Baytec 32513 system exhibits good adhesion to a variety of clean metal substrates with no need for a primer. It exhibits resistance to common motor and hydraulic oils, including phosphate ester synthetics. Baytec 32513 system can be easily mixed using a static mixer, and reacts quickly at room temperature. As with any product, use of Baytec 32513 system in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability for use.

Baytec ME-120 is a modified diphenylmethane diisocyanate (MDI)-terminated polyether prepolymer based on polytetramethylene ether glycol (PTMEG).

Baytec ME-230 is a modified diphenylmethane diisocyanate (MDI)-terminated polyether prepolymer based on polytetramethylene ether glycol (PTMEG).

Baytec ME-230 is a modified diphenylmethane diisocyanate (MDI)-terminated polyether prepolymer based on polytetramethylene ether glycol (PTMEG).

Baytec ME-230 is a modified diphenylmethane diisocyanate (MDI)-terminated polyether prepolymer based on polytetramethylene ether glycol (PTMEG).

Baytec ME-230 is a modified diphenylmethane diisocyanate (MDI)-terminated polyether prepolymer based on polytetramethylene ether glycol (PTMEG).

Baytec ME-230 is a modified diphenylmethane diisocyanate (MDI)-terminated polyether prepolymer based on polytetramethylene ether glycol (PTMEG).

Baytec ME-230 is a modified diphenylmethane diisocyanate (MDI)-terminated polyether prepolymer based on polytetramethylene ether glycol (PTMEG).

Baytec MP-030 is a diphenylmethane diisocyanate (MDI)-terminated polyether prepolymer based on polypropylene ether glycol (PPG).

Baytec MP-080 diphenylmethane diisocyanate (MDI)-terminated polyether prepolymer is based on polypropylene ether glycol (PPG).

Baytec MP-101 is a diphenylmethane diisocyanate (MDI)-terminated polyether prepolymer based on polypropylene ether glycol (PPG).

Baytec MP-120 is a diphenylmethane diisocyanate (MDI)-terminated polyether prepolymer based on polypropylene ether glycol (PPG).

Baytec MS-041 is a modified diphenylmethane diisocyanate (MDI)-terminated polyester prepolymer used in the manufacture of high-property solid cast polyurethane elastomers. The excellent resilience and low compression-set properties have enabled this material to be used for low-durometer printing rolls and squeegee blades. As with any product, use of Baytec MS-041 prepolymer in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Baytec MS-041 is a modified diphenylmethane diisocyanate (MDI)-terminated polyester prepolymer used in the manufacture of high-property solid cast polyurethane elastomers. The excellent resilience and low compression-set properties have enabled this material to be used for low-durometer printing rolls and squeegee blades. As with any product, use of Baytec MS-041 prepolymer in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Baytec MS-051 is a modified diphenylmethane diisocyanate (MDI)-terminated polyester prepolymer used in the manufacture of high-property solid cast polyurethane elastomers. The excellent resilience and low compression-set properties have enabled this material to be used for low-durometer wheels, printing rolls, and squeegee blades. As with any product, use of Baytec MS-051 prepolymer in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Baytec MS-051 is a modified diphenylmethane diisocyanate (MDI)-terminated polyester prepolymer used in the manufacture of high-property solid cast polyurethane elastomers. The excellent resilience and low compression-set properties have enabled this material to be used for low-durometer wheels, printing rolls, and squeegee blades. As with any product, use of Baytec MS-051 prepolymer in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Baytec MS-052 is a modified diphenylmethane diisocyanate (MDI)-terminated polyester prepolymer used in the manufacture of high-property solid cast polyurethane elastomers. When extended with 1,4-butanediol, this material complies with FDA regulation 21 CFR 177.2600 (Rubber Articles Intended for Repeated Use) and may be used for wet and dry repeated-use food-contact applications. When extended with HQEE, it complies with 21 CFR 177.1680 (Polyurethane Resins) and may be used for repeated-use food contact only with dry foods having no free surface fats or oils. As with any product, use of Baytec MS-052 prepolymer in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Baytec MS-052 is a modified diphenylmethane diisocyanate (MDI)-terminated polyester prepolymer used in the manufacture of high-property solid cast polyurethane elastomers. When extended with 1,4-butanediol, this material complies with FDA regulation 21 CFR 177.2600 (Rubber Articles Intended for Repeated Use) and may be used for wet and dry repeated-use food-contact applications. When extended with HQEE, it complies with 21 CFR 177.1680 (Polyurethane Resins) and may be used for repeated-use food contact only with dry foods having no free surface fats or oils. As with any product, use of Baytec MS-052 prepolymer in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Baytec MS-080 modified diphenylmethane diisocyanate (MDI)-terminated polyester prepolymer is used in the manufacture of high-property solid cast polyurethane elastomers. As with any product, use of Baytec MS-080 prepolymer in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.

Baytec MS-092 is a modified diphenylmethane diisocyanate (MDI)-terminated polyester prepolymer. It is used in the manufacture of high-property solid cast polyurethane elastomers. As with any product, use of Baytec MS-092 prepolymer in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Baytec MS-092 is a modified diphenylmethane diisocyanate (MDI)-terminated polyester prepolymer. It is used in the manufacture of high-property solid cast polyurethane elastomers. As with any product, use of Baytec MS-092 prepolymer in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Baytec MS-242 is a modified diphenylmethane diisocyanate (MDI)-terminated polyester prepolymer. It is used in the manufacture of high-property solid cast polyurethane elastomers, such as forklift tires, sheet goods, wheels, rollers, and seals. As with any product, use of Baytec MS-242 prepolymer in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Baytec MS-242 is a modified diphenylmethane diisocyanate (MDI)-terminated polyester prepolymer. It is used in the manufacture of high-property solid cast polyurethane elastomers, such as forklift tires, sheet goods, wheels, rollers, and seals. As with any product, use of Baytec MS-242 prepolymer in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Baytec RTC-V85 Component A is a four component, 100%-solid rotational casting system, which can make urethane elastomers in a range of hardness (72 to 93 Shore A). The isocyanate component is a modified diphenylmethane diisocyanate (MDI) prepolymer, and the three polyol components are polyether polyol blends. The system is a special, fast reacting system designed to be cast on rotating roll cores using the rotational casting technique. Typical applications are on rolls for the paper, textile, and steel industries and belt rollers. This system can be pigmented to most any color. As with any product, use of the Baytec RTC-V85 Component A in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Baytec RTC-V85 Component A is a four component, 100%-solid rotational casting system, which can make urethane elastomers in a range of hardness (72 to 93 Shore A). The isocyanate component is a modified diphenylmethane diisocyanate (MDI) prepolymer, and the three polyol components are polyether polyol blends. The system is a special, fast reacting system designed to be cast on rotating roll cores using the rotational casting technique. Typical applications are on rolls for the paper, textile, and steel industries and belt rollers. This system can be pigmented to most any color. As with any product, use of the Baytec RTC-V85 Component A in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Baytec RTC-V85 Component A is a four component, 100%-solid rotational casting system, which can make urethane elastomers in a range of hardness (72 to 93 Shore A). The isocyanate component is a modified diphenylmethane diisocyanate (MDI) prepolymer, and the three polyol components are polyether polyol blends. The system is a special, fast reacting system designed to be cast on rotating roll cores using the rotational casting technique. Typical applications are on rolls for the paper, textile, and steel industries and belt rollers. This system can be pigmented to most any color. As with any product, use of the Baytec RTC-V85 Component A in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Baytec RTC-V85 Component A is a four component, 100%-solid rotational casting system, which can make urethane elastomers in a range of hardness (72 to 93 Shore A). The isocyanate component is a modified diphenylmethane diisocyanate (MDI) prepolymer, and the three polyol components are polyether polyol blends. The system is a special, fast reacting system designed to be cast on rotating roll cores using the rotational casting technique. Typical applications are on rolls for the paper, textile, and steel industries and belt rollers. This system can be pigmented to most any color. As with any product, use of the Baytec RTC-V85 Component A in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Baytec RTC-092A is a two-component, 100%-solid rotational casting system with a Shore hardness of 92A. The isocyanate component is a modified diphenylmethane diisocyanate (MDI) prepolymer, and the polyol component is a polyether polyol blend. Baytec RTC-092A is a fast reacting system designed to be cast on rotating roll cores using the rotational casting technique. The system is typically used on rollers for the paper, textile, and steel industries and belt rollers. It can be pigmented to almost any color. As with any product, use of the Baytec RTC-092A system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Baytec SPR-055D is a two-component, 100%-solids thick film coating spray system with a Shore D hardness of 55*. The isocyanate component is a modified diphenylmethane diisocyanate (MDI) prepolymer, and the B component is a polyether polyol amine blend. The system has added UV stabilizers and is used to protect concrete and steel structures in heavy duty industrial environments from corrosion, abrasion and weathering. The system is unpigmented and can be custom colored. Typical applications include wastewater infrastructure, primary and secondary containment, pipes, truckbeds, mining and other industrial surfaces. As with any product, use of the Baytec SPR-055D system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Baytec SPR-066A is a two-component, 100%-solids spray system with a Shore hardness of 66A. The isocyanate component is a modified diphenylmethane diisocyanate (MDI) prepolymer, and the polyol component is a polyether polyol blend. The system has added UV stabilizers and is used in spray applications to improve the corrosion, weather, and abrasion resistance of metal, concrete, wood, plastic, PVC, and porous organic and inorganic materials. In-mold spray application is also possible. Typical applications are liners for dump bodies, garbage trucks, pipes, and tanks, as well as protective layers for flexible foam, wood, and industrial surfaces. This system is also available as a grey/black-pigmented system, Baytec SPR-166A (product code U832). As with any product, use of Baytec SPR-066A in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Baytec SPR-085A is a two-component, 100%-solids spray system with a Shore A hardness of 85. The isocyanate component is a modified diphenylmethane diisocyanate (MDI) prepolymer, and the polyol component is a polyether polyol blend. The system has added UV stabilizers and is used in spray applications to improve the corrosion, weather, and abrasion resistance of metal and concrete. It also improves weather and abrasion resistance when applied to wood, plastic, and porous organic and inorganic materials. In-mold application is also possible. Typical uses are for the protection of pipes, tanks, fabrics, and wood, as well as protective surfaces for flexible, rigid, and structural foams. The system can be pigmented to almost any color. As with any product, use of the Baytec SPR-085A system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Baytec SPR-092A is a two-component, 100%-solids spray system with a Shore A hardness of 92. The isocyanate component is a modified diphenylmethane diisocyanate (MDI) prepolymer, and the polyol component is a polyether polyol blend. The system has added UV stabilizers and is used in spray applications to improve the corrosion, weather, and abrasion resistance of various surfaces. In-mold application is also possible. Typical applications include protective layers for pipes, tanks, fabrics, wood, flexible foams, and other industrial surfaces. The system can be pigmented to almost any color. As with any product, use of the Baytec SPR-092A system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Baytec SPR-186A is a two-component 100%-solids spray system with a Shore A hardness of 86. The isocyanate component is a modified diphenylmethane diisocyanate (MDI) qusi-prepolymer and the polyol component is a polyether blend. The system can be pigmented to most any color. As with any product, use of the Baytec SPR-186A in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Baytec SPR-256D is a two-component, 100%-solids spray system with a Shore hardness of 56D. The isocyanate component is a modified diphenylmethane diisocyanate (MDI) prepolymer, and the polyol component is a polyether polyol blend. Baytec SPR-256D spray system is typically used for in-mold spray applications with polyurethane structural composites. As with any product, use of Baytec SPR-256D in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.

Baytec WP-260 dicyclohexylmethane diisocyanate (HMDI)-terminated polyether prepolymer is based on polypropylene ether glycol (PPG). It is used in the formulation of two-component elastomer and binder systems. Polyurethanes from Baytec WP-260 prepolymer can be made optically clear, light-stable, and weather-resistant. They can range from rigid to flexible depending on the coreactant used. Typical uses include tooling resins, potting and encapsulation, and decorative applications. The material 's low viscosity allows for easy production of complex parts with good surface definition. As with any product, use of the Baytec WP-260 prepolymer in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.