OnFlex™-S KG thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds are specially compatabilized to provide excellent adhesion to polyamide polymers including PA6, PA6.6, PA11 and PA12. OnFlex™-S KG can be processed by 2K molding or overmolding, insert molding or co-extrusion. In addition to this, OnFlex™-S KG compounds are formulated to provide good processability and a good cost/performance ratio, a wide hardness range, good colourability and good mechanical properties.

OnFlex™-S KG thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds are specially compatabilized to provide excellent adhesion to polyamide polymers including PA6, PA6.6, PA11 and PA12. OnFlex™-S KG can be processed by 2K molding or overmolding, insert molding or co-extrusion. In addition to this, OnFlex™-S KG compounds are formulated to provide good processability and a good cost/performance ratio, a wide hardness range, good colourability and good mechanical properties.

OnFlex™-U thermoplastic elastomer compounds are based on thermoplastic polyurethane elastomers (TPE-U). The OnFlex™-U 5300 series are based upon alloys of SEBS and TPU, combining the advantages of both raw materials, for example the good processability and soft haptic of a TPE-S with the excellent mechanical properties and abrasion resistance of a TPE-U. OnFlex™-U 5300 compounds are formulated to deliver very good scratch resistance, a wide hardness range and good chemical resistance.

OnFlex™ U 5365A-E0134 FG is a performance TPU alloy designed for use in injection molding application where FDA compliance and Overmolding onto PC, ABS and PC/ABS substrates are required.

OnFlex™ U thermoplastic elastomer compounds are based on thermoplastic polyurethane elastomers (TPE-U). The OnFlex™ U 5300 series are based upon alloys of SEBS and TPU, combining the advantages of both raw materials, for example the good processability and soft haptic of a TPE-S with the excellent mechanical properties and abrasion resistance of a TPE-U. OnFlex™ U 5300 compounds are formulated to deliver very good scratch resistance, a wide hardness range and good chemical resistance.

OnFlex™-U thermoplastic elastomer compounds are based on thermoplastic polyurethane elastomers (TPE-U). The OnFlex™-U 5300 series are based upon alloys of SEBS and TPU, combining the advantages of both raw materials, for example the good processability and soft haptic of a TPE-S with the excellent mechanical properties and abrasion resistance of a TPE-U. OnFlex™-U 5300 compounds are formulated to deliver very good scratch resistance, a wide hardness range and good chemical resistance.

OnFlex™-U thermoplastic elastomer compounds are based on thermoplastic polyurethane elastomers (TPE-U). The OnFlex™-U 5300 series are based upon alloys of SEBS and TPU, combining the advantages of both raw materials, for example the good processability and soft haptic of a TPE-S with the excellent mechanical properties and abrasion resistance of a TPE-U. OnFlex™-U 5300 compounds are formulated to deliver very good scratch resistance, a wide hardness range and good chemical resistance.

OnFlex™-U thermoplastic elastomer compounds are based on thermoplastic polyurethane elastomers (TPE-U). The OnFlex™-U 5300 series are based upon alloys of SEBS and TPU, combining the advantages of both raw materials, for example the good processability and soft haptic of a TPE-S with the excellent mechanical properties and abrasion resistance of a TPE-U. OnFlex™-U 5300 compounds are formulated to deliver very good scratch resistance, a wide hardness range and good chemical resistance.

OnFlex™-U thermoplastic elastomer compounds are based on thermoplastic polyurethane elastomers (TPE-U). The OnFlex™-U 5400 series are based upon alloys of SEBS and aliphatic TPU, combining the advantages of both raw materials, for example the good processability and soft haptic of a TPE-S with the excellent mechanical properties and abrasion resistance of a TPE-U. OnFlex™-U 5400 compounds are formulated to deliver very good scratch resistance, a wide hardness range, good chemical resistance, and good light stability.

OnFlex™-V provides the performance of traditional vulcanised rubber, but with the processability of a thermoplastic. OnFlex™-V 3000 series thermoplastic elastomer compounds are based on a polyolefin phase with a cross-linked EPDM phase dispersed within it. This range of compounds are specially formulated to provide the melt strength and processability required for blow-moulding processes. In addition to this, OnFlex™-V 3000 series thermoplastic elastomer compounds provide excellent colourability (low yellowness), good mechanical properties, excellent flexibility over a wide temperature range, a wide hardness range, and good hydrocarbon, heat ageing and weather resistance.

OnFlex™-V provides the performance of traditional vulcanised rubber, but with the processability of a thermoplastic. OnFlex™-V 3000 series thermoplastic elastomer compounds are based on a polyolefin phase with a cross-linked EPDM phase dispersed within it. This range of compounds are specially formulated to provide the melt strength and processability required for blow-moulding processes. In addition to this, OnFlex™-V 3000 series thermoplastic elastomer compounds provide excellent colourability (low yellowness), good mechanical properties, excellent flexibility over a wide temperature range, a wide hardness range, and good hydrocarbon, heat ageing and weather resistance.

OnFlex™-V provides the performance of traditional vulcanised rubber, but with the processability of a thermoplastic. OnFlex™-V 3000 series thermoplastic elastomer compounds are based on a polyolefin phase with a cross-linked EPDM phase dispersed within it. This range of compounds are specially formulated to provide the melt strength and processability required for blow-moulding processes. In addition to this, OnFlex™-V 3000 series thermoplastic elastomer compounds provide excellent colourability (low yellowness), good mechanical properties, excellent flexibility over a wide temperature range, a wide hardness range, and good hydrocarbon, heat ageing and weather resistance.

reSound™ BIO RS2800-0001 30N is a bio-based thermoplastic elastomer with 60% bio-based content. This material is targeted for consumer applications. reSound™ BIO RS2800-0001 30N can also be overmolded onto PP.

reSound™ BIO RS2800-0001 45N is a bio-based thermoplastic elastomer with 55% bio-based content. This material is targeted for consumer applications. reSound™ BIO RS2800--0001 45N can also be overmolded onto PP.

reSound™ BIO RS2800-0001 60N is a bio-based thermoplastic elastomer with 50% bio-based content. This material is targeted for consumer applications. reSound™ BIO RS2800--0001 60N can also be overmolded onto PP.

reSound™ BIO RS2800-0001 70N is a bio-based thermoplastic elastomer with 45% bio-based content. This material is targeted for consumer applications. reSound™ BIO RS2800--0001 70N can also be overmolded onto PP.

reSound™ BIO RS7900-0001 30N is a bio-based thermoplastic elastomer with 35% bio-based content. This material is targeted for consumer applications. reSound™ BIO RS7900--0001 30N can also be overmolded onto PP.

reSound™ BIO RS7900-0001 45N is a bio-based thermoplastic elastomer with 35% bio-based content. This material is targeted for consumer applications. reSound™ BIO RS7900--0001 45N can also be overmolded onto PP.

reSound™ BIO RS2800-0001 60N is a bio-based thermoplastic elastomer with 35% bio-based content. This material is targeted for consumer applications. reSound™ BIO RS2800--0001 60N can also be overmolded onto PP.

reSound™ BIO RS7900-0001 70N is a bio-based thermoplastic elastomer with 35% bio-based content. This material is targeted for consumer applications. reSound™ BIO RS7900--0001 70N can also be overmolded onto PP.

reSound™ OM 5530-55N is a specialty bio-renewable thermoplastic elastomer material designed for overmolding onto ABS, PC, PC/ABS and Copolyester.

reSound™ OM 5530-65N is a specialty bio-renewable thermoplastic elastomer material designed for overmolding onto ABS, PC, PC/ABS and Copolyester.

reSound™ OM 5530-80N is a specialty bio-renewable thermoplastic elastomer material designed for overmolding onto ABS, PC, PC/ABS and Copolyester.

reSound™ OM 5540-30N is a specialty bio-renewable thermoplastic elastomer material with 40% bio content, designed for overmolding onto PP.

reSound™ OM 5540-40N is a specialty bio-renewable thermoplastic elastomer material with 40% bio content, designed for overmolding onto PP.

reSound™ OM 5540-50N is a specialty bio-renewable thermoplastic elastomer material with 40% bio content, designed for overmolding onto PP.

reSound™ OM 5540-60N is a specialty bio-renewable thermoplastic elastomer material with 40% bio content, designed for overmolding onto PP.

reSound™ OM 5540-70N is a specialty bio-renewable thermoplastic elastomer material with 40% bio content, designed for overmolding onto PP.

reSound™ OM 5540-80N is a specialty bio-renewable thermoplastic elastomer material with 40% bio content, designed for overmolding onto PP.

reSound™ OM 5540-90N is a specialty bio-renewable thermoplastic elastomer material with 40% bio content, designed for overmolding onto PP.

reSound™ R DY 7810-801 C 30A Natural is a specialty post-consumer-recycled (PCR) based thermoplastic elastomer material with 9% recycled content. The compound is designed for consumer applications and formulated based on hydrogenated styrenic block copolymer (SEBS).

reSound™ R DY 7810-801 C 40A Natural is a specialty post-consumer-recycled (PCR) based thermoplastic elastomer material with 12% recycled content. The compound is designed for consumer applications and formulated based on hydrogenated styrenic block copolymer (SEBS).

reSound™ R DY 7810-801 C 50A Natural is a specialty post-consumer-recycled (PCR) based thermoplastic elastomer material with 15% recycled content. The compound is designed for consumer applications and formulated based on hydrogenated styrenic block copolymer (SEBS).

reSound™ R DY 7810-801 C 60A Natural is a specialty post-consumer-recycled (PCR) based thermoplastic elastomer material with 21% recycled content. The compound is designed for consumer applications and formulated based on hydrogenated styrenic block copolymer (SEBS).

reSound™ R DY 7810-801 C 70A Natural is a specialty post-consumer-recycled (PCR) based thermoplastic elastomer material with 23% recycled content. The compound is designed for consumer applications and formulated based on hydrogenated styrenic block copolymer (SEBS).

reSound™ R DY 7810-801 C 80A Natural is a specialty post-consumer-recycled (PCR) based thermoplastic elastomer material with 30% recycled content. The compound is designed for consumer applications and formulated based on hydrogenated styrenic block copolymer (SEBS).

reSound™ R DY 7810-801 C 90A Natural is a specialty post-consumer-recycled (PCR) based thermoplastic elastomer material with 39% recycled content. The compound is designed for consumer applications and formulated based on hydrogenated styrenic block copolymer (SEBS).

reSound™ R DY 7820-801 C 30A Natural is a specialty post-consumer-recycled (PCR) based thermoplastic elastomer material with 60% recycled content. The compound is designed for consumer applications and formulated based on hydrogenated styrenic block copolymer (SEBS).

reSound™ R DY 7820-801 C 40A Natural is a specialty post-consumer-recycled (PCR) based thermoplastic elastomer material with 60% recycled content. The compound is designed for consumer applications and formulated based on hydrogenated styrenic block copolymer (SEBS).

reSound™ R DY 7820-801 C 50A Natural is a specialty post-consumer-recycled (PCR) based thermoplastic elastomer material with 60% recycled content. The compound is designed for consumer applications and formulated based on hydrogenated styrenic block copolymer (SEBS).