Silicone: Silicone
Product | Availability | Product Description |
---|---|---|
LightSpan® LS2-6140 | Africa & Middle East |
Optically clear primerless silicone encapsulant
DESCRIPTION
- Two Part, Transparent, 1:1 Mix ratio (A:B)
- Low volatility and high purity
- High tensile strength, low viscosity
- REACh and RoHS compliant
- Tested per UL-94 and passed V-0
- Requires heat to cure
APPLICATION
- Designed for optically harsh environments such as High Power LED and UV LED packages
- Generates zero defect devices (See Appendix 1)
- Adheres to ceramic, PPA and aluminum without a primer (See Appendix 1)
- Has excellent thermal stability (See Appendix 1)
- Protects electrical components and assemblies against shock, vibration, moisture, dust, chemicals, and other environmental hazards
|
LightSpan® LS-3238 | Africa & Middle East |
High purity, dielectric, firm silicone gel
DESCRIPTION
- High purity, optically clear, firm silicone gel
- Two medium viscosity components blend easily in a convenient 1:1 ratio by weight or volume
APPLICATION
- For potting, encapsulating, backfilling, and dampening applications requiring a firm gel with optical clarity
- Recommended for use with automatic dispense systems
- For applications requiring an operating temperature range of -65°C to 200°C (-85°F to 392°F)
|
LightSpan® LS3-3354 | Africa & Middle East |
Optically clear primerless adhesive silicone gel
DESCRIPTION
- High purity, optically clear, soft silicone gel
- Medium viscosity components can be blended in a convenient 1:1 ratio by weight or volume
- Cures at room temperature in 24 hours
- 1.54 refractive index
- Good UV Resistance
- Good adhesion without the use of primer
APPLICATION
- For potting, encapsulating, backfilling, and dampening applications requiring a soft gel with optical clarity
- Viscosity is excellent for dispersing phosphors to obtain high brightness white light
- For applications requiring an operating temperature range of -40°C to 200°C (-40°F to 392°F) or for soldering operations up to 260°C (500°F) for 1 to 2 minutes.
|
LightSpan® LS-3441 | Africa & Middle East |
High purity, dielectric, firm silicone gel
DESCRIPTION
- High purity, optically clear, firm silicone gel
- Two medium viscosity components blend easily in a convenient 1:1 ratio by weight or volume
APPLICATION
- For potting, encapsulating, backfilling, and dampening applications requiring a firm gel with optical clarity
- Recommended for use with automatic dispense systems
- For applications requiring an operating temperature range of -65°C to 200°C (-85°F to 392°F)
|
LightSpan® LS-3443 | Africa & Middle East |
Optically clear, diphenyl, firm silicone gel
DESCRIPTION
- A two-part encapsulation gel
- A 1.43 refractive index
- 1:1 Mix Ratio (Part A:B)
APPLICATION
- For protection of sensitive photonics assemblies from mechanical shock, thermal shock, dust, and ambient atmosphere
- For use in extreme temperatures: features an operating an operating temperature range of -115°C to 265°C (-178°F to 500°F)
|
LightSpan® LS-6140 | Africa & Middle East |
Low consistency elastomer
DESCRIPTION
- Two-part, optically clear silicone system
- Based on a methyl silicone polymer
- Low viscosity
- 1:1 Mix Ratio (Part A:B)
APPLICATION
- For bonding, casting or injection molding of high performance optical components
- For applications requiring index matching at 1.40
- For photonics applications requiring low outgassing and minimal volatile condensables to avoid condensation in sensitive devices
|
LightSpan® LS-6941 | Africa & Middle East |
Optical thermoset
DESCRIPTION
- Two-part, optically clear, solvent free, low viscosity silicone
- Cures at room temperature or rapidly with heat
- 10:1 Mix Ratio (Part A:B)
APPLICATION
- For bonding, casting or injection molding of high performance optical components
- For applications requiring index matching at 1.41
- For applications requiring an operating temperature range of -65 to 240°C (–85 to 465°F)
|
LightSpan® LS-6943 | Africa & Middle East |
Optical thermoset
DESCRIPTION
- Solvent-free, low viscosity, clear, two-part silicone elastomer
- Accelerated cure rate with heat
- Based on a dimethyl diphenyl silicone copolymer
- 10:1 Mix Ratio (Part A:B)
APPLICATION
- For bonding, casting or injection molding of high performance optical components
- For applications requiring index matching at 1.43
- For applications requiring an operating temperature range of -115 to 260°C (–175 to 500°F)
|
LightSpan® LS-6946 | Africa & Middle East |
Optical thermoset
DESCRIPTION
- Two-part, optically clear, silicone system that pours
- Cures at room temperature or rapidly with heat
- Offers good physical properties and a broad operating temperature range
- 1:1 Mix Ratio (Part A:B)
APPLICATION
- For bonding, casting or injection molding of high performance optical components
- For applications requiring index matching at 1.46
|
LightSpan® LS-8941 | Africa & Middle East |
Optically clear, high durometer silicone elastomer
DESCRIPTION
- Two-part, optically clear, non-phenyl containing addition cure silicone
- Designed to stay thermo-optically stable with heat and UV exposure
- 24 hours minimum work time
- 80 Type A durometer aids with scratch resistance and reduces tackiness
APPLICATION
- For molding or casting hard, non-yellowing lenses for LED, solar or other applications where a hard, optically-stable silicone is needed
- Viscosity is designed to be used with conventional Liquid Injection Molding equipment, and the material is self-leveling for casting application techniques
|
LiPOLY® TPS587/588/589 | Africa & Middle East |
Two-Pack Thermal Conductive Sealing
LiPOLY TPS587/588/589 is a two-pack silicone material for gap filling. The viscosity and flowing is very low. The high deformation material, which can filling the gap closely, cover the tolerance, and has outstanding conductivity, makes is suitable for filling the peculiar gap.
LiPOLY´s ability of research and development is providing our best thermal solution to customers, which can satisfy customer special requirement on advanced product.
Features-
- Thermal conductivity: 2.0/1.5/0.8 W/m*K
- Tow-parts package and easy to use
- Waterproof and air-tight
Typical Applications-
- Automotive electronics
- Telecommunications
- Computer and peripherals
- Thermally conductive vibration dampening
- Between any heat-generating component and a heat sink
|
LiPOLY® T-top81 | Africa & Middle East |
Ultra Soft & Highly Thermally Conductive Gap Filler
LiPOLY T-top81 is a high deflection gap pad,with outstanding thermal conductivity and low thermal resistance in formshape. T-top81 offers excellent compression, filling small air gaps on uneven surfaces, ensuring an efficient and consistent transfer of heat. T-top81 was designed for thermal modules with limited gap sizes and low compression force.
Features-
- Thermal conductivity: 8.0 W/m*K
- High compression rate
- Low thermal impedance
- Silicone compound
- UL 94V-0 qualified
Typical Applications-
- Between CPU and heat sink.
- Between a component and heat sink
- Flat-panel displays
- Power supplies
- High speed mass storage drives
- Telecommunication hardware
|
LiPOLY® T-work8000 | Africa & Middle East |
Ultra Soft & Highly Thermally Conductive Gap Filler
LiPOLY T-work8000 is a high performance thermally conductive interface pad. T-work8000 offers outstanding thermal conductivity at 15.0 W/m*K and extremely low thermal resistance under minimalforce. T-work8000 offers excellent compression, filling small air gaps and uneven surfaces, ensuring an efficient and consistent transfer of heat. T-work8000 is designed for the most demanding of applications.
Features-
- Thermal conductivity: 15.0 W/m*K
- High compression rate
- Extremely low thermal impedance
Typical Applications-
- Between CPU and heat sink.
- Between a component and heat sink.
- Flat-panel displays
- Power supplies
- High speed mass storage drives
- Telecommunication hardware
|
LiPOLY® T-work9000 | Africa & Middle East |
Ultra Soft & Highly Thermally Conductive Gap Filler
LiPOLY T-work9000 is a high performance thermally conductive interface pad. T-work9000 offers outstanding thermal conductivity at 20.0 W/m*K and extremely low thermal resistance under minimal force. T-work9000 offers excellent compression, filling small air gaps and uneven surfaces, ensuring an efficient and consistent transfer of heat. T-work9000 is designed for the most demanding of applications.
Features-
- Thermal conductivity: 20.0 W/m*K
- High compression rate
- Extremely low thermal impedance
Typical Applications-
- Between CPU and heat sink.
- Between a component and heat sink.
- Flat-panel displays
- Power supplies
- High speed mass storage drives
- Telecommunication hardware
|
Liveo™ Biomedical Grade ETR Elastomer Q7-4535 | Africa & Middle East |
Enhanced Tear Resistant (ETR) High Consistency Rubber silicone elastomers for peroxide cure
|
Liveo™ Biomedical Grade ETR Elastomer Q7-4550 | Africa & Middle East |
Enhanced Tear Resistant (ETR) High Consistency Rubber silicone elastomers for peroxide cure
|
Liveo™ Biomedical Grade ETR Elastomer Q7-4565 | Africa & Middle East |
Enhanced Tear Resistant (ETR) High Consistency Rubber silicone elastomers for peroxide cure
|
Liveo™ BioMedical Grade HCR Q7-4720 | Africa & Middle East | |
Liveo™ BioMedical Grade HCR Q7-4735 | Africa & Middle East | |
Liveo™ BioMedical Grade HCR Q7-4750 | Africa & Middle East | |
Liveo™ BioMedical Grade HCR Q7-4765 | Africa & Middle East | |
Liveo™ BioMedical Grade HCR Q7-4780 | Africa & Middle East |
Raw material for medical device fabrication in the Healthcare Industry
|
Liveo™ BioMedical Grade LSR 7-4860 | Africa & Middle East |
Liquid Silicone Rubber raw materials for medical device and component fabrication in the Healthcare Industry
|
Liveo™ BioMedical Grade LSR 7-4870 | Africa & Middle East |
Liquid Silicone Rubber raw materials for medical device and component fabrication in the Healthcare Industry
|
Liveo™ BioMedical Grade LSR 7-6830 | Africa & Middle East |
Liquid Silicone Rubber raw materials for medical device and component fabrication in the Healthcare Industry
|
Liveo™ BioMedical Grade LSR 7-6840 | Africa & Middle East |
Liquid Silicone Rubber raw materials for medical device and component fabrication in the Healthcare Industry
|
Liveo™ BioMedical Grade LSR 7-6860 | Africa & Middle East |
Liquid Silicone Rubber raw materials for medical device and component fabrication in the Healthcare Industry
|
Liveo™ BioMedical Grade LSR Q7-4840 | Africa & Middle East |
Liquid Silicone Rubber raw materials for medical device and component fabrication in the Healthcare Industry
|
Liveo™ BioMedical Grade LSR Q7-4850 | Africa & Middle East |
Liquid Silicone Rubber raw materials for medical device and component fabrication in the Healthcare Industry
|
Liveo™ BioMedical Grade LSR Q7-7840 | Africa & Middle East |
Liquid Silicone Rubber (LSR) raw material for medical device and component fabrication in the Healthcare Industry
|
Liveo™ BioMedical Grade LSR Q7-7850 | Africa & Middle East |
Liquid Silicone Rubber (LSR) raw material for medical device and component fabrication in the Healthcare Industry
|
Liveo™ BioMedical Grade LSR Q7-7870 | Africa & Middle East |
Liquid Silicone Rubber (LSR) raw material for medical device and component fabrication in the Healthcare Industry
|
Liveo™ C6-720 LSR | Africa & Middle East |
Liquid Silicone Rubber (LSR) raw material for medical device and component fabrication in the Healthcare Industry
|
Liveo™ C6-740 LSR | Africa & Middle East |
Liquid Silicone Rubber (LSR) raw material for medical device and component fabrication in the Healthcare Industry
|
Liveo™ C6-750 LSR | Africa & Middle East |
Liquid Silicone Rubber (LSR) raw material for medical device and component fabrication in the Healthcare Industry
|
Liveo™ C6-770 LSR | Africa & Middle East |
Liquid Silicone Rubber (LSR) raw material for medical device and component fabrication in the Healthcare Industry
|
Liveo™ Class VI Elastomer C6-350LH Parts A & B | Africa & Middle East |
High Consistency Rubber with platinum cure Raw materials with enhanced physical properties for healthcare industry fabrication
|
Liveo™ Class VI Elastomers C6-135 Parts A & B | Africa & Middle East |
High Consistency Rubber silicone elastomers for device and component fabrication in the healthcare industry
|
Liveo™ Class VI Elastomers C6-150 Parts A & B | Africa & Middle East |
High Consistency Rubber silicone elastomers for device and component fabrication in the healthcare industry
|
Liveo™ Class VI Elastomers C6-165 Parts A & B | Africa & Middle East |
High Consistency Rubber silicone elastomers for device and component fabrication in the healthcare industry
|