BC-809 is a two-component system consisting of Iso (side A) and Curative (side B). It is designed to be used where curing at ambient temperatures and high level of mechanical properties of cured material is desired.

BC-8163 is a very low viscosity, rapid setting, rigid urethane compound. This system will cure quickly to a hard, tough, impact resistant casting. BC-8163 is non-sensitive to moisture after cure and will readily bond to itself if stage pours are required. The one-to-one volumemix ratio makes the system readily adaptable for machine mixing and dispensing. BC-8163 is recommended in applications where a "thermoplastic feel" is desired.

BC-8165 is a low viscosity, rapid setting, rigid urethane compound. Similar to BC-8163, however exhibits an 8 to 10 minute working time. This system will cure quickly to a hard, tough, impact resistant casting. BC-8165 is non-sensitive to moisture after cure and will readily bond to itself if stage pours are required. BC-8165 is recommended for thin wall model and prototype applications where a "thermoplastic feel" is desired. The heat resistance for BC-8165 is 135°F, aheat resistance of 150°F can be achieved by post cure at 150°F for about 2 hours.

BC-8340 is a two-part polyurethane molding system. BC-8340 is mixed one-to-one by volume (or 100 Iso Side A to 95 Curative Side B by weight) and cures at room temperature. BC-8340 contains no fillers and cures to a firm (Shore A40 ± 4), medium amber rubber. Applications BC-8340 is used to make molds of detailed masters that contain moderate undercuts. Some of the most common uses are concrete formliners and to make molds for point-of-purchase displays, rapid prototypes, special effects, taxidermy, and sculpture reproductions.

BC-8360 is a two-part polyurethane molding system. BC-8360 is mixed one-to-one by volume (or 100A-to-95B by weight) and cures at room temperature. BC-8360 contains no fillers and cures to a firm (Shore A60 ± 4), medium amber rubber. Applications BC-8360 is used to make molds of detailed masters that contain shallow undercuts. Some of the most common uses are concrete formliners and to make molds for point-of-purchase displays, rapid prototypes, special effects, taxidermy, and sculpture reproductions.

BC8400 is an unfilled, low viscosity, quick setting two component urethane system. An easy to use 1 to 1 mix ratio (Part A/Part B), BC8400 offers the user a 3 minute working time with parts demoldable in as little as 30 minutes. When properly cured, BC 8400 will exhibit high impact strength and yield thermoplastic-like parts. Some outstanding features include the following: - Mercury free - Moderate heat resistance - 1 to 1 mix ratio - Turns white upon cure - Longer mold life - High impact strength - No objectionable odor - Excellent finishing properties - Thermoplastic appearance - More parts per day

BC-8405 is an unfilled, low viscosity, quick setting two component urethane system. An easy to use 1 to 1 mix ratio (Part A/Part B), BC-8405 offers the user a rationable working time with parts demoldable in as little as 2 hours. When properly cured, BC-8405 will exhibit high impact strength and yield thermoplastic-like parts. Some outstanding features include the following: - Mercury free - Moderate heat resistance - 1 to 1 mix ratio - Turns white upon cure - Longer mold life - High impact strength - No objectionable odor - Excellent finishing properties - Thermoplastic appearance - More parts per day

BC-8860 is a low viscosity two-component urethane casting compound that is specifically formulated for high abrasion and impact resistance. It is recommended for use for the production casting of highly wear-resistant parts and linings. This product is a safe, easy-to-handle, room temperature mixing and curing system that does not contain TDI, MDI, or MOCA. BC-8860 is relatively insensitive to typical environmental moisture and will make good void-free parts without the problems that some conventional urethane systems exhibit.

BC-8870 is a low viscosity two-component urethane casting compound that is specifically formulated for high abrasion and impact resistance. It is recommended for use for the production casting of highly wear-resistant parts and linings. This product is a safe, easy-to-handle, room temperature mixing and curing system that does not contain TDI, MDI, or MOCA. BC-8870 is relatively insensitive to typical environmental moisture and will make good void-free parts without the problems that some conventional urethane systems exhibit.

BC-8880 is a two-part urethane gel coat which exhibits excellent handling characteristics and very low moisture sensitivity. Its characteristics include a high modulus and a high hardness. It is a brushable room temperature curing urethane, which finds many general purpose applications such as foundry patterns, cure box liners, and abrasion resistant pads and bumpers. It may also be used as a urethane adhesive.

BC-8990 is a two-component urethane elastomer compound specifically designed for general purpose molding and casting of various shapes. This product is a safe, easy-to-handle, room temperature mixing and curing system that contains no TDI, MDA or MOCA. BC-8990 may be used to provide abrasion resistant liners, pads and bumpers. The low shrinkage, low viscosity, superior toughness, and excellent detail reproduction of makes this system ideal for general purpose castings and quality tooling operations. It may also be used in potting and encapsulating applications.

BX-31 is a two-part polyurethane molding system. BX-31 is mixed 100iso:97curative by weight (or 1 Pt-A Iso to 1 Pt-B Curative by volume) and cures at room temperature. BX-31 cures to a low hardness, Shore A 31 +/- 2, light yellow rubber. Ultimate properties are obtained after 3-4 days of room temperature cure. Cure can be accelerated with heat (130-150°F for 12-16 hours) but a slightly harder polymer (34 +/- 2 Shore A) and slight shrinkage will be obtained. Applications BX-31 is used to make molds of masters that contain moderate undercuts. BX-31’s physical properties make it ideal for making detailed concrete molds, patterns and formliners.

BX-41 is a two-part polyurethane molding system. BX-41 is mixed 100:97 by weight (or 1 Part-A Iso to 1 Part-B Curative by volume) and cures at room temperature. BX-41 cures to a medium hardness, Shore A 41 +/- 2, lavender rubber. Ultimate properties are obtained after 3-4 days of room temperature cure. Cure can be accelerated with heat (130-150°F for 12-16 hours) but a slightly harder polymer (43 +/- 2 Shore A) and slight shrinkage will be obtained. Applications BX-41 is used to make molds of masters that contain minor undercuts. BX-41’s physical properties make it ideal for making concrete patterns and formliners. BX-41 has been formulated to reduce shrinkage.

BX-51 is a two-part polyurethane molding system. BX-51 is mixed 100:97 by weight (or 1 Part-A Iso to 1 Part-B Curative by volume) and cures at room temperature. BX-51 cures to a medium hardness, Shore A 51± 2, gray rubber. Ultimate properties are obtained after 3-4 days of room temperature cure. Cure can be accelerated with heat (130-150°F for 12-16 hours) but a slightly harder polymer (53 +/- 2 Shore A) and slight shrinkage will be obtained.

BCC Lik-Wood is a low viscosity, quick setting, easy to use casting material. A model or tool cast from Lik-Wood will weigh 60% less than other filled urethane systems. Within 30 minutes after mixing and pouring, Lik-Wood is ready to be carved, sanded, filed, tapped etc. Its amazing wood-like characteristics make it ideal for light-weight backing of laminates and/or surface coats. Perfect for fast take offs, cores, engineering changes, temporary molds, patterns, models, prototypes and bases for die models.