AGILITY™ 1001 Performance LDPE es una resina de LDPE de alta presión específicamente diseñada para funcionar a un mayor índice de producción en líneas de film por soplado en mezclas con resinas de LLDPE, al tiempo que mantiene la estabilidad de las burbujas. Principales Características: - Resina de LDPE de procesamiento más rápido - Diseñado para índices de producción más altos en mezclas con resinas de LLDPE a una carga de 10-20% - La estructura molecular optimizada ofrece una óptica mejorada en mezclas con resinas de LLDPE Cumple con: - EU Nº 10/2011 - 21 CFR 177.1520 (c) 2.2 de la FDA de EE.UU. - HPFB de Canadá Sin Objeción Consulte las reglamentaciones para detalles completos.

AGILITY™ 1002 Performance LDPE es una resina LDPE de alta presión diseñada específicamente para utilizarse a tasas de productividad más altas en líneas de película soplada en mezclas con resinas LLDPE mientras mantiene la estabilidad de burbuja. Esta resina incluye 2000 ppm de aditivo antibloqueo para minimizar problemas de bloqueo. Principales Características: - Resina LDPE de procesamiento más veloz - Diseñada para tasas de productividad más altas en mezclas con resinas LLDPE a 10 – 20%. Su estructura molecular optimizada provee propiedades ópticas mejoradas en mezclas con resinas LLDPE Cumple con: - EU No 10/2011 - U.S.FDA 21 CFR 177.1520 (c) 2.2 - Canadian HPFB No Objection Consulte las regulaciones para detalles completos

AGILITY™ 1021 Performance LDPE es una resina LDPE de Alta Presión diseñada para procesarse a tasas de productividad más altas en líneas de película soplada en mezclas ricas de LLDPE manteniendo las propiedades ópticas Principales Características - Resina LDPE de más rápido procesamiento - Diseñada para tasas de productividad más altas en mezclas con resinas LLDPE en 20 – 30% - Su estructura molecular optimizada provee propiedades ópticas mejoradas en mezclas con resinas LLDPE Cumple con: - Europe Commission Regulation (EU) No 10/2011 - U.S. FDA, 21 CFR 177.1520(c)2.2 Consulte las regulaciones para detalles completos

AGILITY™ 1022 Performance LDPE es una resina LDPE de Alta Presión diseñada para procesarse a tasas de productividad más altas en líneas de película soplada en mezclas ricas de LLDPE manteniendo las propiedades ópticas Principales Características - Resina LDPE de más rápido procesamiento - Diseñada para tasas de productividad más altas en mezclas con resinas LLDPE en 20 – 30% - Su estructura molecular optimizada provee propiedades ópticas mejoradas en mezclas con resinas LLDPE Cumple con: - Europe Commission Regulation (EU) No 10/2011 - U.S. FDA, 21 CFR 177.1520(c)2.1 Consulte las regulaciones para detalles completos

AGILITY™ 1023 Performance LDPE is used in clarity packaging with good stiffness neat and in blends with LLDPE for industrial and food packaging applications. Main Characteristics: - High optics for sparkling packages - Good stiffness - Excellent processability Complies with: - EU No 10/2011 - U.S.FDA 21 CFR 177.1520 (c) 2.2 Consult the regulations for complete details

AGILITY™ 1200 Performance LDPE es una resina de baja densidad diseñada específicamente para operar a altas velocidades de linea en película soplada hecha con mezclas de LLDPE manteniendo estabilidad de burbuja. Tiene excelente encogimiento y buenas ópticas en mezclas con LLDPE.

AGILITY™ 1500 Performance LDPE es una resina de alta presión PEBD diseñada específicamente para tener una alta procesabilidad y buenas ópticas en mezclas con PELBD en películas sopladas o cast. Cumple con: - U.S. FDA 21 CFR 177.1520(c )2.2 - EU, No 10/2011 - Canadian HPFB No Objection Consulte las regulaciones para detalles completos.

AGILITY™ 2000 Performance LDPE is a low density polyethylene resin with a fractional melt index especially designed for shrink films and industrial and consumer blown films. This resin provides high stiffness and tear resistance with exceptional bubble stability, high levels of shrink, very good toughness and optical properties. Main Characteristics: - High output rates - Very high stiffness combined with good toughness - for potential downgauging - Very high tear resistance - High puncture resistance - Very high shrink

AGILITY™ 2001 Performance LDPE Resin de alta presión que ofrece transparencia combinada con alta tensión de contracción y resistencia Características principales: - Óptima LDPE para embalaje retráctil del sector retail - Excelente combinación de fuerza de contracción y ópticas superiores - Ofrece resistencia para aplicaciones exigentes Cumple con: - U.S. FDA 21 CFR 177.1520(c)2.2 - Consulte las regulaciones para obtener detalles completos

AGILITY™ AT 1604 Performance LDPE can be readily extruded using conventional blown film techniques utilizing melt temperatures between 170 and 230°C. AGILITY™ AT 1604 Performance LDPE has been designed to have excellent bubble stability and is therefore particularly suited to large wide width blown film application such as agricultural films Applications: - Heavy duty industrial film - Agricultural Film - Shrink Films AGILITY™ AT 1604 Performance LDPE should comply with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)2.2 Consult the regulations for complete details

AGILITY EC 7000 Performance LDPE es la siguiente generación en resinas de baja densidad para altas velocidades en recubrimientos por extrusión. Características principales: - Recomendada tanto para extrusiones a baja y alta temperatura - Estabilidad de cortina - Sellabilidad Cumple con: - Europe Commission Regulation (EU) No 10/2011 - U.S. FDA 21 CFR 177.1520 ( c )2.1 Consulte la hoja de regulaciones si requiere mayor detalle.

AGILITY EC 7000 R Performance LDPE is a next generation low density polyethylene resin for high speed extrusion coating Main Characteristics: - Recommended for extrusion at high and low temperatures - Robustness in melt drawing - Performance as sealant polymer Complies with: - Europe Commission Regulation (EU) No 10/2011 - U.S. FDA 21 CFR 177.1520 ( c )2.1 - ISCC PLUS certification for renewable-based plastics Consult the regulations for complete details.

AGILITY EC 7000 REN Performance LDPE is a next generation low density polyethylene resin for high speed extrusion coating Main Characteristics: - Recommended for extrusion at high and low temperatures - Robustness in melt drawing - Performance as sealant polymer Complies with: - Europe Commission Regulation (EU) No 10/2011 - U.S. FDA 21 CFR 177.1520 ( c )2.1 - U.S. DFA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

AGILITY™ EC 7030 Performance LDPE is a Low Density Polyethylene Resin designed for single layer and sealant application in extrusion coating. It is designed to run at maximum production line speed of 300 m/min, showing good neck-in results and draw ability to guarantee coating weights as low as 10 g/m2. At these conditions the processing performance of AGILITY™ EC 7030 Performance LDPE based on Dow's novel patented advanced tubular technology is similar to a traditional extrusion coating resin produced with an autoclave process and within the MFI range of 4 to 8 g/10min. Complies with: - Europe Commission Regulation (EU) No 10/2011 - U.S. FDA 21 CFR 177.1520 ( c )2.1 Consult the regulations for complete details.

AGILITY™ EC 7030 R Performance LDPE is a Low Density Polyethylene Resin designed for single layer and sealant application in extrusion coating. It is designed to run at maximum production line speed of 300 m/min, showing good neck-in results and draw ability to guarantee coating weights as low as 10 g/m2. At these conditions the processing performance of AGILITY™ EC 7030 R Performance LDPE based on Dow's novel patented advanced tubular technology is similar to a traditional extrusion coating resin produced with an autoclave process and within the MFI range of 4 to 8 g/10min. Complies with: - Europe Commission Regulation (EU) No 10/2011 - U.S. FDA 21 CFR 177.1520 ( c )2.1 - ISCC PLUS certification for renewable-based plastics Consult the regulations for complete details.

AGILITY™ EC 7030 REN Performance LDPE is a Low Density Polyethylene Resin designed for single layer and sealant application in extrusion coating. It is designed to run at maximum production line speed of 300 m/min, showing good neck-in results and draw ability to guarantee coating weights as low as 10 g/m2. At these conditions the processing performance of AGILITY™ EC 7030 REN Performance LDPE based on Dow's novel patented advanced tubular technology is similar to a traditional extrusion coating resin produced with an autoclave process and within the MFI range of 4 to 8 g/10min. Complies with: - Europe Commission Regulation (EU) No 10/2011 - U.S. FDA 21 CFR 177.1520 ( c )2.1 - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

AGILITY™ EC 7220 Performance LDPE is a high melt strength LDPE, designed for the foam industry. This resin enables the stable production of very low density foams. It can be used both in crosslinked and non-crosslinked products. Complies with: - Europe Commission Regulation (EU) No 10/2011. - U.S. FDA 21 CFR 177.1520(c)2.1. Consult the regulations for complete details.

APPEEL™ 1181 is a modified ethylene vinyl acetate resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide peelable seals over a broad temperature range to a number of container materials including PP, PET, PS and aluminum. It will also provide destruct seals to PVC and PE. APPEEL™ 1181 is available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene resins. Uses - Lidding Sealant Features - High clarity and low seal initiation temperature. Characteristics / Benefits - Contains amide slip agent - Contains antiblock agent

APPEEL™ 11D542 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide interfacial peel seals film to film, and occasionally for peel seal from HDPE, LLDPE, or low %EVA films. It is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins. Characteristics / Benefits - Cohesive type peel seal. Applications - Interfacial Peel Seal for pouches, Peelable Lidding film to other polyolefin substrates,

APPEEL™ 11D554 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide peelable seals to polypropylene, polystyrene and polystyrene foam and is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins. Uses - Lidding Sealant

APPEEL™ 2044 is a blown or cast film resin designed to be a sealing layer for lidding applications. It provides a peelable seal over a broad temperature range to a number of container materials including ABS, CPET, HDPE, PETG, PP, PS, and APET. It will provide stronger seals to HIPS, PVC, and HDPE. APPEEL™ 2044 is a modified ethylene vinyl acetate polymer available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene resins. Uses - Lidding Sealant Characteristics / Benefits - Contains amide slip agent - Contains antiblock agent

APPEEL™ 52004 is a modified ethylene acid terpolymer resin designed to function as a sealing layer for lidding applications, most commonly sealing to foamed polystyrene. It is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins. Uses - Lidding Sealant Applications - Good heat sealability and easy peelability to foamed PS. - Excellent direct foil adhesion without the use of primers. - APPEEL™ 52004 conforms to Code #20 of the Ministry of Health and Welfare Japan. Typical structures for this lidding would be: Paper/PE/Foil/APPEEL™ 52004 APPEEL™ 52004 is used as a heat seal layer in lidding material for foamed PS, especially used in the packaging of instant noodle cup. APPEEL™ 52004 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.

APPEEL™ 52009 is a modified ethylene acid terpolymer resin designed to function as a sealing layer for lidding applications, most commonly sealing to foamed polystyrene. It is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins. Uses - Lidding Sealant Applications - Good heat sealability and easy peelability to foamed PS. - Excellent direct foil adhesion without the use of primers. - APPEEL™ 52009 conforms to Code #20 of the Ministry of Health and Welfare Japan. Typical structures for this lidding would be: Paper/PE/Foil/APPEEL™ 52009 APPEEL™ 52009 is used as a heat seal layer in lidding material for foamed PS, especially used in the packaging of instant noodle cup. APPEEL™ 52009 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.

APPEEL™ 53007 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide strong peelable seals to polypropylene, and moderate seals to polystyrene, polyester, PVC and is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins. Uses - Lidding Sealant Applications - Low temperature heat seal. APPEEL™ 53007 offers low temperature heat seals with adequate seal strength at 90°C. - Heat sealability to various materials including PE, PP, PS, and Rigid PVC. APPEEL™ 53007 can also be sealed to paper, paperboard, woven fabrics, non-woven fabrics, wood and photographic papers. - APPEEL™ 53007 allows a peelable seal from most plastic materials excluding PE. - High transparency. - APPEEL™ 53007 conforms to Code #20 of the Ministry of Health and Welfare Japan. - APPEEL™ 53007 is used as a heat seal layer in lidding material for injection molded and vacuum molded plastic containers, especially HIPS and PS used in the packaging of yogurts, jams, butter and other food items. Typical structures for this lidding would be: OPP/PE/ APPEEL™ 53007 PET/PE/ APPEEL™ 53007 Over lacquer/Print/Foil/PE/ APPEEL™ 53007 Paper/PE/Foil/PE/ APPEEL™ 53007 APPEEL™ 53007 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.

APPEEL™ 53008 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide strong peelable seals to polypropylene, and moderate seals to polystyrene, polyester, PVC and is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins. Uses - Lidding Sealant Applications - Low temperature heat seal. APPEEL™ 53008 offers low temperature heat seals with adequate seal strength at 90C. - Heat sealability to various materials including PE, PP, PS, and Rigid PVC. APPEEL™ 53008 can also be sealed to paper, paperboard, woven fabrics, non-woven fabrics, wood and photographic papers. - APPEEL™ 53008 allows a peelable seal from most plastic materials excluding PE. - High transparency. - Boiling resistance. APPEEL™ 53008 endures boiling process, whose conditions are 85C / 30min. - APPEEL™ 53008 conforms to Code #20 of the Ministry of Health and Welfare Japan. - APPEEL™ 53008 is used as a heat seal layer in lidding material for injection molded and vacuum molded plastic containers, especially HIPS and PS used in the packaging of yogurts, jams, butter and other food items. Typical structures for this lidding would be: OPP/PE/ APPEEL™ 53008 PET/PE/ APPEEL™ 53008 Over lacquer/Print/Foil/PE/ APPEEL™ 53008 Paper/PE/Foil/PE/ APPEEL™ 53008 APPEEL™ 53008 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.

APPEEL™ 53009 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide strong peelable seals to polypropylene, and moderate seals to polystyrene, polyester, PVC and is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins. Uses - Lidding Sealant Applications - Low temperature heat seal. APPEEL™ 53009 offers low temperature heat seals with adequate seal strength at 90C. - Heat sealability to various materials including PE, PP, PS, and Rigid PVC. APPEEL™ 53009 can also be sealed to paper, paperboard, woven fabrics, non-woven fabrics, wood and photographic papers. - APPEEL™ 53009 allows a peelable seal from most plastic materials excluding PE. - High transparency. - Boiling resistance. APPEEL™ 53009 endures boiling process, whose conditions are 85C / 30min. - APPEEL™ 53009 conforms to Code #20 of the Ministry of Health and Welfare Japan. - APPEEL™ 53009 is used as a heat seal layer in lidding material for injection molded and vacuum molded plastic containers, especially HIPS and PS used in the packaging of yogurts, jams, butter and other food items. Typical structures for this lidding would be: OPP/PE/ APPEEL™ 53009 PET/PE/ APPEEL™ 53009 Over lacquer/Print/Foil/PE/ APPEEL™ 53009 Paper/PE/Foil/PE/ APPEEL™ 53009 APPEEL™ 53008 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.

APPEEL™ 53010 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide strong peelable seals to polypropylene, and moderate seals to polystyrene, polyester, PVC and is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins. Uses - Lidding Sealant Applications - Low temperature heat seal. APPEEL™ 53010 offers low temperature heat seals with adequate seal strength at 90C. - Heat sealability to various materials including PE, PP, PS, and Rigid PVC. APPEEL™ 53010 can also be sealed to paper, paperboard, woven fabrics, non-woven fabrics, wood and photographic papers. - APPEEL™ 53010 allows a peelable seal from most plastic materials excluding PE. - High transparency. - APPEEL™ 53010 conforms to Code #20 of the Ministry of Health and Welfare Japan. - APPEEL™ 53010 is used as a heat seal layer in lidding material for injection molded and vacuum molded plastic containers, especially HIPS and PS used in the packaging of yogurts, jams, butter and other food items. Typical structures for this lidding would be: OPP/PE/ APPEEL™ 53010 PET/PE/ APPEEL™ 53010 Over lacquer/Print/Foil/PE/ APPEEL™ 53010 Paper/PE/Foil/PE/ APPEEL™ 53010 APPEEL™ 53010 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.

APPEEL™ 53021 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide strong peelable seals to polypropylene, and moderate seals to polystyrene, polyester, PVC and is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins. Uses - Lidding Sealant Applications - Low temperature heat seal. APPEEL™ 53021 offers low temperature heat seals with adequate seal strength at 90oC. - Heat sealability to various materials including PE, PP, PS, and Rigid PVC. APPEEL™ 53021 can also be sealed to paper, paperboard, woven fabrics, non-woven fabrics, wood and photographic papers. - APPEEL™ 53021 allows a peelable seal from most plastic materials excluding PE. - High transparency. - APPEEL™ 53021 conforms to Code #20 of the Ministry of Health and Welfare Japan. - APPEEL™ 53021 is used as a heat seal layer in lidding material for injection molded and vacuum molded plastic containers, especially HIPS and PS used in the packaging of yogurts, jams, butter and other food items. Typical structures for this lidding would be: OPP/PE/ APPEEL™ 53021 PET/PE/ APPEEL™ 53021 Over lacquer/Print/Foil/PE/ APPEEL™ 53021 Paper/PE/Foil/PE/ APPEEL™ 53021 APPEEL™ 53021 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.

APPEEL™ 53070 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide strong peelable seals to polypropylene, and moderate seals to polystyrene, polyester, PVC and is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins. Uses - Lidding Sealant Features - *** Contains amides for slip / chill roll release, but more than in APPEEL™ 53071. Applications Contains amides for slip / chill roll release, but more than in APPEEL™ 53071. - Low temperature heat seal. APPEEL™ 53070 offers low temperature heat seals with adequate seal strength at 90C. - Heat sealability to various materials including PE, PP, PS, and Rigid PVC. APPEEL™ 53070 can also be sealed to paper, paperboard, woven fabrics, non-woven fabrics, wood and photographic papers. - APPEEL™ 53070 allows a peelable seal from most plastic materials excluding PE. - High transparency. - Boiling resistance. APPEEL™ 53070 endures boiling process, whose conditions are 90C / 30min. - APPEEL™ 53070 conforms to Code #20 of the Ministry of Health and Welfare Japan. - APPEEL™ 53070 is used as a heat seal layer in lidding material for injection molded and vacuum molded plastic containers, especially HIPS and PS used in the packaging of yogurts, jams, butter and other food items. Typical structures for this lidding would be: OPP/PE/ APPEEL™ 53070 PET/PE/ APPEEL™ 53070 Over lacquer/Print/Foil/PE/ APPEEL™ 53070 Paper/PE/Foil/PE/ APPEEL™ 53070 APPEEL™ 53070 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.

APPEEL™ 53071 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide strong peelable seals to polypropylene, and moderate seals to polystyrene, polyester, PVC and is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins. Uses - Lidding Sealant Features - *** Contains amides for slip / chill roll release, but less than in APPEEL™ 53070. Applications Contains amides for slip / chill roll release, but less than in APPEEL™ 53070. - Low temperature heat seal. APPEEL™ 53071 offers low temperature heat seals with adequate seal strength at 90C. - Heat sealability to various materials including PE, PP, PS, and Rigid PVC. APPEEL™ 53071 can also be sealed to paper, paperboard, woven fabrics, non-woven fabrics, wood and photographic papers. - APPEEL™ 53071 allows a peelable seal from most plastic materials excluding PE. - High transparency. - Boiling resistance. APPEEL™ 53071 endures boiling process, whose conditions are 90C / 30min. - APPEEL™ 53071 conforms to Code #20 of the Ministry of Health and Welfare Japan. - APPEEL™ 53071 is used as a heat seal layer in lidding material for injection molded and vacuum molded plastic containers, especially HIPS and PS used in the packaging of yogurts, jams, butter and other food items. Typical structures for this lidding would be: OPP/PE/ APPEEL™ 53071 PET/PE/ APPEEL™ 53071 Over lacquer/Print/Foil/PE/ APPEEL™ 53071 Paper/PE/Foil/PE/ APPEEL™ 53071 APPEEL™ 53071 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.

La resina de grado fibra ASPUN 6834 es un producto ideado para utilizarlo en máquinas de fabricación de fibras "spunbond" y fibra corta (configuración Mono y Bico). Se utiliza comercialmente en las áreas de productos no tejidos, ya que ofrece una suavidad y capacidad de decuelgue excelentes, unión térmica directa entre telas o entre tela y film de polietileno. La fibra corta tiene aplicación comercial en las fibras de baja adhesión como cubierta protectora bicomponente. Nota: La resina de grado fibra ASPUN 6834 debe cumplir la normativa 177.1520 de la FDA, así como la mayoría de las normas europeas de contacto con los alimentos, si se utiliza sin modificaciones y se procesa de acuerdo con las buenas prácticas de fabricación para aplicaciones de contacto con alimentos. Consulte a su oficina más próxima de Dow las declaraciones de cumplimiento de contacto con alimentos. El comprador es el responsable de averiguar si el uso cumple todas las normativas pertinentes. Aplicaciones: - Enseres domésticos - Textiles y fibras - Salud e higiene - Interiores de automóviles - Envases médicos

- Diseñados para procesarlos como hilo y fibras adhesivas - Cumple con U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Consulte la regulación para detalles completos ASPUN™ 6835A Resina Grado Fibra es un polietileno lineal de baja densidad (LLDPE). Una aplicación habitual es la fabricación de fibra corta.

ASPUN* 6840A Fiber Grade Resin is a linear low density polyethylene (LLDPE). A typical process is spunbond non-woven or staple fiber production - Is designed for processing into nonwoven fabrics and nonwoven fibers - Soft fabric with excellent drape - Low melting point for bonding Complies with: - US. FDA 21 CFR 177.1520(c)3.1A Consult the regulation for complete details.

Aspun™ 6850 Fiber Grade Resin is a linear low density polyethylene (LLDPE). Typical processes include spun-bond nonwoven and staple fiber production. Characteristics: Designed for processing into nonwoven fabrics and bonding fibers. Soft fabric with excellent drape. Low melting point for bonding. It complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - EU, No 10/2011 Consult the regulations for complete details. Notes: The composition of this product complies with the requirements for use in contact with food of the EU, No 10/2011. Contact a Dow Sales Office to obtain a detailed food contact compliance letter for this product. Such a letter covers the food contact status of this product in the various European Countries and in addition gives information about the imposed migration requirements.

ASPUN™ 6850A Fiber Grade Resin is a product suitable for use in staple fiber and spunbond production equipment. Commercial uses are in the non-woven areas offering excellent softness and drapability, low bonding temperature, direct thermal bonding of fabric to fabric or fabric to polyethylene film. Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - EU, No 10/2011 Consult the regulations for complete details. Notes: The composition of this product complies with the requirements for use in contact with food of the EU, No 10/2011. Contact a Dow Sales Office to obtain a detailed food contact compliance letter for this product. Such a letter covers the food contact status of this product in the various European Countries and in addition gives information about the imposed migration requirements.

ASPUN™ AT 2135 Fiber Grade Resin is a product suitable for use in staple fiber and spunbond production equipment. Commercial uses are in the non-woven areas offering excellent softness and drapability, low bonding temperature, direct thermal bonding of fabric to fabric or fabric to polyethylene film. Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - EU, No 10/2011 Consult the regulations for complete details. Notes: The composition of this product complies with the requirements for use in contact with food of the EU, No 10/2011. Contact a Dow Sales Office to obtain a detailed food contact compliance letter for this product. Such a letter covers the food contact status of this product in the various European Countries and in addition gives information about the imposed migration requirements.

- Para aplicaciones de packaging de alimentos - Ofrece resistencia, propiedades de sellado, propiedades ópticas y capacidad de procesamiento Cumple con: - U.S. FDA FCN 424 - HPFB de Canadá Sin Objeción (con Limitaciones) - EU, No 10/2011 - U.S. FDA-DMF Consulte las reglamentaciones para detalles completos.

- Para aplicaciones de embalaje y embalaje para alimentos - Ofrece alta resistencia a la perforación, excelente flexibilidad y resistencia al abuso - Excelentes propiedades de sello - Ofrece resistencia, propiedades de sello, propiedades ópticas y procesabilidad Cumple con: - U.S. FDA FCN 424 - U.S. FDA-DMF - U.S. USP - EU, No 10/2011 - CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) Consulte las regulaciones para detalles completos.

ATTANE™ 4207GC Ultra Low Density Ethylene/Octene Copolymer is a skin layer in cast film offers excellent low temperature hot tack properties combined with outstanding tear and impact strength. In stretch film applications, ATTANE™ 4207GC Ultra Low Density Ethylene/Octene Copolymer exhibits excellent stretchability as well as good physical and cling properties. ATTANE™ 4207GC Ultra Low Density Ethylene/Octene Copolymer can also be utilized in blown film coextrusion where it is combined with other resins having excellent bubble stability allowing ATTANE™ 4207GC Ultra Low Density Ethylene/Octene Copolymer to be used as a sealant in multilayer film structures. Applications: - Cling layer in cast stretch film. - Sealants in cast and blown films. Complies with: - EU, No 10/2011 - U.S. FDA FCN 424 Consult the regulations for complete details

- Ofrece adhesión mejorada en aplicaciones de adhesivo a una sola cara - Ofrece mejor resistencia y propiedades ópticas Cumple con: - HPFB de Canadá Sin Objeción (con Limitaciones) - EU, No 10/2011 - U.S. FDA CFR 176.170(c) - U.S. FDA FCN 424 Consulte las reglamentaciones para detalles completos.