Description: A1084E is a styrene-butadiene copolymer in emulsion, stabilized with soap of fat acids. Amber milky liquid color with a light odor to styrene and free of odd matter. Applications: A1084E is used for the formulation of base gum for chewing gum to agglutinate the components of the same. It can be employed in the formulation of chewable gum or bomb chewing gum.

Description: A1215E is an aqueous dispersion of a carboxylated styrene-butadiene copolymer manufactured by polymerization in emulsion. Applications: A1215E is a very versatile product that allows its application for different uses where it also gives special characteristics in each one of them. It is recommended in those applications which would require high rigidity and tensile strength, as well as resistance to water, solvents, (textile finishing, facings, etc.) and automotive oil (filters). It also finds an excellent application in combination with thermo fixed resins where certain flexibility is given at the final finishing without lowering on its resistances.

Description: A1372R an aqueous dispersion of a carboxylated styrene-butadiene copolymer manufactured by polymerization in emulsion. Applications: A1372R is a product specially designed to be employed as backing in carpets and rugs with any type of fabric. It can be applied on canoe systems (simple or double) or by direct application. As a base to formulate backings, adhesives, textile pressings or in applications with no-fabrics. It can be applied in foam.

Description: A1490E an aqueous dispersion of a styrene-butadiene copolymer manufactured by polymerization in emulsion. Applications: A1490E is a product designed to be employed on saturations or recoverings to better rigidity and tensile strength in non-fabric products, cellulous and textiles.

Description: A1495E an aqueous dispersion of a styrene-butadiene copolymer manufactured by polymerization in emulsion. Applications: A1495E is a product designed to be employed on saturations or recoverings to improve rigidity and tensile strength in non-fabric products, cellulous and textiles.

Description: A1531E an aqueous dispersion of a carboxylated styrene-butadiene copolymer manufactured by polymerization in emulsion. Applications: A1531E is a product specially designed for the paper and cardboard coating where high adhesiveness is required to fix mineral loads.

Description: A1919NC is an aqueous dispersion of a carboxylated styrene-butadiene copolymer manufactured by polymerization in emulsion. Applications: A1919NC is a product specially designed to be employed as binding in the manufacturing of fabrics and no-fabrics and in the formulations of textile and adhesive backs.

Description: E1006 is a hot emulsion styrene-butadiene copolymer, polymerized using a fatty acid emulsifier and coagulated with salt-acid. It is a very light color product stabilized with a non-staining antioxidant. Applications: E1006 is recommended for light colored applications; for adhesives, tire white sidewalls, transport and transmission belts, sponge materials, sporting goods, flooring, colored shoe soles and heels.

Description: E1006CR is a crumb hot emulsion styrene-butadiene copolymer, polymerized using a fatty acid emulsifier and coagulated with salt-acid. It is a very light color product stabilized with a non-staining antioxidant, and presented as free flowing dusted crumb which eliminates the end for size reduction equipment. Between 7% and 12% of Calcium Carbonate is used as dusting agent. Applications: E1006CR is recommended for light colored applications; for adhesives, tire white sidewalls, transport and transmission belts, sponge materials, sporting goods, flooring, colored shoe soles and heels.

Description: E1009L is a hot emulsion styrene-butadiene copolymer, slightly cross-linked with divinylbenzene. It is polymerized using fatty acid as emulsifier, coagulated with salt acid and stabilized with a non-staining antioxidant. Applications: E1009L is a lower gel version of the e1009h it also reduces mill shrinkage and swelling in molding improving dimensional stability and outstanding surface texture of finished products. It is also widely used in sealants and adhesives giving good balance between adhesive and cohesive properties.

Description: E10101A is a cross-linked emulsion styrene-butadiene copolymer with divinyl benzene, using a mix of rosin and fatty acid as emulsifier. It is coagulated with Aluminum-acid and stabilized with a non-staining antioxidant. It is produced in acordance with good manufacturing practices and complies with FDA 21 CFR §175.300, §177.1210 and §178.3910 for use in food contact applications. Applications: E10101A gives excellent dimensional stability to compounds, reduces die swell and shrinkage in extruded products. It is also recommended for improving cohesive strength in adhesives and sealants which will be in contact with food or beverages.

Description: E10102 is a cold emulsion styrene-butadiene copolymer, polymerized with fatty acid and rosin acid emulsifier, coagulated by salt-acid system and stabilized with a non-staining antioxidant. Applications: El E10102 is widely used as raw material in tire and in various industrial products.

Description: E1011 is a hot emulsion styrene-butadiene copolymer using rosin acid as emulsifier and coagulated with salt- acid. It is very light color product stabilized with a non-staining antioxidant. Applications: E1011 gives excellent green tack and adhesive properties with good balance of mechanical strength. Is recommended for molded and extruded mechanical goods, adhesives, caulks and sealants.

Description: E1011CR is a crumb hot emulsion styrene-butadiene copolymer using rosin acid as emulsifier and coagulated with salt-acid. It is very light color product stabilized with a non-staining antioxidant. This rubber is produced as free flowing dusted crumb which eliminates the need for size reduction equipment. Between 4% and 12% of Calcium Carbonate is used as dusting agent. Applications: E1011CR gives excellent green tack and adhesive properties with good balance of mechanical strength. Is recommended for molded and extruded mechanical goods, adhesives, caulks and sealants.

Description: E1012 is a high viscosity hot emulsion styrene-butadiene copolymer, polymerized using a fatty acid emulsifier and coagulated with salt-acid. It is a very light color product stabilized with a non-staining antioxidant. Applications: E1012 is the high molecular weight version of e1006, particularly useful as a binder for fibrous materials and adhesives where increased cohesive strength is desired.

Description: E1012CR is a crumb high viscosity hot emulsion styrene butadiene copolymer, polymerized using fatty acid emulsifier and coagulated with salt-acid. It is very light color product stabilized with a non-staining antioxidant, and presented as free flowing dusted crumb which eliminates the end for size reduction equipment. Between 4% and 12% of Calcium Carbonate is used as dusting agent.

Description: E1013A is a styrene-butadiene copolymer, hot polymerized using a fatty acid soap. Previously to the alum-acid coagulation, a non-staining stabilizer is added in the manufacturing process. Applications: E1013A is suitable for adhesive applications it is particularly used for can-sealing compounds, tire liners, mechanical goods, including auto mounts, and household products.

Description: 10140 is a product manufactured by mixing a cold styrene-butadiene copolymer containing 5.5% bound styrene (80%) with high styrene resin latex (20%), coagulated by salt-acid system and stabilized with a non staining antioxidant. Applications: E10140 masterbach provides the user with an advantage through ease of processing and improved product quality, and it provides the stiffening effect to the final product. Is used in tires, footwear, sponges and other mechanical goods, etc.

Description: E1028A is a high styrene, hot emulsion styrene-butadiene copolymer using fatty acid as emulsifier and coagulated with salt-acid. It is stabilized with a non-staining antioxidant. The product does not contain nitrosamine promoters, and complies with FDA 21 CFR §175.300, §177.1210 and §178.3910 for use in food contact applications. Applications: E1028A is exceptionally light colored. It features high green strength, low air permeability and excellent flow properties, it is recommended for use in adhesives, sealants, tire liners, mechanical goods and household products.

Description: E1500A is a styrene-butadiene copolymer, cold polymerized using a rosin acid soap. Previously to the alum-acid coagulation, a non-staining stabilizer is added in the manufacturing process. The product does not contain nitrosamine promoters. Applications: E1500A is suitable for molded and extruded mechanical goods and sealants applications.

E1502 is a cold styrene-butadiene copolymer, used fatty and rosin acid as emulsifier, coagulated by salt-acid system and stabilized with a non-staining antioxidant. Applications: E1502 is widely used as raw material in tire, shoe sole and in various industrial products.

Description: E1502A is a styrene-butadiene copolymer, cold polymerized using fatty and rosin acid soap. Previously to the alum-acid coagulation, a non-staining stabilizer is added in the manufacturing process. The product does not contain nitrosamine promoters. Applications: E1502A is substitute of the natural rubber in wide range of compounds, offering advantages of light colour, uniformity and low levels of impurities. It´s good flow characteristics produce improvements in mixing and moulding behavior, it is used for food and pharmaceutical packaging and seals, baby bottle teats and health care, adhesives, chemical derivatives of rubbers. E1502A is manufactured to the highest standards but special requirements apply to certain sensitive applications such as food contact and pharmaceuticals. Reference should always be made to local legislation regulating these applications.

Description: E1502cr is a crumb styrene-butadiene copolymer, cold polymerized using fatty acid as emulsifier, coagulated by salt-acid system and stabilized with a non-staining antioxidant. This rubber is produced as free flowing dusted crumb wich eliminates the need for size reductions equipment. Between 4% and 12% of Calcium carbonate is used as dusting agent. Applications: E1502CR is widely used as raw material in tire, heels, shoe sole, in various industrial products and in the production of transaparent and light colored articles. As crumb it is used in the manufacturing of adhesives.

Description: E1509 is a cold styrene-butadiene copolymer, used fatty and rosin acid as emulsifier, coagulated by salt-acid system and stabilized with a non staining antioxidant. Applications: E1509 is used in shoe sole formulations, sponge, industrial products.

Description: E1509A is a copolymer styrene-butadiene, cold emulsion polymerized used fatty acid as emulsifier, coagulated by salt-acid system and stabilized with a non staining antioxidant. Applications: E1509A is recommended for mechanical goods and sealing applications.

E1712 is a copolymer styrene-butadiene cold emulsion polymerized used fatty acid as emulsifier, coagulated by salt-acid system and it is extended utilizing aromatic oil. Applications: E1712 is used in tire formulations and in a variety of industrial products due to its excellent adhesion and processing properties.

Description: E1732 is a copolymer styrene-butadiene, cold emulsion polymerized used fatty acid and rosin acid as emulsifier, coagulated by salt - acid system and it is extended utilizing naphthenic oil, thereby complying with the European directive 2005/69/EC. Applications: E1732 is used in the manufacture of tires and industrial products for its excellent processing properties.

Description: E1778 is a copolymer styrene-butadiene, cold emulsion polymerized used fatty acid as emulsifier, coagulated by salt-acid system and it is extended utilizing 37.5 parts of naphthenic oil. Applications: E1778 is used in the manufacture of tires and industrial products for its excellent processing properties.

Description: E1778R is a cold emulsion styrene-butadiene copolymer, polymerized using fatty acid as emulsifier, coagulated by salt-acid system and it is extended utilizing naphthenic oil and meets the European directive 2005/69/EC. Applications: E1778R is used in the manufacture of tires and industrial products for its excellent processing properties.

Description: E261 is a self-reinforcing emulsion rubber due to its high styrene content. The design of the elastomer allows for excellent processability during mixing and the special antioxidant used in its manufacture make it non-staining. Applications: E261 is used as a reinforcing agent that does not alter the final products specific gravity while increasing the hardness, rigidity, abrasive and tear resistance as well as improving the flexibility of vulcanized shoe-soles. This product can also be used as raw material in the manufacture of tires.

Europrene® Latice 084 BA is an aqueous anionic dispersion of a styrene-butadiene copolymer with low solid content obtained by emulsion polymerization using fatty acid soap as emulsifier. It does not contain any antioxidant. Sustainability Bio raw materials can be used in production processes together with traditional raw materials. In order to attribute sustainability characteristics to the final product, Versalis applies the Mass Balance approach, an acknowledged methodology that ensures that the sustainability characteristics of the alternative raw material, mixed with traditional naphtha, correspond to those of the final product. BA products are provided with a sustainability declaration indicating the amount of Bio Attributed component. They guarantee identical performance, quality and properties, as they do not differ in chemical composition and physical-mechanical performance from standard products. Key Features Europrene® Latice 084 BA is specially designed to provide an excellent adhesion between tyre cord fabric and the rubber compound. The product is compatible with vinyl pyridine latex. It displays excellent mechanical stability with low cream value and foaming. Main Applications Europrene® Latice 084 BA is mainly used for fabric impregnation and cord dipping (Polyamide, Polyester and Rayon) in combination with vinyl pyridine latex, for tyres, V-belts and conveyor belts.

Europrene® Latice 084 BCA is an aqueous anionic dispersion of a styrene-butadiene copolymer with low solid content obtained by emulsion polymerization using fatty acid soap as emulsifier. It does not contain any antioxidant. Sustainability Bio raw materials can be used in production processes together with traditional raw materials. In order to attribute sustainability characteristics to the final product, Versalis applies the Mass Balance approach, an acknowledged methodology that ensures that the sustainability characteristics of the alternative raw material, mixed with traditional naphtha, correspond to those of the final product. BCA products are provided with a sustainability declaration indicating the amount of Bio-Circular Attributed component. They guarantee identical performance, quality and properties, as they do not differ in chemical composition and physical-mechanical performance from standard products. Key Features Europrene® Latice 084 BCA is specially designed to provide an excellent adhesion between tyre cord fabric and the rubber compound. The product is compatible with vinyl pyridine latex. It displays excellent mechanical stability with low cream value and foaming. Main Applications Europrene® Latice 084 BCA is mainly used for fabric impregnation and cord dipping (Polyamide, Polyester and Rayon) in combination with vinyl pyridine latex, for tyres, V-belts and conveyor belts.

Europrene Latice 084 is an aqueous anionic dispersion of a styrene-butadiene copolymer with low solid content obtained by emulsion polymerisation using fatty acid soap as emulsifier. It does not contain any antioxidant. Key Features Europrene Latice 084 is specially designed to provide an excellent adhesion between tyre cord fabric and the rubber compound. The product is compatible with vinyl pyridine latex. It displays excellent mechanical stability with low cream value and foaming Main Applications Europrene Latice 084 is mainly used for fabric impregnation and cord dipping (Polyamide, Polyester and Rayon) in combination with vinyl pyridine latex, for tyres, V-belts and conveyor belts

Europrene® Latice 2430 BA is an aqueous anionic dispersion of a styrene-butadiene copolymer with high solid content obtained by emulsion polymerization using fatty acid soap as emulsifier. It does not contain any antioxidant. Sustainability Bio raw materials can be used in production processes together with traditional raw materials. In order to attribute sustainability characteristics to the final product, Versalis applies the Mass Balance approach, an acknowledged methodology that ensures that the sustainability characteristics of the alternative raw material, mixed with traditional naphtha, correspond to those of the final product. BA products are provided with a sustainability declaration indicating the amount of Bio Attributed component. They guarantee identical performance, quality and properties, as they do not differ in chemical composition and physical-mechanical performance from standard products. Key Features Europrene® Latice 2430 BA, after vulcanization, shows good mechanical properties as tensile strength and elongation at break. It can be blended and vulcanized in a similar manner to natural rubber latex. Foam made of Europrene® Latice 2430 BCA shows a high indentation hardness and a good resilience. Main Applications Europrene® Latice 2430 BA is used for high stiffness moulded foams (pillows, mattresses, topper) related to Dunlop, Talalay, gel/no gel processes. It can be used in gel and no-gel carpet foams.

Europrene® Latice 2430 BCA is an aqueous anionic dispersion of a styrene-butadiene copolymer with high solid content obtained by emulsion polymerization using fatty acid soap as emulsifier. It does not contain any antioxidant. Sustainability Bio raw materials can be used in production processes together with traditional raw materials. In order to attribute sustainability characteristics to the final product, Versalis applies the Mass Balance approach, an acknowledged methodology that ensures that the sustainability characteristics of the alternative raw material, mixed with traditional naphtha, correspond to those of the final product. BCA products are provided with a sustainability declaration indicating the amount of Bio-Circular Attributed component. They guarantee identical performance, quality and properties, as they do not differ in chemical composition and physical-mechanical performance from standard products. Key Features Europrene® Latice 2430 BCA, after vulcanization, shows good mechanical properties as tensile strength and elongation at break. It can be blended and vulcanized in a similar manner to natural rubber latex. Foam made of Europrene® Latice 2430 BCA shows a high indentation hardness and a good resilience. Main Applications Europrene® Latice 2430 BCA is used for high stiffness moulded foams (pillows, mattresses, topper) related to Dunlop, Talalay, gel/no gel processes. It can be used in gel and no-gel carpet foams.

Europrene Latice 2430 is an aqueous anionic dispersion of a styrene-butadiene copolymer with high solid content obtained by emulsion polymerisation using fatty acid soap as emulsifier. It does not contain any antioxidant. Key Features Europrene Latice 2430, after vulcanisation, shows good mechanical properties as tensile strength and elongation at break. Europrene Latice 2430 can be blended and vulcanised in a similar manner to natural rubber latex. Foam made of Europrene Latice 2430 shows a high indentation hardness and a good resilience Main Applications Europrene Latice 2430 is used for high stiffness moulded foams (pillows, mattresses, topper) related to Dunlop,Talalay, gel/no gel processes. It can be used in gel and no-gel carpet foams

Europrene® Latice 405 BA is an aqueous dispersion of a carboxylated styrene-butadiene copolymer obtained using synthetic anionic emulsifiers. It contains a non staining antioxidant Sustainability Bio raw materials can be used in production processes together with traditional raw materials. In order to attribute sustainability characteristics to the final product, Versalis applies the Mass Balance approach, an acknowledged methodology that ensures that the sustainability characteristics of the alternative raw material, mixed with traditional naphtha, correspond to those of the final product. BA products are provided with a sustainability declaration indicating the amount of Bio Attributed component. They guarantee identical performance, quality and properties, as they do not differ in chemical composition and physical-mechanical performance from standard products. Key Features Europrene® Latice 405 BA is completely ammonia free. It is a functional polymer with very soft handle. It is designed to provide good binding properties and excellent runnability on high speed impregnation lines Main Applications Europrene® Latice 405 BA is mainly used for paper saturation (masking tape) and adhesives where a very soft handle is required

Europrene® Latice 405 BCA is an aqueous dispersion of a carboxylated styrene-butadiene copolymer obtained using synthetic anionic emulsifiers. It contains a non staining antioxidant Sustainability Bio raw materials can be used in production processes together with traditional raw materials. In order to attribute sustainability characteristics to the final product, Versalis applies the Mass Balance approach, an acknowledged methodology that ensures that the sustainability characteristics of the alternative raw material, mixed with traditional naphtha, correspond to those of the final product. BCA products are provided with a sustainability declaration indicating the amount of Bio-Circular Attributed component. They guarantee identical performance, quality and properties, as they do not differ in chemical composition and physical-mechanical performance from standard products. Key Features Europrene® Latice 405 BCA is completely ammonia free. It is a functional polymer with very soft handle. It is designed to provide good binding properties and excellent runnability on high speed impregnation lines Main Applications Europrene® Latice 405 BCA is mainly used for paper saturation (masking tape) and adhesives where a very soft handle is required

Europrene Latice 405 is an aqueous dispersion of a carboxylated styrene-butadiene copolymer obtained using synthetic anionic emulsifiers. It contains a non staining antioxidant Key Features Europrene Latice 405 is completely ammonia free. It is a functional polymer with very soft handle. Europrene Latice 405 is designed to provide good binding properties and excellent runnability on high speed impregnation lines Main Applications Europrene Latice 405 is mainly used for paper saturation (masking tape) and adhesives where a very soft handle is required

Europrene® Latice 406 BA is an aqueous dispersion of a carboxylated styrene-butadiene copolymer obtained using synthetic anionic emulsifiers.It contains a non staining antioxidant Sustainability Bio raw materials can be used in production processes together with traditional raw materials. In order to attribute sustainability characteristics to the final product, Versalis applies the Mass Balance approach, an acknowledged methodology that ensures that the sustainability characteristics of the alternative raw material, mixed with traditional naphtha, correspond to those of the final product. BA products are provided with a sustainability declaration indicating the amount of Bio Attributed component. They guarantee identical performance, quality and properties, as they do not differ in chemical composition and physical-mechanical performance from standard products. Key Features Europrene® Latice 406 BA is completely ammonia free. It is a functional polymer with waterproof characteristics. It is designed to provide good binding properties and excellent runnability on high speed impregnation lines Main Applications Europrene® Latice 406 BA is mainly used for paper saturation (masking tape) when enhanced waterproofing properties are required.