Polipropileno (PP): POLYFORT®
Producto | Disponibilidad | Descripción del producto |
---|---|---|
POLYFORT® POLYFORT FPP 1007F | Norteamérica |
Polyfort® FPP 1007F is a 40% Talc-Filled, FDA approved Polypropylene Homopolymer
|
POLYFORT® POLYFORT FPP 1512E | Norteamérica |
POLYFORT® FPP 1512E is a 10% Talc-Filled, Low-Flow Polypropylene
|
POLYFORT® PP 1259 | Asia-Pacífico |
Polyfort PP 1259 is a medium impact polypropylene with easier molding characteristics for thinner parts and longer flow distances. Lower molding pressures and heats often reduce warpage and mold cycles. Approved for automotive use.
|
POLYFORT® PP 1277A-01 | Norteamérica |
Polyfort PP 1277A-01 is a low-flow, high-impact polypropylene for film, profile, tubing and coating, which require a material with the physical properties typical of those summarized below:
|
POLYFORT® PP 1329 | Norteamérica |
PP Medium Impact Unfilled
|
POLYFORT® PP 1329H-01 | Asia-Pacífico |
Polyfort PP 1329H-01 is a natural high flow, medium impact polypropylene that is suitable for molding thin parts with long mold flow distances. It permits reduction of injection temperatures and pressures and minimizes stress in molding.
|
POLYFORT® PP 1329HU | Norteamérica |
Polyfort® PP 1329HU is a high flow UV stabilized, medium impact copolymer polypropylene. It is suitable for applications which require a material with the following properties:
|
POLYFORT® PP 1407 | Norteamérica |
PP High Impact Unfilled
|
POLYFORT® PP 1579 | Asia-Pacífico |
Polyfort PP 1579 is an impact grade of polypropylene for use in parts which require good impact and good appearance in light weight injection molded parts. It meets requirements of Chrysler Corporation Specification MSDB 531F. It is available in current Chrysler Corporation colors in this extra high flow for thin parts or reduced mold cycles.
|
POLYFORT® PP 1692 | Asia-Pacífico |
Polyfort PP 1692 is an exceptional high impact copolymer with high flow for appearance parts. This material is available in Natural.
|
POLYFORT® PP 2173 | Norteamérica |
PP High Impact Unfilled
|
POLYFORT® PP 3052UX | Norteamérica |
PP High Flow Medium Impact Unfilled
|
POLYFORT® PP 3761U-3120 | Norteamérica |
Polyfort PP 3761U-3120 is an Unfilled Polypropylene Homopolymer
|
POLYFORT® PPC HI K1888 | África y Oriente Medio |
High impact PP copolymer, suitable for injection molding and extrusion
|
POLYFORT® PPC M5 RD LE | África y Oriente Medio |
5% mineral filled high impact, low emission and low density PP-Copolymer; good scratch resistance and UV-stability
|
POLYFORT® PPC MT20 SF | África y Oriente Medio |
20% talc filled high flow PP-Copolymer
|
POLYFORT® PPC MT30 HI SF FC | África y Oriente Medio |
30% talc filled high impact PP-Copolymer
|
POLYFORT® PPH GF20 H3 | África y Oriente Medio |
20% glass fibre reinforced PP Homopolymer chemically coupled, high heat stabilized
|
POLYFORT® PPH GF30 H3 SF1 | África y Oriente Medio |
30% glass fibre reinforced PP Homopolymer chemically coupled, high heat stabilized, super flow
|
POLYFORT® PPH K2303 NATURAL | África y Oriente Medio |
PP homopolymer
|
POLYFORT® PPH MT20 FC | África y Oriente Medio |
20% talc filled PP-Homopolymer, suitable for food contact applications
|
POLYFORT® PPH MT25 H-1737 | Norteamérica |
PPH MT25H-1737 is a 25% Talc-Filled Polypropylene Homopolymer
|
POLYFORT® PPH MT25 H-3120 | Norteamérica |
PPH MT25 H-3120 is a 25% Talc-Filled Polypropylene Homopolymer
|
POLYFORT® PPH MT40 LE H2 | África y Oriente Medio |
40% talc-filled PP-Homopolymercompound, low emission and low odour
|
POLYFORT® PPH MTF 2005 | África y Oriente Medio |
Glass fiber and mineral filled PP Homopolymer
|
POLYFORT® PPI MKF4025 MD | África y Oriente Medio |
40% glass fibre and mineral reinforced PP-Copolymer reduced warpage.
|
POLYFORT® PPI MT20 U LE H2 | África y Oriente Medio |
20% talc filled high impact and low emission PP-Copolymer with good UV-stability especially for automotive interior parts
|
POLYFORT® TPP3C20HSBK21 | Norteamérica |