TPI is a thermoplastic polyimide film that has excellent thermal, chemical, electrical and physical properties. With a continuous use temperature to 240°C (465°F), TPI films offer superior radiation resistance, excellent wear performance and resistance to chemicals.

Torlon® 4000T is a neat resin polyamide-imide (PAI) coarse powder designed for compounding with other polymers and specialty additives. It is the base resin utilized in all Torlon injection molded compounds. Its powder form enables designers to enhance custom compounds and specialty applications with the well-known properties of Torlon polyamide-imide, from its unstoppable performance under extreme conditions to excellent resistance against wear, creep and chemicals. A fine-particle powder version, Torlon® 4000TF, is also available, which is particularly well suited for compression molded parts. A water soluable analog of Torlon® 4000T is available as Torlon® AI-50. Torlon® 4000T has been shown to be useful in blends with polyphenylsulfone (PPSU), polyethersulfone (PES), polysulfone (PSU), polyetheretherketone (PEEK), high-temperature sulfone resins, self-reinforced polyphenylene, polybenzimidizole (PBI), polyimide (PI), polyetherimide (PEI), and polyphenylene sulfide (PPS). Besides blending with other polymers to enhance properties, Torlon® 4000T powder may be compounded with a wide variety of performance fillers, reinforcements, specialty additives and colorants to meet the desired need. The resultant compound may then be injection molded or extruded into film, shapes or fiber. In addition to molded components, Torlon® PAI powders are suitable for use in other high performance forms. For example, these powders are soluble in dipolar aprotic solvents such as N-methyl pyrrolidone (NMP), dimethylacetamide (DMAC), dimethylsulfoxide (DMSO) and dimethylformamide (DMF). Solutions of these systems can be sprayed into coatings, cast into films, spun into fibers and cast or spun into specialty membranes. High strength, high temperature capable adhesives can be also formulated from Torlon® PAI powders. Torlon® PAI powders may be incorporated into epoxy and other thermoset systems to provide additional strength, ductility and heat resistance. Torlon® 4000T powders are available in 3 viscosity grades, which are defined by the inherent viscosity (IV) ranges shown in the accompanying data. - Low viscosity: 4000T-LV - Medium viscosity: 4000T-MV - High viscosity: 4000T-HV

Torlon 4000TF是一种颗粒规整的细颗粒聚酰胺 - 酰亚胺（PAI）树脂，专用于与其它聚合物和特殊添加剂混合。是所有Torlon注塑成型化合物的基体树脂。粉末形式使设计者可以利用Torlon聚酰胺 - 酰亚胺公认的特性，为客户定制复合物和特种产品，使其在极端条件下具有无与伦比的性能，并具有优良的抗磨损、抗蠕变和化学品性能。 Torlon 4000TF是一种适用于模压成型部件的细粒粉末。最大粒径为150μm，95％的粒子小于75μm，绝大多数粒径介于30-40μm。该牌号的IV大于0.50 ，通常为0.50-0.65 。可供应粗颗粒粉末牌号Torlon 4000T，也可供应类似Torlon 4000T的水溶性牌号Torlon AI- 50 。 可通过添加Torlon 4000TF粉末使模压成型复合物的强度和耐磨损性能得到独特的提升。添加了Torlon 4000TF后，聚四氟乙烯（PTFE）和相关含氟聚合物复合材料显示出较高的强度、大大降低了蠕变、提高了耐磨损产品的性能。Torlon 4000TF用作其它各种模压成型部件如离合器、刹车片及其组件、熔融金属粉末和热塑性磁铁耐高温、高性能基质粘结剂。该精细粉末也可用于热喷工艺，如火焰喷涂和高速氧燃料（HVOF）喷涂技术。 除了成型部件外，Torlon PAI粉末也可以用于其它高性能形式。如，将这些粉末溶解在偶极非质子传递溶剂，如N-甲基吡咯烷酮（NMP） 、二甲基乙酰胺（ DMAC ） 、二甲基亚砜（DMSO）和二甲基甲酰胺（DMF）中，这些系统的溶液可以喷成涂层、制成流延薄膜、纺成纤维、流延或纺成特种膜。也可用Torlon PAI 粉末制成高强度、耐高温粘合剂。Torlon PAI粉末还可掺入环氧树脂和其它热固性系统中，以获得额外的强度、延展性和耐热性。

Torlon® 4200 is an unreinforced, unpigmented grade of polyamide-imide (PAI) resin for extrusion. This grade is designed for applications in the semiconductor industry which cannot tolerate particulates such as metals or inorganic particles migrating from the polymer. Torlon® 4200 has the best impact resistance and greatest elongation of all the Torlon® grades. Torlon® PAI has the highest strength and stiffness of any thermoplastic up to 275°C (525°F). It has outstanding resistance to wear, creep, and chemicals. - High Flow: Torlon® 4200 EXT

TORLON 4203L是未增强、润滑、着色级聚酰胺 - 酰亚胺（PAI）树脂。是Torlon 牌号中抗冲击性、拉伸性能最好的树脂。在所有能耐受高达275 ℃（ 525°F ）温度的热塑性树脂中，Torlon PAI具有最高的强度和刚度 。并具有优异的耐磨损性、抗蠕变性和耐化学性。 Torlon 4203L树脂具有出色的电气性能，因此是高性能部件如连接器、开关和继电器的理想选择。此外Torlon 4203L聚酰胺 - 酰亚胺可以用作诸如推力垫圈、花键衬、阀座、衬套、轴承、耐磨环、凸轮和其它需要在高温条件下保持强度和耐磨损的产品中。 -高流动性： Torlon 4203L-HF - 低流动性：Torlon 4203L-LF

Torlon 4275是耐磨等级的聚酰胺 - 酰亚胺（PAI） 。该牌号树脂的机械性能和耐磨损性取得了极好的平衡。具有高挠曲强度和抗压强度，在高流速和高压条件下，摩擦系数低，耐磨损性优异。 在所有能耐受275 ℃（ 525°F ）高温的热塑性树脂中，Torlon PAI具有最高的强度和刚度 。并具有优异的耐磨损性、抗蠕变性和耐化学性。 Torlon 4275 聚酰胺 - 酰亚胺树脂可用于止推垫圈、花键衬、阀座、衬套、轴承、耐磨环、凸轮和其它需要在高温条件下保持强度和耐磨损的产品中。

Torlon 4301是一种耐磨级聚酰胺 - 酰亚胺（PAI）树脂。机械性能和耐磨损性取得了良好的平衡。具有高挠曲强度和抗压强度，在高流速和高压条件下，摩擦系数低，耐磨损性优异。 在所有能耐受275 ℃（ 525°F ）高温的热塑性树脂中，Torlon PAI具有最高的强度和刚度 。并具有优异的耐磨损性、抗蠕变性和耐化学性。 Torlon 4301聚酰胺 - 酰亚胺可用于止推垫圈、花键衬、阀座、衬套、轴承、耐磨环、凸轮和其它需要在高温条件下保持强度和耐磨损的产品中。 注塑成型级： - 高流动：Torlon 4301 HF - 低流动： Torlon 4301 LF - 低流动小颗粒： Torlon 4301 LFSP 挤塑级： - 高流动： Torlon 4301-EXT - 更高流动：Torlon 4301-HQ

Torlon 4435聚酰胺 - 酰亚胺树脂专门开发用于在高压高速(PV)环境下耐摩擦性能非常低的非润滑产品。Torlon 4435不仅特别适用于不可能进行润滑或或不需要润滑的产品，还为已经失去润滑油的润滑系统提供了额外的安全余地。 材料具有从低温到高温范围的出众的抗弯强度和抗压刚度，可用于需要承重的产品。热膨胀系数低，具有在较宽的温度范围，满足紧公差要求的能力。由于其电耗散特性，该牌号也可考虑作防静电用途。 Torlon 4435具体可用于止推垫圈、密封环、滑动叶片、线轴、衬套、离合器辊和活塞。可以注射成型为复杂形状。 - 高流动性：Torlon 4435-HF

Torlon 4630是可注射成形的耐磨级聚酰胺酰亚胺（PAI）树脂，主要为非润滑产品提供卓越的抗磨抗性能。在275 ℃（ 525°F ）环境下，Torlon PAI所具有的强度和刚度超过所有热塑性塑料 ，并具有优异的耐磨损性、抗蠕变和化学品。 Torlon 4630聚酰胺 - 酰亚胺的潜在应用包括止推垫圈、密封圈、滑动叶片、线轴、衬套、离合器辊和活塞。

Torlon 4645 是可注射成形的耐磨损级聚酰胺 - 酰亚胺（PAI）树脂，主要为润滑磨损产品提供卓越的抗磨抗性能。 在275 ℃（ 525°F ）环境下，Torlon PAI所具有的强度和刚度超过所有热塑性塑料 ，并具有优异的耐磨损性、抗蠕变和化学品。 Torlon 4645 聚酰胺 - 酰亚胺的潜在应用包括止推垫圈、密封圈、滑动叶片、线轴、衬套、离合器辊和活塞。

Torlon® 5030 is a 30% glass-fiber reinforced grade of polyamide-imide (PAI) resin. It offers high strength and modulus and exceptional creep resistance. It has thermal expansion characteristics similar to aluminum and therefore excellent dimensional stability. Torlon® PAI has the highest strength and stiffness of any thermoplastic up to 275°C (525°F). It has outstanding resistance to wear, creep and chemicals. The mechanical properties of Torlon® 5030 resin make it a candidate for metal replacement in high temperature, high stress applications. In addition, it offers outstanding electrical properties, which makes it ideal for high performance parts such as connectors, switches and relays. - High Flow: Torlon® 5030-HF - Low Flow: Torlon® 5030-LF - Extrusion Grade: Torlon® 5030-E

Torlon 7130是30％碳纤增强级聚酰胺酰亚胺（PAI）树脂。具有高强度、高模量、卓越的耐蠕变性，以及良好的抗疲劳性。热膨胀特性近似于钢，因此具有优良的尺寸稳定性。 在所有能耐受275 ℃（ 525°F ）高温的热塑性树脂中，Torlon PAI具有最高的强度和刚度 。并具有优异的耐磨损性、抗蠕变性和耐化学性。 这种树脂可用于金属替代材料、滑动叶片、航空部件、叶轮、导流罩、活塞、外壳等部件。 具有注塑和挤出（E）级。

Torlon® AI-10 LM is a polyamide-imide (PAI) powder developed for the performance coatings industry. It is similar to Torlon® AI-10 in that it is produced using the same monomers and polymerization system. However, the manufacturing process has been optimized to reduce the amount of residual methylene dianiline (MDA) monomer to below the 1000 ppm action level specified in various hazard communication regulations. Torlon® AI-10 LM can be substituted for Torlon® AI-10, without any changes in formulation or process. Coatings based on the Torlon® AI-10 or AI-10 LM polymer yield durable, abrasion resistant, thermally stable films. The resin has superior resistance to organic solvents and a wide array of other commercial and industrial chemicals.

Torlon® AI-10 LS is a polyamide-imide (PAI) powder developed for the performance coatings industry. It is similar to Torlon® AI-10 in that it is produced using the same monomers and polymerization system. However, the manufacturing process has been optimized to reduce the amount of residual methylene dianiline (MDA) monomer to below the 1000 ppm action level specified in various hazard communication regulations and the residual N-methylpyrrolidone (NMP) is less than 1.5%. Torlon® AI-10 LS can be substituted for Torlon® AI-10, without any changes in formulation or process. Coatings based on the Torlon® AI-10 or AI-10 LS polymer yield durable, abrasion resistant, thermally stable films. The resin has superior resistance to organic solvents and a wide array of other commercial and industrial chemicals.

Torlon® AI-10 is a polyamideimide (PAI) powder developed for the performance coatings industry. As a liquid polymer solution, the resin is incorporated into the formulation of engineered coatings; often as the principal primer, binder, or high temperature adhesive component. As a powder, the resin is used in specialty composites and unique dry spray applications. Coatings based on the Torlon® AI-10 polymer yield durable, abrasion resistant, thermally stable films that do not exhibit unwanted thermoplastic properties. The resin has superior resistance to organic solvents and a wide array of other commercial and industrial chemicals. Outstanding tribological characteristics are afforded both by the resin as well as its unparalleled intra-coat adhesion to fluoropolymers. Coatings based on AI-10 polymer have been shown to be cost effective in electrical/electronic, high temperature decorative and corrosion preventative applications. Magnet wire insulation and protective coatings for printed circuit boards are some of the electrical uses. Industrial applications include primers and decorative topcoats for cookware, appliances and housewares. AI-10 polymer has been combined with fluoropolymers to produce high-performance, low-friction, corrosion-resistant coatings that provide protection to saw blades, gears, carburetor needles and lawn and garden tools. Torlon AI-10 is also used for high-strength, high-temperature adhesives. Excellent bond strengths have been observed with stainless steel, aluminum and titanium alloys and polyimide films. A special grade (called AI-10 LM) has been developed to reduce the amount of residual methylene dianline (MDA) monomer to below the 1000ppm level specified in hazard communication regulations. A water soluable analog of AI-10 (called Torlon® AI-30) is also available.

Torlon® AI-30 LM is a wet polymer granule developed for the performance coatings industry. This polyamide-imide precursor consists of roughly 35% polymer solids, 63% water and 2% NMP. The high acid number of the polymer backbone allows the formulation of aqueous solutions with the addition of an appropriate complexing amine. Aqueous-based solutions made with Torlon® AI-30 LM have inherently low VOCs, which helps end users meet stringent environmental regulations. Coatings based on the Torlon® AI-30 LM polymer yield durable, abrasion-resistant, thermally-stable films. The cured resin has superior resistance to organic solvents and a wide array of other commercial and industrial chemicals. Outstanding tribological characteristics are afforded both by the resin as well as its unparalleled intra-coat adhesion to fluoropolymers. Aqueous-based AI-30 LM polymer coatings offer a sustainable solution for electrical/electronic, high temperature decorative and corrosion preventative applications. In addition, magnet wire insulation and protective coatings for printed circuit boards may be converted from solvent-borne (NMP) polyamide-imide solutions. Industrial applications include primers and decorative topcoats for cookware, appliances and housewares. Aqueous AI-30 LM polymer solutions may be easily combined with aqueous fluoropolymer dispersions to produce sustainable, high-performance, low-friction, corrosion-resistant coatings that provide protection to industrial and automotive parts.

Torlon® AI-30 is a wet polymer granule developed for the performance coatings industry. This polyamide-imide precursor consists of roughly 35% polymer solids, 63% water and 2% NMP. The high acid number of the polymer backbone allows the formulation of aqueous solutions with the addition of an appropriate complexing amine. Aqueous-based solutions made with Torlon® AI-30 have inherently low VOCs, which helps end users meet stringent environmental regulations. Coatings based on the Torlon® AI-30 polymer yield durable, abrasion-resistant, thermally-stable films. The cured resin has superior resistance to organic solvents and a wide array of other commercial and industrial chemicals. Outstanding tribological characteristics are afforded both by the resin as well as its unparalleled intra-coat adhesion to fluoropolymers. Aqueous-based AI-30 polymer coatings offer a sustainable solution for electrical/electronic, high temperature decorative and corrosion preventative applications. In addition, magnet wire insulation and protective coatings for printed circuit boards may be converted from solvent-borne (NMP) polyamide-imide solutions. Industrial applications include primers and decorative topcoats for cookware, appliances and housewares. Aqueous AI-30 polymer solutions may be easily combined with aqueous fluoropolymer dispersions to produce sustainable, high-performance, low-friction, corrosion-resistant coatings that provide protection to industrial and automotive parts.

Torlon® AI-50 is a wet polymer granule developed for the performance coatings industry. This polyamide-imide precursor consists of roughly 35% polymer solids, 63% water and 2% NMP. The high acid number of the polymer backbone allows the formulation of aqueous solutions with the addition of an appropriate complexing amine. Aqueous-based solutions made with Torlon® AI-50 have inherently low VOCs, which helps end users meet stringent environmental regulations. Coatings based on the Torlon® AI-50 polymer yield durable, thermally-stable films. The cured resin has superior resistance to organic solvents and a wide array of other commercial and industrial chemicals. Outstanding tribological characteristics are afforded both by the resin as well as its unparalleled intra-coat adhesion to fluoropolymers. Aqueous-based AI-50 polymer coatings offer a sustainable solution for electrical/electronic, high temperature decorative and corrosion preventative applications. In addition, magnet wire insulation and protective coatings for printed circuit boards may be converted from solvent-borne (NMP) polyamide-imide solutions. Industrial applications include primers, adhesives, and wear-resistant protective coatings. Aqueous AI-50 polymer solutions may be easily combined with aqueous fluoropolymer dispersions to produce sustainable, high-performance, low-friction, corrosion-resistant coatings that provide protection to industrial and automotive parts.