HIGH PERFORMANCE SURFACING MATERIAL Greater impact resistance than high pressure laminates, melamine and thermofoils. Membrane pressing can eliminate unsightly seams and delamination problems. Wood core substrates that are membrane pressed or flat laminated with Boltaron® 4065MP sheet look new even after years of impacts, abrasion, harsh cleansers and the general abuse of commercial and institutional environments. CHARACTERISTICS - Tough, scratch resistant surface - Uniform surface quality - Formability in deep draws, sharp corners (Contours, detailed compound logos) - Economical thin gauges >0.028 in. (0.7 mm) - Izod impact strength of 18 ft-lb/in. (953 J/m) - Easily perforated USES - Flat and 3D laminated panels - Checkout counters - Kiosks - Store fixtures, displays - Logo and trademark panels - Medical surfaces - Commercial and recreational vehicle interiors - Institutional furniture

CHARACTERISTICS - Corrosion resistant - Industrial smooth finish on both sides - Conforms to the requirements of ASTM D1784 USES - Fume hoods, ducts, fume scrubbers - Acid etching machines - Machine parts, acid tanks and linings

FM 4910 CPVC CHARACTERISTICS - Meets FM 4910 - Suitable for thermoforming - Smooth, polished surface USES - Semiconductor cleanroom parts - Machined parts - Thermoformed parts

LOW SHRINKAGE, PLUS HIGH IMPACT RESISTANCE EVEN AT COLD TEMPERATURES This extruded proprietary thermoplastic alloy also offers a UL 94 V-0 flammability rating, and resists cold-cracking, abrasion and a wide variety of chemicals and cleaners. CHARACTERISTICS - Low shrinkage in thermoforming - Thermoformed orthotic and prosthetic components - Durability and dimensional stability in thermoforming - Highest available impact strength of materials in its class USES - Orthotic braces - Prostheses - Electrical enclosures in damage-prone, frigid areas

CLEAR CPVC FM 4910 CHARACTERISTICS - High impact resistance - Smooth, polished surface - Suitable for thermoforming - Conforms to ASTM D1784 USES - Semiconductor cleanroom equipment - Machined parts - Thermoformed parts

FAR AND UL RATED ULTRA-HIGH IMPACT SHEET CHARACTERISTICS - Uniform high quality appearance - Wall thickness integrity in deep draw forming - Full range of colors, widest range of textures - Low minimums - Lot-to-lot color consistency AIRCRAFT INTERIOR USES - Instrument panel housings - Class dividers, bulkhead laminates - Galley and lavatory components - Bull noses, gap covers, moldings - Sidewall and kick panels, seat parts ELECTRICAL USES - Medical - Housings - Equipment enclosures - Analytical equipment - Insulating panels FAR RATINGS FAR 25.853(a)(i) (Flammability) (Vertical burn, 60 sec) Pass FAR 25.853(a)(ii) (Flammability) (Vertical burn, 12 sec) Pass

FAR RATED LIGHTWEIGHT SHEET CHARACTERISTICS - Offers substantial weight savings - Uniform high quality appearance - Wall thickness integrity in deep draw forming - Full range of colors, widest range of textures - Low minimums - Lot-to-lot color consistency AIRCRAFT INTERIOR USES - Instrument panel housings - Class dividers, bulkhead laminates - Galley and lavatory components - Bull noses, gap covers, moldings - Sidewall and kick panels, seat parts ELECTRICAL USES - Equipment enclosures - Housings - Medical - Analytical equipment - Insulating panels FAR RATINGS FAR 25.853(a)(i) (Flammability) (Vertical burn, 60 sec) Pass FAR 25.853(a)(ii) (Flammability) (Vertical burn, 12 sec) Pass

ULTRA HIGH IMPACT SHEET CHARACTERISTICS - High impact at cold temperatures - Chemical resistance - Abrasion resistance USES - Equipment housings, gun holsters - Knife sheaths, store fixtures, push plates - Kick plates, and refrigeration equipment FAR RATINGS FAR 25.853 (Vertical burn, 60 sec) Pass FAR 25.853 (Vertical burn, 12 sec) Pass

IMPACT RESISTANT SHEET CHARACTERISTICS - Rigid and impact resistant - High flexural strength - Consistent thermoforming characterisitics USES - Electrical and electronic enlosures - Insulation panels, medical equipment - Electronic kiosk housings - Airport display housings - Aviation-compatible pet carriers FAR RATINGS FAR 25.853(a)(i) (Flammability) (Vertical burn, 60 sec) Pass FAR 25.853(a)(ii) (Flammability) (Vertical burn, 12 sec) Pass

LOW SHRINKAGE, PLUS HIGH IMPACT RESISTANCE EVEN AT COLD TEMPERATURES This extruded proprietary thermoplastic alloy also offers a UL 94 V-0 flammability rating, and resists cold-cracking, abrasion and a wide variety of chemicals and cleaners. CHARACTERISTICS - Low shrinkage in thermoforming - Thermoformed orthotic and prosthetic components - Durability and dimensional stability in thermoforming - Highest available impact strength of materials in its class USES - Orthotic braces - Prostheses - Electrical enclosures in damage-prone, frigid areas

HIGH TEMPERATURE RESISTANT SHEET FOR MEDICAL APPLICATIONS CHARACTERISTICS - High impact strength - Durability - Scratch resistant - Can withstand harsh cleaners and chemicals - UL 94 V-0 compliant - Excellent thermoformability - Pass ball pressure test USES - Medical device enclosures - Hospital bed components - Diagnostic imaging - In vitro diagnostic covers - Lavatory components - Thermoformed electronic device enclosures

UV RESISTANT HIGH GLOSS SHEET FOR THERMOFORMING CHARACTERISTICS - High gloss acrylic film - Excellent UV resistance - High impact - Abrasion and chemical resistance - Thermoformable USES - Equipment housings - Medical products - Kiosk housings - Radomes

FAR RATED HIGH IMPACT RESISTANT DECORATIVE DESIGN SHEET CHARACTERISTICS - Wide range of decorative patterns includes: Carbon Fiber, Simulated Fabrics, Woodgrains, Abstracts - FAR 25.853(a) compliance - Excellent durability and impact strength - Uniform high quality appearance and lot-to-lot color consistency - Wall thickness integrity in deep draw forming USES - Seat parts, arm rests, tray tables - Passenger service units (PSUs) - Video monitor shrouds, moldings - Instrument panel housings - Class dividers, bulkhead laminates - Galley and lavatory components FAR RATINGS FAR 25.853(a)(i) (Flammability) (Vertical burn, 60 sec) Pass FAR 25.853(a)(ii) (Flammability) (Vertical burn, 12 sec) Pass

LOW SMOKE AND FLAME RELATED SHEET FOR AIRCRAFT AND MASS TRANSIT INTERIORS CHARACTERISTICS - Meets aircraft and mass transit low smoke and flame criteria - Impact resistant - Uniform surface appearance - Wall thickness integrity in deep draw forming - Infinite range of colors - Industry’s widest range of textures - Lot-to-lot color consistency USES - Instrument panel housings - Class dividers, Bulkhead laminates - Galley and lavatory components - Bull noses, gap covers, moldings - Sidewall, Kick panels, Air ducts - Window reveals, Seat parts - Tray tables, Light housings - Passenger Service Units (PSUs) - Light housings, Life vest shrouds - Video monitor shrouds FAR RATINGS FAR 25.853 (a) App. F, Part I,(a),1,(i) (Flammability) (Vertical Burn, 60 sec) Pass FAR 25.853 (a) App. F, Part I,(a),1,(ii) (Flammability) (Vertical Burn, 12 sec) Pass FAR 25.853 (d) App. F, Part V (Smoke Density) Pass

FAR-RATED HIGH IMPACT RESISTANT SHEET FOR AIRCRAFT INTERIORS Boltaron® 6800E sheet, extruded from a proprietary thermoplastic alloy, meets stringent FAR 25.850(a) flammability requirements for aircraft interiors. It also satisfies UL 94 V0 flame test criteria. Its resistance to impacts, stains and cleaning chemicals enhances service life of interior components, and in thermoforming, the sheet maintains uniform wall thickness even in deep draws. (Note: For aircraft parts larger than 1 sq ft (305 sq mm) requiring an OSU 65/65 rating, please specify Boltaron® 9815E sheet) CHARACTERISTICS - Full range of colors and textures - Meets FAR 25.853(a) and UL 94 V-0 flame test criteria - Maintains wall thickness in deep draw forming - Impact and stain resistant - Lot-to-lot consistency USES - Instrument panel housings, tray tables - Class dividers, bulkhead laminates - Galley and lavatory components - Bull noses, gap covers and moldings - Sidewall and kick panels, window reveals - Seat parts (backs and arm rests) - Passenger service units (PSUs) - Video monitor shrouds, and air ducts - Light housings, life vest shrouds FAR RATINGS FAR 25.853(a)(i) (Flammability) (Vertical burn, 60 sec) Pass FAR 25.853(a)(ii) (Flammability) (Vertical burn, 12 sec) Pass

SOFT TOUCH, FLEXIBLE FIRE RATED SHEET QUALITY CHARACTERISTICS Soft touch surface Uniform high quality appearance Wall thickness integrity in deep draw forming Full range of colors, widest range of textures Lot-to-lot color consistency USES Bull noses, gap covers, moldings, sidewall and kick panels, seat parts, arm rests, components that require a soft touch for passenger comfort FAR RATINGS FAR 25.853(a)(i) (Flammability)(Vertical burn, 60 sec) Pass FAR 25.853(a)(ii) (Flammability)(Vertical burn, 60 sec) Pass

FAR RATED HIGH LIGHT BLOCKING THIN GAUGE SHEET CHARACTERISTICS - Maximum light-blocking in thin gauges - Meets FAR flame test criteria - Single and double color construction - Tough, durable in use - 500 lb minimum USES - Aircraft window shades FAR RATINGS FAR 25.853(a)(i) (Flammability) (Vertical burn, 60 sec) Pass FAR 25.853(a)(ii) (Flammability) (Vertical burn, 12 sec) Pass FAR 25.853(d)(Part IV) (OSU Heat Release) (Peak - HRR, kW/m <65) (2 Min - HRR, kW min/m 2 <65) FAR 25.853(d)(Part V) (NBS Smoke) (Ds Max <200)

THERMOFORMABLE FAR-RATED SHEET WITH EMBEDDED DESIGN CHARACTERISTICS - Wide range of decorative patterns include simulated fabrics, woodgrains, abstracts - Outstanding impact resistance - Uniform high quality appearance - Wall thickness integrity in deep draw forming - Custom textures and colors at low minimums - Lot-to-lot color consistency USES - Instrument panel housings, air ducts - Class dividers, bulkhead laminates - Galley and lavatory components - Bull noses, gap covers and moldings - Sidewal, kick panels and tray tables - Seat parts, backs and arm rests - Passenger service units (PSUs) FAR RATINGS FAR 25.853(a)(i) (Flammability) (Vertical burn, 60 sec) Pass FAR 25.853(a)(ii) (Flammability) (Vertical burn, 12 sec) Pass FAR 25.853(d)(Part IV) (OSU Heat Release) (Peak - HRR, kW/m 2 <65) (2 Min - HRR, kW min/m 2 <65) FAR 25.853(d)(Part V) (NBS Smoke) (Ds Max <200)

FAR RATED HIGH IMPACT SHEET FOR AIRCRAFT INTERIORS CHARACTERISTICS - Outstanding impact resistance - Uniform high quality appearance - Wall thickness integrity in deep draw forming - Full range of colors, finishes - Lot-to-lot color consistency USES - Instrument panel housings and air ducts - Class dividers and bulkhead laminates - Galley and lavatory components - Bull noses, gap covers and moldings - Aircraft seating components FAR RATINGS FAR 25.853(a)(i) (Flammability) (Vertical burn, 60 sec) Pass FAR 25.853(a)(ii) (Flammability) (Vertical burn, 12 sec) Pass FAR 25.853(d)(Part IV) (OSU Heat Release) (Peak - HRR, kW/m 2 <65) (2 Min - HRR, kW min/m 2 <65) FAR 25.853(d)(Part V) (NBS Smoke) (Ds Max <200)

THERMOFORMABLE FAR-RATED SHEET WITH FILM CHARACTERISTICS - Can be laminated to flat or three-dimensional metal, FRP or thermoplastic substrates - Uniform high quality appearance - Full color range - Lot-to-lot color consistency USES - Class dividers and bulkhead laminates - Galley and lavatory components - Bull noses, gap covers and moldings - Light housings, video monitor shrouds - passenger service units (PSUs) FAR RATINGS FAR 25.853(a)(i) (Flammability) (Vertical burn, 60 sec) Pass FAR 25.853(a)(ii) (Flammability) (Vertical burn, 12 sec) Pass FAR 25.853(d)(Part IV) (OSU Heat Release) (Peak - HRR, kW/m 2 <65) (2 Min - HRR, kW min/m 2 <65) FAR 25.853(d)(Part V) (NBS Smoke) (Ds Max <200)

THERMOFORMABLE FAR-RATED SHEET WITH METALLIC FINISH CHARACTERISTICS - Deeper, richer, more durable metallic finish - Outstanding impact and scratch resistance - Uniform high quality appearance - Wall thickness integrity in deep draw forming - Custom textures and colors - Lot-to-lot texture and color consistency USES - Instrument panel housings and air ducts - Class dividers and bulkhead laminates - Galley and lavatory components - Bull noses, gap covers and moldings - Sidewall, kick panels and window reveals - Seat parts, backs, arm rests, tray tables FAR RATINGS FAR 25.853(a)(i) (Flammability) (Vertical burn, 60 sec) Pass FAR 25.853(a)(ii) (Flammability) (Vertical burn, 12 sec) Pass FAR 25.853(d)(Part IV) (OSU Heat Release) (Peak - HRR, kW/m 2 <65) (2 Min - HRR, kW min/m 2 <65) FAR 25.853(d)(Part V) (NBS Smoke) (Ds Max <200)

FAR RATED HIGH IMPACT SHEET FOR AIRCRAFT INTERIORS CHARACTERISTICS - Provides outstanding durability and long service life - Consistent, uniform high quality appearance - Maintains wall thickness integrity in deep draw forming - Available in a full range of colors. finishes - Reliable lot-to-lot color consistency - Customizable in theindustry's widest collection of textures - Safe to use UV-C disinfection USES - Aircraft interior seat parts - Video monitor shrouds - Galley and lavatory components - Bull noses, gap covers and moldings - Class dividers and bulkhead laminates - Tray tables FAR RATINGS FAR 25.853(a)(i) (Flammability) (Vertical burn, 60 sec) Pass FAR 25.853(a)(ii) (Flammability) (Vertical burn, 12 sec) Pass FAR 25.853(d)(Part IV) (OSU Heat Release) (Peak - HRR, kW/m 2 <65) (2 Min - HRR, kW min/m 2 <65) FAR 25.853(d)(Part V) (NBS Smoke) (Ds Max <200)

THERMOFORMABLE FAR-RATED SHEET FOR AIRCRAFT INTERIORS CHARACTERISTICS - Outstanding impact resistance - Unique texture options, including carbon fiber, leather, and more - Uniform high quality appearance - Wall thickness integrity in deep draw forming - Lot-to-lot color consistency USES - Instrument panel housings, air ducts - Class dividers, bulkhead laminates - Galley and lavatory components - Bull noses, gap covers and moldings - Passenger service units (PSUs) FAR RATINGS FAR 25.853(a)(i) (Flammability) (Vertical burn, 60 sec) Pass FAR 25.853(a)(ii) (Flammability) (Vertical burn, 12 sec) Pass FAR 25.853(d)(Part IV) (OSU Heat Release) (Peak - HRR, kW/m 2 <65) (2 Min - HRR, kW min/m 2 <65) FAR 25.853(d)(Part V) (NBS Smoke) (Ds Max <200)

THERMOFORMABLE FAR-RATED SHEET FOR AIRCRAFT INTERIORS CHARACTERISTICS - Has a deep, rich pearlescent effect - Maintains wall thickness integrity in deep draw thermoforming - Can be color matched to any pearlescent hue - Industry’s widest range of pressed and extruded textures - Low minimum order requirements USES - Ideal for 2D or 3D aircraft interior or parts - Seat backs and tray tables - Decorative trim and finish FAR RATINGS FAR 25.853(a)(i) (Flammability) (Vertical burn, 60 sec) Pass FAR 25.853(a)(ii) (Flammability) (Vertical burn, 12 sec) Pass FAR 25.853(d)(Part IV) (OSU Heat Release) (Peak - HRR, kW/m 2 <65) (2 Min - HRR, kW min/m 2 <65) FAR 25.853(d)(Part V) (NBS Smoke) (Ds Max <200)

LOW SMOKE AND HEAT RELEASE SHEET FOR AIRCRAFT INTERIORS CHARACTERISTICS - 150 smoke generation - Lowest rate of heat release: 55/55 - Uniform high quality appearance - Wall thickness integrity in deep draw forming - Full range of colors, widest range of textures - Lot-to-lot color consistency USES - Instrument panel housings, class dividers - Bulkhead laminates, bull noses, gap covers - Galley and lavatory components, light housings - Moldings, sidewall and kick panels, air ducts - Window reveals, seat parts, backs, arm rests - Tray tables, passenger service units (PSUs) FAR RATINGS FAR 25.853(a)(i) (Flammability) (Vertical Burn, 60 sec) Pass FAR 25.853(a)(ii) (Flammability) (Vertical Burn, 12 sec) Pass FAR 25.853(d)(Part IV) (OSU Heat Release) (Peak - HRR, kW/m 2 <55) (2 Min - HRR, kW min/m 2 <55) FAR 25.853(d)(Part V) (NBS Smoke) (Ds Max <150)

DURABLE CLASS 1/A INTERIOR WALLCOVERING CHARACTERISTICS - Meets class 1-A to 0.060 in. (1.52 mm) - Durable, high impact resistance - Abrasion, stain and chemical resistant - Easy to clean, maintain - Uniform surface appearance USES - Protective wallcovering - Pre-laminated panels, partitions - Crash rails, corner guards - Profile moldings and trim - Kick plates, base moldings

HIGH IMPACT SHEET Boltaron Rigiwall® 4333 is a proprietary, UL Standard 723 listed, calendered Acrylic/PVC Alloy sheet, designed as a durable, protective, interior wall covering. Boltaron Rigiwall® 4333 offers a class 1/A building code rating, excellent impact strength, abrasion resistance, and stain and chemical resistance. CHARACTERISTICS - Impact resistance - Damage resistant - Low minimums - Thermoformable USES - Interior wall covering

DURABLE CLASS 1/A INTERIOR WALLCOVERING CHARACTERISTICS - Meets class 1-A to 0.125 in. (3.18 mm) - Durable, high impact resistance - Abrasion, stain and chemical resistant - Easy to clean, maintain - Uniform surface appearance USES - Protective wallcovering - Pre-laminated panels, partitions - Crash rails, corner guards - Profile moldings and trim - Kick plates, base moldings

DURABLE INTERIOR WALL PROTECTION IN CUSTOM COLORS AND TEXTURES CHARACTERISTICS - Meets EN13501-1 B, s 2, d 0 (2.0 mm) - Uniform surface appearance - Durable with high impact resistance - Abrasion, stain and chemical resistant - Easy to clean and maintain USES - Protective wallcovering - Kick plates and base moldings - Pre-laminated panels and partitions - Crash rails and corner guards - Profile moldings and trim