Two Component Polyurethane Epic D9940 is 100% Mercury free and has been evaluated to series of automotive test specifications. Epic D9940 can be used in a variety of exterior automotive applications.

Two Component Polyurethane This clear encapsulant is 100% mercury free and exhibits excellent UV resistance. Epic D9970 is flexible, allowing it to be used where more rigid polyurethanes cause stress cracking or shear components off of PCB's during thermal cycle.

Two Component Polyurethane The Epic RM2007 is a medium hardness polyurethane used in the pool and spa filter industry that possesses a fast cure and a biocide to inhibit fungal growth on filters. Application: Moldable End-Cap

Two Component Polyurethane Epic RM2011 is a premium moldable end-cap material that is extremely tear resistant. Its quick gel time allows for the fast processing of end-caps and its medium hardness enables the filter to act as its own gasket. Application: Moldable End-Cap

Epic S7144 is a two component polyurethane system designed for potting electrical and electronic devices. S7144 is a cost effective potting compound with good hydrolytic stability. S7144 has been designed with a convenient 3:1 by volume mix ratio and has a Shore A hardness of 80.

Epic S7214 is a two component polyurethane casting compound, designed with a fast gel time and rapid hardness development for applications where excellent chemical resistance at ambient and elevated temperatures is an important design criterion. When mixed, S7214 results in dark green colored castings allowing operators to identify equipment mix issues immediately.

Epic S7253 is a two component urethane potting material. S7253 is unpigmented and provides a 20 minute pot life. 0ffering a hardness of Shore A = 85, it is flexible for applications requiring some resiliency. S7253 is UL 94 V-0 recognized at 9mm. S7253 is also available in a variety of colors and gel times.

Epic S7280 is a two component urethane based polybutadiene. This polybutadiene character gives S7280 improved elevated temperature properties, as well as good thermal shock and thermal cycling resistance. S7280 is a fast gel version of Epic's popular S7220-02 system.

Epic S7281 is a two component aliphatic polyurethane potting compound designed with a fast cure and convenient 1:1 mix ratio by volume. Due to the low hardness and very low glass transition temperature, S7281 allows expansion and contraction of solder joints and delicate electronic components without causing failures from mechanical stresses. This product also excels in high temperature applications, showing very low weight loss at 125C over extended periods of time.

Epic S7285-02 is a two component polyurethane compound that was formulated for potting electronic control modules (ECM's). The low mixed viscosity of the S7285-02 allows the material to flow into intricate places under printed circuit boards and other tight tolerance areas in a wide variety of electronic devices. Another key property of this product is the 4:1 by volume mix ratio that makes the system very adaptable to meter mix and dispense applications. Offering a hardness of Shore 00 = 50-65, the S7285-02 provides excellent flexibility, therefore allowing delicate surface mounted devices (SMD's) to expand and contract during thermal shocks and thermal cycling. For applications that generate a great deal of heat, this product is also an excellent choice due to its low weight loss at elevated temperatures. S7285-02 has shown extremely low weight loss at 130C - 0.24% after 168 hours. Epic S7285-02 is UL 94 V-0 recognized at 4.5 mm and is RoHS compliant.

Two Component Polyurethane The Epic S7293 series features good tear propagation and low weight loss after 1000 hours @ 275°F. This is an outstanding material for moldable end-cap applications that require a tough tear resistant material and fast gel time for rapid cycle of parts. Application: Moldable End-Cap

Epic S7302 is a tough urethane material designed for electronic potting applications. The chemistry of S7302 lends itself well for products that are exposed to a wide range of temperatures. S7302 is adequate for applications that are thermal cycled between -40C and 135C with excursions up to 160C. S7302 also features good moisture resistance and good adhesion to various metals and plastics.

Epic S7318 is a two component urethane potting compound that is designed for use in high voltage ignition coils. S7318 features low hardness, low mixed viscosity and a long pot life at room temperature. Review of the product data sheet for specific processing instructions is recommended.

Epic S7344 is a two component polybutadiene based polyurethane system designed for electronic potting applications. S7344 features low mixed viscosity, good high temperature stability, and a convenient 1:1 mix ratio by volume. The low hardness of S7344 offers protection for delicate electronic devices subject to thermal cycling and thermal shock.

Epic S7348-01 is a two component urethane potting compound which is recognized for UL 94 V-0 fire retardancy testing at 2.0 mm. S7348-01 is a thermally conductive potting compound providing a relatively low mixed viscosity as well as a moderate gel time.

Two Component Polyurethane The Epic S7350 series has been designed with a fast gel time to provide rapid cycling of parts. This series of products has good moisture tolerance in uncontrolled production environments which reduces waste. The Epic S7350 series is designed to provide superior adhesion to a variety of metals. Application: End-Cap Adhesive

Epic S7351 is a two component, room temperature cure, polybutadiene based polyurethane. S7351 was specifically formulated for potting electronic marine modules (EMM) and is also an excellent candidate for potting electronic control modules (ECM). Due to its low hardness and flexibility, S7351 will not exert stress on delicate surface mounted devices (SMD) on printed circuit boards (PCB) when exposed to extreme thermal cycling typical of marine and automotive electronics applications. S7351 is an excellent alternative to rigid systems that cause failures by not allowing expansion and contraction of delicate components. S7351 provides excellent high temperature properties up to 125C and good chemical resistance.

Epic S7356 is a two component polyurethane potting compound specifically formulated for automotive sensors, switches, and other electrical devices requiring protection from "under the hood" environments. S7356 has successfully passed automotive thermal shock and thermal cycling evaluations and has also proven itself in a wide range of automotive applications. S7356 features a convenient 1:1 mix ratio by volume and low viscosity making it very accommodating to meter mix / dispense applications. S7356 offers a very fast room temperature gel time in a small mass making it an excellent system for applications requiring small amounts of potting material. The fast gel time also provides the advantage of rapid cycling of parts. The Shore A = 60-65 hardness range allows delicate components to expand and contract when exposed to temperature swings without causing physical stress that can create failures.

Two Component Polyurethane Epic S7381 is a high hardness polyurethane casting material for use in filter end-cap applications. The high hardness and rapid cure allow for the fast processing of chemically resistant end-caps. Application: End-Cap Adhesive

Two Component Polyurethane Epic S7445 is formulated with a low viscosity for increased flow when used in the manufacture of HEPA/Air filters. This polyurethane can be used on wood or metal substrates and provides a fast cure with a low exotherm. Application: HEPA / Air Filter Adhesive

Two Component Polyurethane The Epic S7455 series possesses rapid cure and high hardness to allow for the fast processing of chemical resistant end-caps. Epic S7455 series adheres well to various metal and plastic end-cap materials, including Nylon. Application: End-Cap Adhesive

Two Component Polyurethane The Epic S7463 series is a two component polyurethane with a convenient 4:1 volumetric mix ratio and self-leveling viscosity. The S7463 series adheres well to many plastic and metal substrates, and is proven to be a great substitute to plastisol. Application: End-Cap Adhesive

Two Component Polyurethane This premium, RoHS compliant polyurethane potting compound is UL94 V-0 recognized at 4.8 mm. its low mixed viscosity allows it to flow under PCB's and into tight tolerance areas. With a very soft durometer and low weight loss at elevated temperatures, Epic S7475 is suited for applications that will see constant thermocycling.

Two Component Polyurethane Epic S7478 is a flexible polyurethane that is also thermally conductive. It is UL94 V-0 recognized in cross sections as thin as 3 mm and with its superior UL RTI rating, Epic S7478 is useful in applications that generate a significant amount of heat.

Two Component Polyurethane The Epic S7479 is a moderately high hardness polyurethane that gels quickly and contains biocide to inhibit fungal growth for use in the pool and spa industry. Application: Moldable End-Cap

Two Component Polyurethane Epic S7485 is a high performance electrical potting compound. With its high thermal conductivity, excellent electrical properties and low weight loss at elevated temperature, Epic S7485 is suitable for use in high heat generating assemblies.

Two Component Polyurethane Epic S7492 is transparent and is UL94 V-2 recognized for use in applications that require a flame retardant encapsulant. With its low hardness, Epic S7492 is useful in assemblies that will see thermal cycling and thermal shock events.

Two Component Polyurethane Epic S7515 is a crystal clear encapsulant that has exceptional UV resistance. With its low mixed viscosity, Epic S7515 can flow into intricate and tight tolerance locations. Epic S7515 also has a short gel time, allowing for quick turnover of parts in high volume production settings.