RAMAPET A1 is a food grade PET copolymer amorphous resin.

RAMAPET FA is a food grade PET homopolymer resin that is specially designed for Film Grade packaging market.

RAMAPET H1 is a food grade PET resin specially designed for the hot fill bottle/sheet application.

RAMAPET N1 is a general purpose food grade PET copolymer resin that is suitable for a wide variety of containers. The resin offers good strength characteristics like dimensional stability and mechanical properties. Suitable for carbonated water, alcoholic beverages, pharmaceuticals, oils, agrochemicals, wide mouth containers and for APET sheet/film extrusion application. It is also suitable for heat set blow molding that are used for warm fill applications.

RAMAPET N180 is a general purpose, non-reheat PET resin for bottles, film, thermoformed containers and other transparent applications. It has good optical properties, the mechanical properties are representative for a PET resin with IV of 0.80. RAMAPET thermoplastic polyesters are condensation polymers produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process.

RAMAPET N1S is a General purpose food grade PET copolymer resin that is suitable for wide variety of containers including CSD container market. The resin offers good strength characteristics and good barrier properties on gas permeability. Suitable for Water, Alcoholic beverages, Pharmaceuticals, Oils, Agrochemicals, CSD containers and for APET sheet application. It is also suitable for heat set blow molding that are used for warm fill applications.

RAMAPET N2 is a food grade PET copolymer resin that is designed especially for water applications. The resin can be processed at low temperatures and allow faster cycle times on injection molding. The resin offers excellent clarity, color, good strength characteristics and a low acetaldehyde content to help minimize impact on aroma and flavor. Suitable for still water, edible oil and miscellaneous container applications.

RAMAPET N3 is a food grade PET copolymer resin that is specially designed for the water container market. The resin can be processed at lower RPM in the extruder and shorter cycle times to minimize the AA regeneration in injection molding. It offers a very low residual acetaldehyde content to help minimize impact on aroma and flavor. Suitable for still/flat water.

RAMAPET P184 is a slow crystallizing and non-reheat PET resin for thick walled applications that require optimal transparency, like refillable bottles, cosmetic bottles and jars and preforms for big containers like 5 Gallon. RAMAPET P184 has an IV of 0.84, has good optical properties and the mechanical properties are representative for a PET resin with IV of 0.84. RAMAPET thermoplastic polyesters are condensation polymers produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process.

RAMAPET R1 is a high intrinsic visosity food grade PET copolymer specially designed for the CSD container market. It offers enhanced reheat ability that improves machine efficiency during blow molding.

RAMAPET R180 is a general purpose polymer with "clear reheat" for the European market. Typical applications include carbonated soft drinks (CSD), carbonated and still water, household products, pharmaceutical, and general purpose containers. The product is also suitable for film & sheet applications. RAMAPET R180 contains a moderate level of a "clear" reheat additive which does not compromise the bottle appearance. The formulation gives a better reheat consistency than PET without reheat, allowing the blowing of more complicated shapes and an efficient blowing of the latest, light-weighted preform/bottle designs. The use of reheat additive provides significant energy saving up to 30% when reheating preforms.

RAMAPET S1 is a high intrinsic viscosity food grade PET coplymer resin that is designed for CSD container market. The resin offers enhanced barrier properties on gas permeability through the bottle surfaces. Suitable for CSD/Aerated water for tropical conditions. APET sheet, beer and agrochemical application. It is also suitable for heat set blow molding that is used for warm fill applications.

RAMAPET S2 is a specialty product. The resin is a high intrinsic viscosity PET copolymer. Suitable for Strapping, thick walled Preforms and for high impact strength containers.

RAMAPET S3 is a specialty product. The resin is a very high intrinsic viscosity PET copolymer. Suitable for strapping and also suggested for extrusion blow molding.

RAMAPET S4 is a specialty product. The resin is a very high intrinsic viscosity PET copolymer. Suitable for strapping.