Fluoropolímero (fluoropolímero): PTFE
Producto | Disponibilidad | Descripción del producto |
---|---|---|
Fluoroplex X 50 - GML | Latinoamérica | |
Fluorosint® 135 PTFE | África y Oriente Medio |
Fluorosint® 135 Polytetrafluoroethylene PTFE, is a material that was formulated to provide the lowest coefficient of friction and deformation for seals, bearings, and washer applications. This grade also possesses excellent strength, stiffness, and high pressure velocity capabilities. Additionally, Fluorosint® 135 PTFE exhibits high mechanical performance qualities at elevated temperatures, making this grade ideal for wear applications where extreme conditions are present.
|
Fluorosint® 207 PTFE | África y Oriente Medio |
Fluorosint® 207 Polytetrafluoroethylene PTFE is a Food Contact Compliant (FDA) grade of Fluorosint® with a unique combination of dimensional stability and creep resistance, exceptional sliding and wear properties, and outstanding chemical and hydrolysis resistance. Possessing the lowest coefficient of friction of all Fluorosint® materials, Fluorosint® 207 PTFE shapes excel in food, pharmaceutical, and chemical processing industries, especially for aggressive service bearing and bushing applications. It is also a preferred material for lower pressure seats and seals, where virgin PTFE fails and Food Contact Compliance may be required.
|
Fluorosint® 500 PTFE | África y Oriente Medio |
Fluorosint® 500 Polytetrafluoroethylene PTFE shapes possess a unique combination of stability and wear resistance, for sealing applications where tight dimensional control is required. With nine times greater resistance to deformation under load than unfilled PTFE, Fluorosint® 500 PTFE exhibits outstanding chemical and hydrolysis resistance, and excellent mechanical and tribological properties. Additionally, Fluorosint® 500 PTFE's coefficient of linear thermal expansion approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, which often eliminates fit and clearance problems for designers.
|
Fluorosint® HPV PTFE | África y Oriente Medio |
Fluorosint® HPV Polytetrafluoroethylene PTFE is an FDA Compliant, high performance, bearing grade of Fluorosint®. Optimized for high PV, and low "k" or wear factor, Fluorosint® HPV PTFE was developed specifically for bearing applications, where other PTFE formulations typically exhibit premature wear and cannot perform adequately. Ideal for food processing and pharmaceutical applications, Fluorosint® HPV PTFE's FDA Compliance gives equipment manufacturers new design options, due to this grade's superior load bearing and wear characteristics.
|
Fluorosint® MT-01 PTFE | África y Oriente Medio |
Fluorosint® MT-01 Polytetrafluoroethylene PTFE, is an extreme grade that was developed specifically for applications where the benefits of PTFE-based materials also require outstanding strength, stiffness, and stability. Often specified in seat, seal, and wear applications where extreme conditions are present, Fluorosint® MT-01 PTFE delivers superior mechanical performance at elevated temperatures.
|
Fluorosite 300 - GML | Latinoamérica | |
Fluorosite 600 - GML | Latinoamérica | |
Fluorosite 600 - GMP | Latinoamérica | |
Generic PTFE - Bronze | África y Oriente Medio |
This data represents typical values that have been calculated from all products classified as: Generic PTFE - Bronze
This information is provided for comparative purposes only.
|
Generic PTFE - Carbon Fiber | África y Oriente Medio |
This data represents typical values that have been calculated from all products classified as: Generic PTFE - Carbon Fiber
This information is provided for comparative purposes only.
|
Generic PTFE - Glass Fiber | África y Oriente Medio |
This data represents typical values that have been calculated from all products classified as: Generic PTFE - Glass Fiber
This information is provided for comparative purposes only.
|
Generic PTFE - Graphite Fiber | África y Oriente Medio |
This data represents typical values that have been calculated from all products classified as: Generic PTFE - Graphite Fiber
This information is provided for comparative purposes only.
|
Generic PTFE | África y Oriente Medio |
This data represents typical values that have been calculated from all products classified as: Generic PTFE
This information is provided for comparative purposes only.
|
Miflon® 2111B | Asia-Pacífico |
Dispersion PTFE Resin (PTFE)
Quality Standard: Q/321200GDH009-2011
Reference Standard: HG/T3028-1999
|
Miflon® 2122B | Asia-Pacífico |
Dispersion PTFE Resin (PTFE)
Quality Standard: Q/321200GDH009-2011
Reference Standard: HG/T3028-1999
|
Miflon® 2223B | Asia-Pacífico |
Dispersion PTFE Resin (PTFE)
Quality Standard: Q/321200GDH009-2011
Reference Standard: HG/T3028-1999
|
Miflon® 2333B | Asia-Pacífico |
Dispersion PTFE Resin (PTFE)
Quality Standard: Q/321200GDH009-2011
Reference Standard: HG/T3028-1999
|
Miflon® 2444B | Asia-Pacífico |
Dispersion PTFE Resin (PTFE)
Quality Standard: Q/321200GDH009-2011
Reference Standard: HG/T3028-1999
|
Miflon® 3021 | Asia-Pacífico |
Suspension PTFE Resin (Fine Particle Size) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard:HG/T2903-1997
Cleanness
- white surface, well-distribution, no impurity
|
Miflon® 3031 | Asia-Pacífico |
Suspension PTFE Resin (Fine Particle Size) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard:HG/T2903-1997
Cleanness
- white surface, well-distribution, no impurity
|
Miflon® 3112 | Asia-Pacífico |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Clean and white surface, well-distribution, no impurity
- D=57mm, no color difference for rod cross section
|
Miflon® 3113 | Asia-Pacífico |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Clean and white surface, well-distribution, no impurity
- D=57mm, no color difference for rod cross section
|
Miflon® 3114 | Asia-Pacífico |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Clean and white surface, well-distribution, no impurity
- D=57mm, no color difference for rod cross section
|
Miflon® 3121 | Asia-Pacífico |
Suspension PTFE Resin (Fine Particle Size) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard:HG/T2903-1997
Cleanness
- well-distribution, not more than 6 impurities and spots, among of it not more than 2 impurities of D=0.5mm-2mm, not more than 1 impurity of D=2mm-3mm
|
Miflon® 3122 | Asia-Pacífico |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Clean and white surface, well-distribution, no impurity
- D=57mm, no color difference for rod cross section
|
Miflon® 3123 | Asia-Pacífico |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Clean and white surface, well-distribution, no impurity
- D=57mm, no color difference for rod cross section
|
Miflon® 3124 | Asia-Pacífico |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Clean and white surface, well-distribution, no impurity
- D=57mm, no color difference for rod cross section
|
Miflon® 3131 | Asia-Pacífico |
Suspension PTFE Resin (Fine Particle Size) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard:HG/T2903-1997
Cleanness
- well-distribution, not more than 6 impurities and spots, among of it not more than 2 impurities of D=0.5mm-2mm, not more than 1 impurity of D=2mm-3mm
|
Miflon® 3212 | Asia-Pacífico |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Clean surface, well-distribution, no metal impurity, not more than 2 impurities (=1mm)
|
Miflon® 3213 | Asia-Pacífico |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Clean surface, well-distribution, no metal impurity, not more than 2 impurities (=1mm)
|
Miflon® 3214 | Asia-Pacífico |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Clean surface, well-distribution, no metal impurity, not more than 2 impurities (=1mm)
|
Miflon® 3221 | Asia-Pacífico |
Suspension PTFE Resin (Fine Particle Size) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard:HG/T2903-1997
Cleanness
- well-distribution, not more than 6 impurities and spots, among of it not more than 2 impurities of D=0.5mm-2mm, not more than 1 impurity of D=2mm-3mm
|
Miflon® 3222 | Asia-Pacífico |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Clean surface, well-distribution, no metal impurity, not more than 2 impurities (=1mm)
|
Miflon® 3223 | Asia-Pacífico |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Clean surface, well-distribution, no metal impurity, not more than 2 impurities (=1mm)
|
Miflon® 3224 | Asia-Pacífico |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Clean surface, well-distribution, no metal impurity, not more than 2 impurities (=1mm)
|
Miflon® 3231 | Asia-Pacífico |
Suspension PTFE Resin (Fine Particle Size) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard:HG/T2903-1997
Cleanness
- well-distribution, not more than 6 impurities and spots, among of it not more than 2 impurities of D=0.5mm-2mm, not more than 1 impurity of D=2mm-3mm
|
Miflon® 3313 | Asia-Pacífico |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Not clean and well-distribution, or have small metal impurities, more than 2 impurities (=1mm)
|
Miflon® 3321 | Asia-Pacífico |
Suspension PTFE Resin (Fine Particle Size) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard:HG/T2903-1997
Cleanness
- Not well-distribution, more than 6 impurities and spots
|
Miflon® 5111 | Asia-Pacífico |
PTFE Dispersion Concentrated Emulsion (PTFE)
Quality Standard:Q/321200GDH016-2012
|