F-10 is a medium molecular weight PVC homopolymer dispersion resin with low residual surfactant content. Plastisol prepared using F-10 exhibit low paste viscosity as well as excellent clarity and heat stability. Applications include sheet goods flooring wearlayer, low density chemical blow foam and strand coating.

F-113 has been developed primarily to meet the processing requirements of the vinyl composition tile (VCT) manufacturers. In addition to vinyl floor tile industry, F-113 has found success in protective and strippable coatings.

F-186 is a medium molecular vinyl chloride/vinyl acetate copolymer suspension resin. This resin is primarily used in the calendaring and extrusion of rigid film. F-186 has also found success in applications where clarity and increased toughness is required such as solution coatings on various substrates.

F-24A is a low molecular weight PVC homopolymer dispersion resin which has been developed primarily for use in chemically expanded compounds as well as other applications where rapid gelation and physical property development at low temperature are required. In expanded systems, the product exhibits a fine uniform cell structure in a variety of formulations and over a wide range of processing conditionals. F24A is further characterized as displaying good plastisol viscosity and viscosity stability.

F-260 is a fine particle size PVC homopolymer plastisol blending resin. It combines excellent fusion characteristics, low plastisol viscosities as well as lot to lot uniformity. In combination with dispersion resin, F-260 has been successfully used in top coats, chemically blown foam, and various molding processes

F-2612 is a fine particle size of vinyl chloride-vinyl acetate copolymer blending resin. It combines the viscosity-reducing properties with the lower gelling temperatures of vinyl acetate copolymer. The product has been designed for using in applications where rapid gelation and fusion is a requirement, due to low processing temperatures.

F-265 is a fine particle size polyvinyl chloride vinyl acetate copolymer plastisol blending resin. The product has been designed for use in application where rapid gelation and fusion is a requirement, due to low processing temperatures. When used in combination with copolymer dispersion resin, F-265 has been successfully used in carpet backing, automotive sealants and underbody coatings as well as walk-off mats.

F-28 is a high molecular weight PVC homopolymer dispersion resin which exhibits low paste viscosities as well as low residual surfactant content. This product was designed for a diversity of application such as dip coating, slush molding, rotocasting, organosols and other areas where high strength properties are essential.

F-34 is a medium molecular weight PVC homopolymer dispersion resin which has been developed primarily for use in chemically expanded compound. In expanded systems, the product exhibits a fine uniform cell structure in a variety of formulations and over a wide range of processing conditions.

F-40 is a vinyl chloride vinyl acetate copolymer dispersion resin with low paste viscosities, excellent heat stability, and rapid fusion characteristics. F-40 has been successfully used in mechanically frothed foam, solid rug backing, laminating, fabric coating, flocking adhesives sealants, and many other applications.

F-45 is a vinyl chloride vinyl acetate copolymer dispersion resin with low paste viscosities, excellent heat stability, and rapid fusion characteristics. F-45 has been successfully used in mechanically frothed foam, solid rug backing, laminating, fabric coating, flocking adhesives sealants, and many other applications.

F608 is a low molecular weight PVC homopolymer of particular interest in rigid applications and has established a deserved reputation for low gels, and exceptional early color heat stability. These properties, along with outstanding lot to lot uniformity have made F608 an industry-wide standard for rigid formulations.

F614 is a medium-low molecular weight PVC homopolymer of particular interest in rigid applications and has established a deserved reputation for freedom from gels, and exceptional early color heat stability. These properties, along with outstanding lot to lot uniformity have made F614 an industry-wide standard for rigid formulations.

F616K is a medium-low molecular weight PVC homopolymer of particular interest in rigid applications and has established a deserved reputation for freedom from gels, and exceptional early color heat stability. These properties, along with outstanding lot to lot uniformity have made F616K an industry-wide standard for rigid formulations.

F622 is a medium-low molecular weight PVC homopolymer designed primarily for rigid extrusion applications, but it is also suitable for many flexible applications. This product has high bulk density and excellent dry flow characteristics, making it desirable for dry blending applications where uniform feed rate to an extruder is important.

F622E is a medium-low molecular weight PVC designed primarily for rigid extrusion applications. This product has excellent dry flow characteristics, making it desirable for dry blending applications where uniform feed rate to an extruder is important.

F622F is a medium-low molecular weight PVC homopolymer designed primarily for rigid extrusion applications, but it is also suitable for many flexible applications. This product has high bulk density and excellent dry flow characteristics, making it desirable for dry blending applications where uniform feed rate to an extruder is important.

F622R is a medium-low molecular weight PVC homopolymer of interest in both rigid and flexible applications and has established a deserved reputation for low gels, and exceptional early color heat stability. These properties, along with outstanding lot to lot uniformity, have made F622R an industry-wide standard for both rigid and flexible formulations.

F622S is a medium-low molecular weight PVC homopolymer designed primarily for rigid extrusion applications, but it is also suitable for many flexible applications. This product has high bulk density and excellent dry flow characteristics, making it desirable for dry blending applications where uniform feed rate to an extruder is important.

F676 is a medium molecular weight PVC homopolymer suitable for flexible applications and is exceptionally low in gels and finds wide acceptance in calendered film, sheeting and blow molding.

F676A is a medium molecular weight PVC homopolymer suitable for flexible applications and is exceptionally low in gels and finds wide acceptance in calendered film, sheeting and blow molding.

F676H is a medium molecular weight PVC homopolymer suitable for flexible applications and is exceptionally low in gels and finds wide acceptance in calendered film, sheeting and blow molding. Suggested Applications: Calendering, Blown Flexible Films, Wire Insulation and Meat Wrap.

F680 is especially suited for processing from powder blends due to its ability to rapidly absorb plasticizers regardless of molecular weight. In addition, this product offers: - Excellent Electrical Properties - Low Contamination - Low Gel Content - Excellent Heat Stability - High Finished Product Physical Properties - Lot To Lot Uniformity

F680A is especially suited for processing from powder blends due to its ability to rapidly absorb plasticizers regardless of molecular weight. In addition, this product offers: - Excellent Electrical Properties - Low Contamination - Low Gel Content - Excellent Heat Stability - High Finished Product Physical Properties - Lot To Lot Uniformity - Anti-stat Suggested Applications: Flexible Calendering, Extrusion, Medical, Meat Wrap and Blown Film.

F680 is especially suited for processing from powder blends due to its ability to rapidly absorb plasticizers regardless of molecular weight. In addition, this product offers: - Excellent Electrical Properties - Low Contamination - Low Gel Content - High Finished Product Physical Properties - Lot To Lot Uniformity - Excellent Heat Stability Suggested Applications: Flexible Calendaring, Extrusion, Medical, Meat Wrap and Blown Film

F685 is especially suited for processing from powder blends due to its ability to absorb plasticizers regardless of molecular weight. This is a coarser, higher Bulk Density resin especially designed for better flow and higher production rates in extruders. In addition, this product offers: - Excellent Electrical Properties - Low Contamination - Low Gel Content - Excellent Heat Stability - High Finished Product Physical Properties - Lot To Lot Uniformity Suggested Applications: Flexible Extrusion, Wire and Cable, Meat Wrap and Blown Film

F685A is especially suited for processing from powder blends due to its ability to absorb plasticizers regardless of molecular weight. This is a coarser, higher Bulk Density resin especially designed for better flow and higher production rates in extruders. In addition, this product offers: - Excellent Electrical Properties - Low Contamination - Low Gel Content - Excellent Heat Stability - High Finished Product Physical Properties - Lot To Lot Uniformity - Anti-stat Suggested Applications: Flexible Extrusion, Wire and Cable, Meat Wrap and Blown Film

F690 is especially suited for processing from powder blends due to its ability to rapidly absorb plasticizers regardless of molecular weight. In addition, this product offers: - Excellent Electrical Properties - Low Contamination - Low Gel Content - Excellent Heat Stability - High Finished Product Physical Properties - Lot To Lot Uniformity

The APW compounds have been designed for profile extrusions in window lineals, fencing and other outdoor weatherable markets. They exhibit excellent whiteness, surface and processing properties in a wide range of applications.

Formolon® AW02 is a NSF/ANSI Standard 14 certified medium molecular weight dry blend PVC compound. This compound has been engineered primarily for rigid extrusion applications. The exceptional stability properties provide a consistent whiteness that enhances the finish and marketability of the end product.

Formolon® AW04 is a NSF/ANSI Standard 14 certified medium molecular weight dry blend PVC compound. This compound has been engineered primarily for rigid extrusion applications. The exceptional stability properties provide a consistent whiteness that enhances the finish and marketability of the end product.

The AWS compounds have been designed for profile extrusions in indoor and non-weatherable applications and substrates for outdoor applications. They exhibit a natural color and exceptional processing properties for high rate profile extrusion.

F-KVF is a medium molecular weight, fine particle PVC homopolymer dispersion which imparts pseudoplastic flow to plastisol in which it is used. Plastisols prepared utilizing F-KVF are used in dip, slush and rotational molding where mold release and pseudoplasticity are desired. Fabric coating where minimum strike through is essential as well as screen printing application where fine particle size and pseudoplasticity is required.

F-KVH is a high molecular weight PVC homopolymer dispersion resin which imparts pseudoplastic flow where it is used. Plastisol prepared utilizing F-KVH is particularly suited for dip, slush and rotational molding where mold release and pseudoplasticity is desired as well as fabric coating applications where minimum strike through is essential.

F-NVA is a high molecular weight PVC dispersion resin with low residual surfactant content. Plastisols containing F-NVA exhibit low paste viscosities and good viscosity stability. This product is presently being utilized in a variety of applications where the resulting films or coating require high tensile strength and resistance to abrasion.