ET509B is a black, high-density polyethylene produced with Sclairtech technology. It is well modified by melt blending to meet the requirements of globla standards and standards of customers' own. It is designed for use as a top-coat in 3-layer pipe coating systems with conventional grafted adhesive (Polyglue LE149V, LE200T, LE100A and LE851P etc). Base PE of ET509B has high physical properties originated from HDPE and blended resins improve ESCR, impact properties and processibility. Together with Polyglue grades for 3-layer PE, ET509B shows highly adjusted pipe coating system available for all pipe coating specification including DIN30670, CSA Z425.21-02, NFA 49-710.

GE200C is a polyethylene based compatibilizer containing anhydride functionality. It is available in pellet form and designed for use in conjunction with a polar material(PA, metal, inorganic matter, etc.) and a polyethylene. GE200C has high physical properties originated from polyethylene and shows excellent adhesion strength and processibility.

GE270C is a polyethylene based compatibilizer containing anhydride functionality. It is available inpellet form and designed for use in conjunction with a polar material (G/F, metal, Wood, inorganic matter, etc.) and a polyethylene. GE270C has high physical properties originated from polyethylene and shows excellent adhesion strength and processibility.

GE300C is a polyethylene based compatibilizer containing anhydride functionality. It is available in pellet form and designed for use in conjunction with a polar material (G/F, metal, Wood, inorganic matter, etc.)and a polyethylene. GE300C has high physical properties originated from polyethylene and shows excellent adhesion strength and processibility.

GE300N is a polyethylene based adhesive polymer containing anhydride functionality. It is available in pellet form and designed for use in co-extrudable aluminum composite panel manufacturing system. GE300N has high physical properties originated from LLDPE and shows excellent adhesion strength and processibility.

GE310PL is a polyethylene based adhesive polymer containing anhydride functionality. It is available in pellet form and designed for use in co-extrudable aluminum composite panel manufacturing system. GE310PL has high physical properties originated from LDPE and shows excellent adhesion strength and processibility.

GE400C is a polyethylene based compatibilizer containing anhydride functionality. It is available in pellet form and designed for use in conjunction with a polar material (G/F, metal, Wood, inorganic matter, etc.) and a polyethylene. GE400C has high physical properties originated from polyethylene and shows excellent adhesion strength and processibility.

GE460S is a polyethylene based adhesive polymer containing anhydride functionality. It is available in pellet form and designed for use in co-extrudable aluminum composite pipe & panel manufacturing system. GE460S has high physical properties originated from LLDPE and shows excellent adhesion strength and processibility. Together with XLPE, HDPE and PE-RT, GE460S exhibits superior bond strength with various aluminum substrate and shows high stability with long-term thermo-cyclic test.

HB520 is anhydride grafted polyethylene. It is useful in pellet form for use conventional extrusion and co- extrusion equipment designed to process polyethylene resins. Usually this materials is used in multi-layered barrier film, tube and sheet production. HB520 is developed for polyamide (Nylon) based barrier film. HB520 is suitable for multi-layer blown film. Based on HDPE, this adhesive is used for the tie layer between PE and barrier materials.

LE102T is a polyethylene based adhesive polymer containing anhydride functionality. It is available in pellet form and designed for use in co-extrudable aluminum composite pipe & panel manufacturing system. LE102T has high physical properties originated from LLDPE and shows excellent adhesion strength and processibility. Together with XLPE, HDPE and PE-RT, LE102T exhibits superior bond strength with various aluminum substrate and shows high stability with long-term thermo-cyclic test .

LE130A is anhydride grafted polyethylene. It is useful in pellet form for use conventional extrusion and co-extrusion equipment designed to process polyethylene resins. Usually this materials is used in multi-layered barrier film, tube and sheet production. LE130A is developed for ethylene vinyl alcohol (EVOH) or polyamide (Nylon) based barrier film. LE130A is suitable for multi-layer blown film. Based on LLDPE, this adhesive is used for the tie layer between PE and barrier materials.

LE149V is a polyethylene based adhesive polymer containing anhydride functionality. It is available in pellet form and designed for use in 3-layer pipe coating systems in conjunction with an epoxy primer and a thick polyethylene top-coat. LE149V has high physical properties originated from LLDPE and shows excellent processability during 3-layer pipe coating operation. Together with ET509B (Black compounded top coat) and commercially available epoxy primer, LE149V shows highly adjusted pipe coating system available for all pipe coating specification including DIN30670, CSA Z425.21-02, NFA 49-710.

LE200T is a polyethylene based adhesive polymer containing anhydride functionality. It is available in pellet form and designed for use in 3-layer pipe coating systems in conjunction with an epoxy primer and a thick polyethylene top-coat. LE200T has high physical properties originated from LLDPE and shows excellent processability during 3-layer pipe coating operation. Together with Yuclair ET509B (Black compounded top coat) and commercially available epoxy primer, LE200T shows highly adjusted pipe coating system available for all pipe coating specification including DIN30670, CSA Z425.21-02, NFA 49-710.

LE320V is anhydride grafted polyethylene. It is useful in pellet form for use conventional extrusion and co-extrusion equipment designed to process polyethylene resins. Usually this materials is used in multi-layered barrier film, tube and sheet production. LE320V is developed for ethylene vinyl alcohol (EVOH) or polyamide (Nylon) based barrier film. LE320V is suitable for multi-layer blown film. Based on LLDPE, this adhesive is used for the tie layer between PE and barrier materials.

LE851P is a polyethylene based adhesive polymer containing anhydride functionality. It is available in powder form and designed for use in 3-layer pipe coating systems in conjunction with an epoxy primer and a thick polyethylene top-coat. Together with ET509B (Black compounded top coat) and commercially available epoxy primer, LE851P shows highly adjusted pipe coating system available for all pipe coating specification including DIN30670, CSA Z245.21-02, NFA 49-710.

MP300JA is a polyethylene based adhesive polymer containing anhydride functionality. This grade is for powder coating of steel pipe, so it is powdered in disk type grinder. MP30JA has high physical properties originated from MDPE and shows excellent adhesion strength and processibility. * powder type, color of pellet : gray

DESCRIPTION AND USE - Silane based crosslinkable LLDPE according to "Sioplas" system - Good surface smoothness and high crosslinking density - High performance in processability and physical properties for wire and cable

DESCRIPTION AND USE - Silane based crosslinkable LLDPE according to "Sioplas" system - Good surface smoothness and high crosslinking density - High performance in processability and physical properties for wire and cable

DESCRIPTION AND USE - Silane based crosslinkable LLDPE according to "Sioplas" system - Good surface smoothness and high speed processability - High performance in physical properties for wire and cable

DESCRIPTION AND USE - Silane based crosslinkable HDPE according to "Sioplas" system - Good surface smoothness and high crosslinking density - High performance in processability, flexibility and physical properties for pipe

DESCRIPTION AND USE - Silane based crosslinkable HDPE according to "Sioplas" system - Good surface smoothness and high crosslinking density - High performance in processability and physical properties for pipe