Solvent and filler free transparent two-component casting resin based on polyurethane. The resin is light stable and has good tear propagation strength. It provides a low tack and a good gloss. Is non-yellowing even under UV exposure. The two components are immediately compatible. The system does not contain mercury catalysts. Temperature range of use: -40°C to +120°C. The casting resin is used with WEVONAT 360. Applications: Encapsulation of electrical components for low and medium voltage applications like diodes and coatings.

Two-component encapsulating system based on polyurethane. The resin component is formulated with a mineral filler which provides self-extinguishing properties without use of halogen compounds. The resin does not contain halogenated flame-retardants, heavy metals or chlorofluorocarbons. The system is tested by Underwriters Labotatories under the File-No. E108835 at a thickness of 6 mm in black colour according to UL94V-0. The cured polymer exhibits tough-elastic properties as well as outstanding adhesion to most plastic materials and excellent behavior in thermal cycle tests. Temperature range of use: -40°C to +130°C. The casting resin is used with WEVONAT 300 HL Applications: Encapsulation of electrical components for low and medium voltage applications.

Casting resin system based on polyurethane, consisting of resin and hardener. After curing the material has an excellent flexibility and a very good adhesion on metals and plastics. This material was developed according to the requirements of ISO 291. Can be cured under water without any bubbles. Temperature range of use: -50°C to +120°C. The casting resin is used with WEVONAT 300 M

Two-component unfilled encapsulating system based on polyurethane. The resin component is formulated with a low abrasive mineral filler. The material is approved and listed under the File No. E108835 and achieves UL 94 HB properties at a thickness of 6,0 mm. Temperature range of use: -30°C to +130°C. The casting resin is used with WEVONAT 500 Applications: Encapsulation of electrical components for low and medium voltage applications.

Two-component encapsulating system based on polyurethane. The resin component is formulated with a mineral filler which provides self-extinguishing properties. The material achieves UL 94 V-2 properties at a thickness of 1,5 mm and is approved and listed under the File No. E108835 in colours black, grey and brown. The resin contains no halogenated flame-retardants, no heavy metals or chlorofluorocarbons. Temperature range of use: -40°C to +130°C . The casting resin is used with WEVONAT 300 Applications: Encapsulation of electrical components for low and medium voltage applications.

Two-component encapsulating system based on polyurethane. The polymerized system has self-extinguish properties and is tested by Underwriters Labotatories under the File-No. E108835 at a thickness of 1,5 mm according to UL 94 V-0. HWI, HAI and CTI-tests are passed with PLC 0, RTI value is 155°C (electrical strength). This product has the all colour recognition. The resin contains no halogenated flame-retardants, no heavy metals or chlorofluorocarbons. After curing the resin has an excellent flexibility at low temperatures and thermal endurance as well as an outstanding behavior in thermal shock tests. Temperature range of use: -50°C to +165°C. The casting resin is used with WEVONAT 300 RE Applications: Encapsulation of applications that require high thermal resistance and endurance, like coils, sensors or PCBs. Especially for automotive or ex-proof applications.

Two-component encapsulating system based on polyurethane. The resin component is formulated with a nonabrasive mineral filler which provides high thermal conductivity. After curing the resin has an excellent flexibility at low temperatures and thermal endurance as well as an outstanding behavior in thermal shock tests. Temperature range of use: -50°C to +165°C. The casting resin is used with WEVONAT 300 Applications: Encapsulation of applications that require high thermal resistance and endurance, like coils, sensors or PCBs. Especially for automotive or ex-proof applications.

Solvent and filler free transparent two-component casting resin based on polyurethane. The resin is light stable and has good tear propagation strength. Is non-yellowing even under UV exposure. The two components are immediately compatible. The system does not contain mercury catalysts. The system is tested by Underwriters Laboratories under the File-No. E108835 at a thickness of 2 mm according to UL HB. Temperature range of use: -40°C to +120°C. The casting resin is used with WEVONAT 356. Applications: Encapsulation of electrical components for low and medium voltage applications like diodes and coatings.

Two-component encapsulating system based on polyurethane. The resin component is formulated with a non-abrasive mineral filler. The system exhibits tough-elastic properties. The resin is silicon-free. Temperature range of use: -40°C to +120°C. The casting resin is used with WEVONAT 300 Applications: Encapsulation of electrical components for low and medium voltage applications.

Two-component encapsulating system based on polyurethane. The polymerized system has self-extinguish properties. The resin contains no halogenated flame-retardants. After curing the material has an excellent flexibility and therefore applies especially in case of encapsulation of pressure sen-sitive ferrites and SMD components. The material exhibits properties according to UL 94 V-0 at a thickness of 4 mm. The system is tested by Underwriters Labotatories under the File-No. E108835. HWI and HAI tests are passed with PLC 0, the RTI value is 130°C (mechanical and electrical strenght). Temperature range of use: -40°C to +130°C. The casting resin is used with WEVONAT 900. Applications: Encapsulation of electrical components like coils, sensors, capacitors or PCBs.

Two-component encapsulating system based on polyurethane. The polymerized system has self-extinguishing properties. The resin contains no halogenated flame-retardants. After curing the material has an excellent flexibility therefore it can be applied es-pecially in case of encapsulation of pressure sensitive ferrites and SMD components. The system is tested by Underwriters Laboratories under the File-No. E108835 at a thickness of 6 mm according to UL 94 V-0. According to DIN EN 45545-2: 2013-08, protection requirement R 22 the material meets hazard level HL 2, and according to protection requirement set R 23 it meets HL 3. Temperature range of use: -40°C to +130°C. The casting resin is used with WEVONAT 900 E. Applications: Encapsulation, sealing or coating of electrical components for low and medium voltage applications like sensors, switches or PCBs.

Two-component encapsulating system based on polyurethane. The resin component contains a mineral filler providing the material with self-extinguish properties. The resin contains no halogenated flame-retardants and is tough elastic. The system is tested by Underwriters Labotatories under the File-No. E108835 at a thickness of 1,5 mm according to UL 94 V-0. HWI, HAI and CTI-tests are passed with PLC 0, the RTI value is 130°C (mechanical and electrical strenght). This product has the all colour recognition. Temperature range of use: -40°C to +130°C. The casting resin is used with WEVONAT 300 Applications: Encapsulation, sealing or coating of electrical components for low and medium voltage applications like sensors, switches or PCBs.

Two-component encapsulating system based on polyurethane. The resin component contains a mineral filler providing the material with self-extinguish properties. The resin contains no halogenated flame-retardants and is tough elastic. The system is tested by Underwriters Labotatories under the File-No. E108835 at a thickness of 1,5 mm according to UL 94 V-0. HWI, HAI and CTI-tests are passed with PLC 0, the RTI value is 130°C (mechanical and electrical strenght). This product has the all colour recognition. Temperature range of use: -40°C to +130°C. The casting resin is used with WEVONAT 700 Applications: Encapsulation, sealing or coating of electrical components for low and medium voltage applications like sensors, switches or PCBs.

Two-component encapsulating system based on polyurethane. The resin component contains a mineral filler providing the material with self-extinguish properties. The resin contains no halogenated flame-retardants and is tough elastic. The system is tested by Underwriters Labotatories under the File-No. E108835 at a thickness of 1,5 mm according to UL 94 V-0. HWI, HAI and CTI-tests are passed with PLC 0, the RTI value is 130°C (mechanical and electrical strenght). This product has the all colour recognition. Temperature range of use: -40°C to +130°C. The casting resin is used with WEVONAT 300 Applications: Encapsulation, sealing or coating of electrical components for low and medium voltage applications like sensors, switches or PCBs.

Two-component encapsulating system based on polyurethane. The resin component contains a mineral filler providing the material with self-extinguish properties. The resin contains no halogenated flame-retardants and is tough elastic. The system is tested by Underwriters Laboratories under the File-No. E108835 at a thickness of 3 mm according to UL 94 V-0 Temperature range of use: -40°C to +130°C. The casting resin is used with WEVONAT 300 Applications: Encapsulation, sealing or coating of electrical components for low and medium voltage applications like sensors, switches or PCBs.

Two-component encapsulating system based on polyurethane. The resin component contains a mineral filler providing the material with self-extinguish properties. The resin contains no halogenated flame-retardants and is tough elastic. Temperature range of use: -40°C to +130°C. The casting resin is used with WEVONAT 300 Applications: Encapsulation, sealing or coating of electrical components for low and medium voltage applications like sensors, switches or PCBs.

Two-component encapsulating system based on polyurethane. The resin component contains a mineral filler providing the material with self-extinguish properties. The resin contains no halogenated flame-retardants and is tough elastic. The system is tested by Underwriters Labotatories under the File-No. E108835 at a thickness of 1,5 mm according to UL 94 V-0. HWI, HAI and CTI-tests are passed with PLC 0, the RTI value is 130°C (mechanical and electrical strenght). This product has the all colour recognition. Temperature range of use: -40°C to +130°C. The casting resin is used with WEVONAT 300 Applications: Encapsulation, sealing or coating of electrical components for low and medium voltage applications like sensors, switches or PCBs.

Two-component encapsulating system based on polyurethane. The resin component contains a mineral filler providing the material with self-extinguish properties. The resin contains no halogenated flame-retardants and is tough elastic. Temperature range of use: -40°C to +130°C. The casting resin is used with WEVONAT 300 RE Applications: Encapsulation, sealing or coating of electrical components for low and medium voltage applications like sensors, switches or PCBs.

Two-component encapsulating system based on polyurethane with high thermal conductivity. The polymerized system has self-extinguish properties. The resin contains no halogenated flame retardants,no heavy metals or chlorofluorocarbons. After curing the resin has an excelent flexibility at low temperatures and thermal endurance as well as an outstanding behaviour in thermal shock tests. The material exhibits properties according to UL 94 V-0 at a thickness of 1,6 mm. Temperature range of use: -50°C to +165°C. The casting resin is used with WEVONAT 300 RE. Applications: Encapsulation of applications that require high thermal resistance and endurance, like coils, sensors or PCBs. Especially for automotive or ex-proof applications.

Two-component encapsulating system based on polyurethane with high thermal conductivity. The resin component is formulated with a mineral filler which provides self-extinguishing properties without use of halogen compounds. The resin does not contain halogenated flame-retardants, heavy metals or chlorofluorocarbons. The material exhibits properties according to UL 94 V-0 at a thickness of 6 mm. The cured polymer exhibits tough-elastic properties as well as outstanding adhesion to most plastic materials, metals and glass and excellent behavior in thermal cycle tests. Temperature range of use: -40°C to +135°C. The casting resin is used with WEVONAT 900 Applications: Encapsulation of applications that require high thermal resistance and endurance, like coils, sensors or PCBs

Two-component encapsulating system based on polyurethane. The polymerized system has self-extinguish properties. The resin contains no halogenated flame-retardants. A fter curing the material has an excelent flexibility and therefore applies especially in case of encapsulation of pressure sensitive ferrites and SMD components. Temperature range of use: -40°C to +130°C. The casting resin is used with WEVONAT 900 Applications: Encapsulation of electrical components like coils, sensors, capacitors or PCBs.

Medium viscous, solventless two-component polyurethane adhesive with high thermal conductivity. The adhesive component contains abrasive filler. Temperature range of use: -40°C to +135°C. The casting resin is used with WEVONAT 801. Applications: Glueing of metals like aluminium, iron, stainless steel, tin coated metal, ceramics, glass and plastic or elastomers.

Medium viscous, solventless two-component polyurethane adhesive with high thermal conductivity. The adhesive component contains abrasive filler. Temperature range of use: -40°C to +135°C. The casting resin is used with WEVONAT 600. Applications: Glueing of metals like aluminium, iron, stainless steel, tin coated metal, ceramics, glass and plastic or elastomers.

Two-component encapsulating system based on polyurethane. The resin component is formulated with a nonabrasive mineral filler. The cured polymer exhibits tough-elastic properties as well as outstanding adhesion to most plastic materials, metals and glass and excellent behavior in thermal cycle tests. Temperature range of use: -40°C to +120°C. The product can be used at higher temperatures on a short term basis. The casting resin is used with WEVONAT 507 Applications: Encapsulation of electrical components for low and medium voltage applications like sensors, switches or PCBs.

Two-component encapsulating system based on polyurethane. The resin component is formulated with a nonabrasive mineral filler. The cured polymer exhibits tough-elastic properties as well as outstanding adhesion to most plastic materials, metals and glass and excellent behavior in thermal cycle tests. Temperature range of use: -40°C to +125°C. The casting resin is used with WEVONAT 600 Applications: Encapsulation of electrical components for low and medium voltage applications like sensors, switches or PCBs.

Two-component encapsulating system based on polyurethane with high filler content with high thermal conductivity. The resin component is formulated with a mineral filler which provides self-extinguishing properties without use of halogen compounds. The resin does not contain halogenated flame-retardants, heavy metals or chlorofluorocarbons. The system is tested by Underwriters Labotatories under the File-No. E108835 at a thickness of 6 mm according to UL 94 V-0. The cured polymer exhibits tough-elastic properties as well as outstanding adhesion to most plastic materials, metals and glass and excellent behavior in thermal cycle tests. Temperature range of use: -40°C to +135°C. The casting resin is used with WEVONAT 900 Applications: Encapsulation, sealing or coating of electrical components for low and medium voltage applications like sensors, switches or PCBs.

Two-component encapsulating system based on polyurethane. The resin component is formulated with a mineral filler which provides self-extinguishing properties without use of halogen compounds. The resin does not contain halogenated flame-retardants, heavy metals or chlorofluorocarbons. The cured polymer exhibits tough-elastic properties as well as outstanding adhesion to most plastic materials, metals and glass and excellent behavior in thermal cycle tests. The material achieves UL 94 V-0 properties at a thickness of 6,0 mm and is approved and listed in colours black and nature under the File No. E108835. Temperature range of use: -40°C to +135°C. The casting resin is used with WEVONAT 300 RE Applications: Encapsulation, sealing or coating of electrical components for low and medium voltage applications like sensors, switches or PCBs.

Two-component encapsulating system based on polyurethane. The resin component is formulated with a nonabrasive mineral filler. The cured polymer exhibits tough-elastic properties as well as outstanding adhesion to most plastic materials, metals and glass and excellent behavior in thermal cycle tests. Temperature range of use: -40°C to +140°C. The casting resin is used with WEVONAT 600 Applications: Encapsulation of electrical components for low and medium voltage applications like sensors, switches or PCBs.

Two-component encapsulating system based on polyurethane. The resin component is formulated with a mineral filler which provides self-extinguishing properties without use of halogen compounds. The material achieves UL 94 V-0 properties at a thickness of 6,0 mm and is approved and listed under the File No. E108835.This highly flexible system exhibits outstanding chemical resistance against most common acids and alkali solutions and an excellent flexibility at low temperatures. Temperature range of use: -60°C to +125°C. The casting resin is used with WEVONAT 300 . Applications: Encapsulation and coating of pressure sensitive electrical and electronic compo-nents, e.g. sensors and SMD-equipped PCBs.