Low melt viscosity, more suitable for injection molding. Z-1 PVDF as raw materials, the finished products has excellent mechanical strength and flexibility. It can not be eroded by acid, alkali, strong oxidant, halogens. Good durability to aliphatic hydrocarbons, aromatic hydrocarbons, alcohol, aldehyde etc. In the work of hydrochloric acid, nitric acid, sulfuric acid, dilute alkali liquor, dense alkali liquor(40%) and 100deg.C, which keep stable. Others, Z-1 PVDF finished products has the properties of gamma-Ray resistant, UV resistant, and stability in wide temperature range. Application: Be used in manufacturing PVDF valves, PVDF teller rosette ring, PVDF pall ring etc, semi-conductor industry, such as ultrapure water field etc.

Advantages: - FM 4910 listed - Service temperatures –22 to 284°F (–30 to 140°C) - Exceptional UPW and acid resistance - High gloss sheet surface - Welds to SIMONA® PVC with JSR weld rod Applications: - Chemical process tanks, components - Wetted parts - Fume hoods, ducting - DI water and acid etch systems - Scientific and laboratory equipment

DH-F22E-1 is one kind of pellet PVDF with medium MFR and suitable for making PVDF products through extrusion. Products made from DH-F22E-1 have a wide range of service temperature (-50°C to 150°C).

DH-F22E-2 is one kind of pellet PVDF with higher MFR and suitable for making PVDF pipes, sheets and rods through extrusion. Products made from DH-F22E-2 have a wide range of service temperature (-50°C to 150°C).

DH-F22I is one kind of pellet PVDF with lower melting viscosity and suitable for making various PVDF products through injection. Products made from DH-F22I have a wide range of service temperature (-50°C to 150°C)

DH-F22M is a kind of pellet PVDF; has high melting viscosity and suitable for making various PVDF products through compression molding. Products made from DH-F22M have a wide range of service temperature (-50°C to 150°C).

Solef® 1008 PVDF is a low viscosity homopolymer resin mainly used in injection molding.

Solef® 1008 PVDF is a low viscosity homopolymer resin mainly used in injection molding.

Solef® 1010/0HP1 PVDF is a medium viscosity homopolymer resin typically processed by extrusion.

Solef® 1015 PVDF homopolymer has very high viscosity, suitable for membrane manufacturing. It is available exclusively as powder.

Solef® 11008/0003 PVDF is a low viscosity flexible PVDF copolymer resin and is typically processed by extrusion or injection molding.

Solef® 11010 PVDF is a medium-viscosity flexible PVDF copolymer resin and is typically processed by extrusion.

Solef® 2042 Latex is an aqueous stabilized dispersion that contains approximately 25% by weight of a high molecular weight chemically modified PVDF copolymer (polyvinylidene fluoride) of medium crystallinity, that gives high adhesion to ceramics and separators in combination with low swelling, ideal for its usage in lithium batteries. Solef® 2042 Latex is useful for applications such as water-based impregnation of separators in Li-Ion batteries and energy storage devices. The main properties of Solef® 2042 Latex are: - Good adhesion to separator and to ceramics - Low swelling in electrolyte - Good wettability by electrolyte - Good flexibility - Good lamination to electrodes

Solef® 21510 PVDF copolymer has medium viscosity and is suitable for extrusion and for solution processing in lithium batteries applications.

Solef® 3108/0903 is a low viscosity PVDF resin, it is anti-static and typically processed by extrusion.

Solef® 31508/0003 PVDF copolymer is a low viscosity and very flexible grade for Wire&Cable applications.

Solef® 31508/0009 PVDF copolymer is a low viscosity and very flexible grade for Wire&Cable applications.

Solef® 31508 PVDF copolymer is a low viscosity and very flexible grade for Wire&Cable applications.

Solef® 41308/0001 PVDF is specifically developed for coextrusion.

Solef® 41308/1001 PVDF is specifically developed for powder coating applications.

Solef® 42308/0001 PVDF is specifically developed for coextrusion.

Solef® 460S/461S PVDF homopolymer has high melt viscosity and is typically processed by extrusion.

Solef® 5000S is a crystalline high molecular weight powder form of polyvinylidene fluoride (PVDF) specifically designed for solvent-based non-architectural coatings. It forms mechanically strong and tough films that have a broad useful temperature range. These films are highly resistant to most environmental conditions including gamma radiation and are essentially transparent to ultraviolet radiation. The weathering characteristics of Solef® 5000S coatings lead to excellent performance for the long term. SAFETY Solef® 5000S is stable at temperatures up to 600°F (316°C). When it is subjected to temperatures above 600°F (316°C) for extended periods of time, hydrogen fluoride (HF) begins to evolve, and at temperatures above 700°F (371°C) HF evolution becomes rapid. Solef® 5000S exhibits excellent flame resistance; however, in case of fire, HF and traces of potentially toxic fluorocarbons can be formed. HF is corrosive, causes burns on contact, and has an American Conference Governmental Industrial Hygienists (ACGIH) Threshold Limit Value (TLV-TWA) of 3 ppm (2.5 mg/m³) (1984). Thermal decomposition of Solef® 5000S to HF can also occur in a bake oven in the event that temperatures are not controlled properly. In the event of fire, use NIOSH approved self-contained breathing apparatus and skin protection to protect against volatile decomposition products. Solef® 5000S can be disposed of in an approved landfill, but should not be incinerated unless permitted by applicable law and provision is made for absorption of HF.

Solef® 5120 PVDF is a medium viscosity grade that gives improved adhesion ideal for its usage in lithium batteries.

Solef® 5130 PVDF is an ultra high viscosity grade that gives the best adhesion ideal for its usage in lithium batteries.

Solef® 5140 PVDF is an ultra high viscosity grade that gives superior adhesion and ultra high viscosity at reduced binder content, ideal for its use as binder in Lithium Ion Batteries.

Solef® 6008 PVDF homopolymer is a low-viscosity PVDF resin and is typically processed by injection molding.

Solef® 6010 PVDF homopolymer has medium viscosity and is typically processed by extrusion.

Solef® 6012 PVDF homopolymer is a high-viscosity PVDF resin and is typically processed by extrusion or compression molding.

Solef® 6020 PVDF homopolymer has very high viscosity for membranes and lithium batteries. It is available exclusively as powder.

Solef® 60512/0550 and Solef® 60512/0150 are PVDF grades compounded with PTFE for extrusion of anti-wear tapes.

Solef® 60512 PVDF copolymer has high viscosity of the melt and it is a grade for offshore piping.

Solef® 75040 PVDF copolymer is a ultra high molecular weight, chemically modified grade that combines excellent adhesion, good flexibility and easy solution process, which makes it ideal for usage in lithium batteries. Main features of Solef® 75040 PVDF are: - Good adhesion - Ultra high molecular weight - Good flexibility

Solef® 75130 PVDF copolymer is a ultra high molecular weight, chemically modified grade that combines excellent adhesion, good flexibility and easy solution process, which makes it ideal for usage in lithium batteries. Main features of Solef® 75130 PVDF are: - Good adhesion - Ultra high molecular weight - Soluble in acetone and ketones - Good flexibility

Carbon fibers reinforced - Injection

Solef® 9007 PVDF homopolymer has low viscosity and is used in film extrusion and injection molding.

Solef® 90615 PVDF copolymer has high viscosity of the melt and it is a grade for offshore piping.

Solef FPCH08/0001 is a low-viscosity PVDF resin typically processed by injection molding.

Solef FPCH09/0001 is a medium-low viscosity PVDF resin typically processed by injection molding.

Solef FPCH10/0001 is a medium-viscosity PVDF resin typically processed by extrusion.