100 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Bayflex XGT-140 is an elastomeric polyurethane system used in the reaction injection molding (RIM) process. The system is supplied as two liquid components: Component A is a modified diphenylmethane diisocyanate (MDI), and Component B is a polyether polyol system. The extended gel time of Bayflex XGT-140 system gives equipment designers the flexibility to create large, complex parts that can be molded on existing injection machinery. The resin 's excellent surface quality and high impact resistance make it a candidate for agricultural equipment, heavy-duty trucks, specialty transportation, and marine applications. As with any product, use of the Bayflex XGT-140 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Bayflex XGT-15 is an elastomeric polyurethane system used in the reaction injection molding (RIM) process. The formulated system is supplied as two liquid components: Component A is a diphenylmethane diisocyanate (MDI) prepolymer, and Component B is a polyether polyol system. Bayflex XGT-15 system has a flexural modulus of 16,00 psi at room temperature. It is used in applications requiring long shot times allowing large parts to be made on smaller equipment. The Bayflex XGT-15 system is suitable for use in glass encapsulation applications, or in applications requiring excellent impact properties, such as bus and truck bumpers or equipment housings. As with any product, use of the Bayflex XGT-15 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Bayflex XGT-16 Black is a black-pigmented elastomeric polyurethane system used in the reaction injection molding (RIM) process. The formulated system is supplied as two liquid components: Component A is a diphenylmethane diisocyanate (MDI) prepolymer, and Component B is a polyether polyol system. Note: The polyol component phase-separates upon standing and must be thoroughly mixed via mechanical means prior to use. Bayflex XGT-16 Black system has a flexural modulus of 16,000 psi* at room temperature. It is used in applications requiring excellent impact properties, such as bumpers for buses and other vehicles. As with any product, use of the Bayflex XGT-16 Black system in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.

Bayflex XGT-16 Clear is an elastomeric polyurethane system used in the reaction injection molding (RIM) process. The formulated system is supplied as two liquid components: Component A is a diphenylmethane diisocyanate (MDI) prepolymer, and Component B is a polyether polyol system. Bayflex XGT-16 Clear system has a flexural modulus of 16,00 psi at room temperature. It is used in applications requiring excellent impact properties, such as bumpers for buses and other vehicles. As with any product, use of the Bayflex XGT-16 Clear system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Bayflex XGT 2 is an elastomeric polyurethane system used in the reaction injection molding (RIM) process. The system is supplied as two liquid components: Component A is a modified diphenylmethane diisocyanate (MDI), and Component B is a polyether polyol system. The extended gel time of Bayflex XGT 2 gives equipment designers the flexibility to create large, complex parts that can be molded on existing injection machinery. The resin's soft feel and the ability to tailor part density through the addition of barium sulfate make this product ideal for applications that require some level of sound absorption, such as floor coverings in heavy trucks or equipment. In addition, the material is soft enough to be used for producing seals, gaskets and wire harness type applications. As with any product, use of the Bayflex XGT 2 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Bayflex XGT 2 is an elastomeric polyurethane system used in the reaction injection molding (RIM) process. The system is supplied as two liquid components: Component A is a modified diphenylmethane diisocyanate (MDI), and Component B is a polyether polyol system. The extended gel time of Bayflex XGT 2 gives equipment designers the flexibility to create large, complex parts that can be molded on existing injection machinery. The resin's soft feel and the ability to tailor part density through the addition of barium sulfate make this product ideal for applications that require some level of sound absorption, such as floor coverings in heavy trucks or equipment. In addition, the material is soft enough to be used for producing seals, gaskets and wire harness type applications. As with any product, use of the Bayflex XGT 2 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Bayflex XGT-2DP is an elastomeric polyurethane system used in the reaction injection molding (RIM) process. Bayflex XGT-2DP is an elastomeric polyurethane system used in the reaction injection molding (RIM) process. The system is supplied as two liquid components: Component A is a modified diphenylmethane diisocyanate (MDI), and Component B is a polyether polyol system. The extended gel time of Bayflex XGT-2DP gives equipment designers the flexibility to create large, complex parts that can be molded on existing injection machinery. The resin 's soft feel and the ability to tailor part density through the addition of barium sulfate make this product ideal for applications that require some level of sound absorption, such as floor coverings in heavy trucks or equipment. In addition, the material is soft enough to be used for producing seals, gaskets and wire harness type applications. As with any product, use of the Bayflex XGT-2DP system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Bayflex XGT-2DP is an elastomeric polyurethane system used in the reaction injection molding (RIM) process. Bayflex XGT-2DP is an elastomeric polyurethane system used in the reaction injection molding (RIM) process. The system is supplied as two liquid components: Component A is a modified diphenylmethane diisocyanate (MDI), and Component B is a polyether polyol system. The extended gel time of Bayflex XGT-2DP gives equipment designers the flexibility to create large, complex parts that can be molded on existing injection machinery. The resin 's soft feel and the ability to tailor part density through the addition of barium sulfate make this product ideal for applications that require some level of sound absorption, such as floor coverings in heavy trucks or equipment. In addition, the material is soft enough to be used for producing seals, gaskets and wire harness type applications. As with any product, use of the Bayflex XGT-2DP system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Bayflex XGT 4 is an elastomeric polyurethane system used in the reaction injection molding (RIM) process. The system is supplied as two liquid components: Component A is a modified diphenylmethane diisocyanate (MDI), and Component B is a polyether polyol system. Note: The polyol component phase-separates upon standing and must be thoroughly mixed via mechanical means prior to use. The extended gel time of Bayflex XGT 4 gives equipment designers the flexibility to create large, complex parts that can be molded on existing injection machinery. The resin's excellent surface quality and high impact resistance make it a candidate for agricultural equipment, heavy-duty trucks, specialty transportation, and marine applications. As with any product, use of Bayflex XGT 4 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Bayflex XGT-50 Black is a black-pigmented elastomeric polyurethane system used in the reaction injection molding (RIM) process. The formulated system is supplied as two liquid components: Component A is a diphenylmethane diisocyanate (MDI) prepolymer ,and Component B is a polyether polyol system. Note: The polyol component phase separates upon standing and must be thoroughly mixed via mechanical means prior to use. Bayflex XGT-50 Black system has a flexural modulus of 50,000 psi* at room temperature. It is used in applications requiring excellent impact properties, such as bumpers for buses and other vehicles. As with any product, use of Bayflex XGT-50 Black system in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.