Policarbonato (PC) by TER HELL PLASTIC GMBH
Producto | Disponibilidad | Descripción del producto |
---|---|---|
TEREZ ABS/PC Blend 1000 | Europa |
Heat resistant, high impact strength (notched) minor inclination of brittle fracture.
All kind of Injection moulding parts.
|
TEREZ ABS/PC Blend 2000 GF 10 | Europa |
Crystal clear, low viscosity with mould release and UV-stabilized.
For thinwalled injection moulding parts.
|
TEREZ ABS/PC Blend 2000 GF 20 | Europa |
Heat distortion resistant PC/ABS Blend with 20%GF reinforce.
For all kind of injection moulding parts with increased requirements of stiffness.
|
TEREZ ABS/PC Blend 2000 UV | Europa |
PC/ABS Blend with good heat resistant, high impact strength, low inclination to brittle failure and UV resistant.
For all kind of injection moulding parts.
|
TEREZ ABS/PC Blend 2000 | Europa |
Heat resistant, high impact strength, low inclination to brittle failure.
For all kind of injection moulding parts.
|
TEREZ ABS/PC Blend 3000 GF 20 | Europa |
PC/ABS Blend with 20% glass fiber.
For all kind of injection molding parts with high demand on heat resistance.
|
TEREZ ABS/PC Blend 3000 | Europa |
Heat resistant, high impact strength, low inclination to brittle failure.
For all kind of injection moulding parts.
|
TEREZ ABS/PC Blend 3301 GF 10 | Europa |
PC/ABS Blend with high heat resistance, 10% glass fiber reinforced.
For injection moulding parts.
|
TEREZ ABS/PC Blend 3301 GF20 | Europa |
PC/ABS Blend with high heat resistance, 20% glass fiber reinforced.
For injection moulding parts.
|
TEREZ ABS/PC Blend VN 24 | Europa |
Heat resistant PC/ABS Blend with high impact strength and low inclination to brittle failure.
For all kind of injection moulding parts.
|
TEREZ PC 1005 GF 10 FL | Europa |
Polycarbonate, medium flowability, 10% glassfiber reinforced and flame retardant.
For injection moulding parts with increased requirements of rigidity.
|
TEREZ PC 1005 | Europa |
Good flowability Polycarbonate with demoulding aid.
Suitable for production of different kinds of injection moulding parts.
|
TEREZ PC 1007 GF 10 | Europa |
Polycarbonate, 10% glassfiber reinforced with release agent. Medium to high flowability.
Suitable for manufacturing of stiffer, thinwalled injection moulding parts.
|
TEREZ PC 1007 GF 20 | Europa |
Polycarbonate, 20% glassfiber reinforced with release agent. Medium to high flowability.
Suitable for manufacturing of stiffer, thinwalled injection moulding parts.
|
TEREZ PC 1008 schwarz | Europa |
PC, good flowability, including release agent.
Especially suitable for manufacturing of thinwalled injection moulding parts.
|
TEREZ PC 2009 GF 15 | Europa |
Polycarbonate, 15 % glassfiber reinforced.
For all kind of moulding parts with increased demand of stiffness.
|
TEREZ PC 9001 UV | Europa |
Unreinforced Polycarbonate with high viscosity, UV-stabilizer and mold release agent.
For injection moulding parts with short flow distances.
|
TEREZ PC 9005 GF 10 FL HF LS | Europa |
Flame retardant Polycarbonate, medium flowability, 10% glassfibe reinforced, outstanding laser weldability
For injection moulding parts with increased demand of stiffness.
|
TEREZ PC 9005 GF 10 FL UV | Europa |
PC with 10 % glass fibre reinforcement as well as flame retardant and increased uv-resistance.
For all kind of injection moulded parts.
|
TEREZ PC 9005 GF 10 FL | Europa |
Polycarbonate with medium flowability as well as 10% glass fibre reinforcement and flame retardant.
For all kinds of injection moulding parts.
|
TEREZ PC 9005 GF 15 | Europa |
Medium flowability Polycarbonate with 15% glass fibre reinforcement.
For injection moulded parts with higher stiffness.
|
TEREZ PC 9005 GF 20 FL | Europa |
Polycarbonat medium flowability with 20% glass fiber and flame retardants.
For all kind of injection molding parts increased requirements of rigidity.
|
TEREZ PC 9005 GF 20 UV | Europa |
Polycarbonate with medium flowability, 20% glassfiber reinforced and additional UV-stabilized.
For injection moulding parts with increased demand of stiffness.
|
TEREZ PC 9005 GF 25 | Europa |
Polycarbonate medium flowability with 25% glass fiber.
For all kind of injection molding parts increased requirements of rigidity.
|
TEREZ PC 9005 GF 30 FL | Europa |
Polycarbonat medium flowability with 30% glass fiber and flame retardants.
For all kind of injection molding parts increased requirements of rigidity.
|
TEREZ PC 9005 L | Europa |
Crystal clear with mould release, food contact.
For all injection moulding parts.
|
TEREZ PC 9005 SZ | Europa |
Medium viscosity Polycarbonate with impact modification.
For injection moulded parts with increased demand on impact strength.
|
TEREZ PC 9005 UV | Europa |
Crystal clear with mould release and UV-stabilized.
For all injection moulding parts.
|
TEREZ PC 9007 L | Europa |
Crystal clear, low viscosity with mould release, food contact.
For thinwalled injection moulding parts.
|
TEREZ PC 9007 UV | Europa |
Crystal clear, low viscosity with mould release and UV-stabilized.
For thinwalled injection moulding parts.
|
TEREZ PC 9007 | Europa |
Crystal clear, low viscosity, with mould release.
For thinwall injection moulding parts.
|
TEREZ PC 9011 L | Europa |
Crystal clear, very low viscosity, mould release and food contact.
For thinwalled injection moulding parts.
|
TEREZ PC 9011 UV | Europa |
Crystal clear, low viscosity, mould release and UV-stabilized.
Especially for thinwalled injection moulding parts.
|
TEREZ PC 9011 | Europa |
Crystal clear Polycarbonate, very low viscosity, mould release.
For thinwalled injection moulding parts.
|
TEREZ PC X 9005 GF 5 | Europa |
Polycarbonate, medium flowability, 5% glass fibre reinforced.
For injection molded parts with increased demand of stiffness.
|
TEREZ PC/ASA Blend 1000 | Europa |
Standard PC/ASA Blend.
For all kind of injection moulding parts
|
TEREZ PC/ASA Blend 2002 | Europa |
PC/ASA Blend with high heat resistance and high notched impact strength
For all kind of injection moulding parts
|