UNIGARD™ HP DGDD-1430 Natural is a flame-retardant thermoplastic insulation compound developed for communications cable use. It provides a good balance of high flame retardance, excellent electrical and physical properties and good processing capability. DGDD-1430 Natural is used in a broad range of applications including both thin wall and COAX insulations for National Electric Code Article 725 and 800 applications. With proper cable design and jacketing material selection, DGDD-1430 insulations substantially contribute to passing the IEEE-383/UL-1581 vertical tray, CSA FT-4 vertical tray and UL-1666 riser cable burn tests.

UNIGARD™ RE DFDA-1638 Natural is a non-halogen, flame retardant, thermoplastic, low smoke, low corrosive, and low toxic compound. It has been designed for general purpose, medium and low voltage applications. If needed, standard color concentrates (EVA or PE based) can be used. Used as jacket, it is designed to pass the IEC-332-3, the IEEE-383/UL-1685 vertical tray cable burn tests. Cable construction, of course, plays an important role in flame performance. DFDA-1638 Natural can be used as jacket for 90°C rated cables. DFDA-1638 Natural is also designed to maximize processing and flame performance. This compound can sustain extrusion temperatures up to 362°F (200°C) and can be extruded in typical single-flight metering PE screws, barrier screws, Maddock screws, and screws with mixing pins. Features UNIGARD RE DFDA-1638 Natural provides the following features: - Highly flame retardant (VW-1, IEC-332-3, IEEE 383 flame test ratings) - Environmentally friendly (lead-free, halogen-free, sulfur/antimony-free) - Low smoke, low corrosivity, and low toxicity - UV stabilized - Contains copper inhibitor - Ease of extrusion and no special screw required - Good electrical properties, moisture resistance, and fluid resistance - Good balance of toughness and flexibility - Excellent cut-through, crush, and abrasion resistance - Colorable for insulation and jacket applications

UNIGARD™ RE DFDA-1980 Natural is a thermoplastic non-halogen colorable flame retardant polyolefin compound with excellent flame retardant and processing properties for use in a variety of jacketing applications. Features DFDA-1980 Natural provides the following features: - Good flame retardance - Environmentally friendly (lead-free, halogen-free, sulfur/antimony-free) - Low smoke, low corrosivity and low toxicity - Ease of extrusion with no special screw required - Colorable with EVA or PE based color concentrates

UNIGARD™ RE DFDC-1638 Black is a non-halogen, highly flame retardant, thermoplastic, low smoke, low corrosive, and low toxic compound. It is designed for general purpose cable jacket applications. Used as jacket, it easily passes the IEEE-383/UL-1685 (Limited Smoke Test) vertical tray cable burn tests. Cable construction, of course, plays an important role in flame performance. It can be used as a jacket on cables operating at up to 90°C. This compound can replace PVC, low smoke PVC, and halogenated rubbers as a jacket with excellent fire safety (low smoke, low corrosivity, and low toxicity) and good property balance. This compound meets or exceeds many industry jacket specifications: UL-1277 Tray Cable, UL Subject 444 for general purpose communication cable, mass transit applications, and several international applications. As a non-halogen, flame retardant jacket, DFDC-1638 Black is also designed to replace the conventional non-halogen jacket products. This compound has much better process-ability than current non-halogen jacket products. It can sustain a higher extrusion temperature (up to 392°F [200°C]), and can be extruded in the typical single-flight metering PE screws. Features UNIGARD RE DFDC-1638 Black provides the following features: - Highly flame retardant (IEEE 383 flame test rating) - Environmentally friendly (lead-free, halogen-free, sulfur/antimony-free) - Low smoke, low corrosivity, and low toxicity - Ease of extrusion and no special screw required - Excellent cut-through, crush, and abrasion resistance - Good UV, moisture and fluid resistance - Good balance of toughness and flexibility - Track and erosion resistant

UNIGARD™ RE DFDE-1638 Natural is a non-halogen, highly flame retardant, thermoplastic, low smoke, low corrosivity, and low toxicity compound. It is designed for general purpose cable jacket applications. Used as jacket, it passes the IEEE-383/UL-1581/UL-1685 [Limited Smoke Test] vertical tray cable burn tests. Cable construction, of course, plays an important role in flame performance. It can be used as a jacket on cables operating at up to 90°C. This compound can replace PVC, low smoke PVC, and halogenated rubbers as a jacket with excellent fire safety (low smoke, low corrosivity, and low toxicity) and good property balance. This compound meets or exceeds many of industry jacket specifications such as UL-1277 Tray Cable. As a non-halogen flame retardant jacket, UNIGARD™ RE DFDE-1638 Natural is also designed to replace conventional non-halogen jacket products. It can withstand an extrusion temperature up to 180°C, and can be extruded with typical single-flight metering PE screws. Main Characteristics: - Highly flame retardant - Environmentally friendly ( lead free, halogen-free, sulfur/ antimony-free) - Low smoke, low corrosivity and low toxicity - Ease of extrusion and no special screw required - Good balance of toughness and flexibility