Acétal (acétal): Homopolymère acétal (POM)
Produit | Disponibilité | Description du produit |
---|---|---|
4POM® 10I30000 | Europe |
4POM 10I30000 is a MFI 27 Unfilled POM
|
4POM® 23I00000 | Europe |
4POM 23I00000 is a MFI 2.5 Unfilled POM
|
4POM® 23I10000 | Europe |
4POM 23I10000 is a MFI 9 Unfilled POM
|
4POM® 23I15200 | Europe |
4POM 23I15200 is a MFI 9 Silicone Lubricated POM
|
4POM® 9I11230 H | Europe |
4POM 9I11230 H is a MFI 9 30% Barium Sulphate Filled Heat Stabilised POM
|
4POM® 9I12125 H | Europe |
4POM 9I12125 H is a MFI 9 25% Glass Fibre Reinforced Heat Stabilised POM
|
4POM® 9I15100 | Europe |
4POM 9I15100 is a MFI 9 PTFE Lubricated POM
|
4POM® 9I15120 | Europe |
4POM 9I15120 is a MFI 9 20% PTFE Lubricated POM
|
Acetron® AF Blend POM-H | Afrique & Moyen-Orient |
Ertacetal® H-TF / Acetron® AF Blend Polyoxymethylene POM-H is a PTFE-filled Homopolymer that offers enhanced wear resistance over other acetal grades, a lower coefficient of friction, great wear performance in wet environments, and low moisture absorption. Components made from Ertacetal® H-TF / Acetron® AF Blend POM-H are unique, due to their ability to operate at higher speeds while exhibiting reduced wear. Due to these characteristics, these components are often used in conveying and material handling environments as bushings, bearings, electrical components, and rollers.
|
Acetron® POM-H | Afrique & Moyen-Orient |
Acetron® Polyoxymethylene POM-H / Ertacetal® H Polyoxymethylene POM-H is a homopolymer acetal grade that offers superior mechanical strength, stiffness, hardness, and creep resistance, in addition to a much lower thermal expansion rate and increased wear resistance when compared to copolymer acetal grades. Due to these characteristics, Acetron® POM-H / Ertacetal® H POM-H excel in a variety of applications including small diameter, thin-walled bushings and bearings, gears, electrical components, medical and diagnostic equipment, valves, and fluid handling components.
|
ALCOLOR® POM WT5015-18 | Amérique du Nord |
Base Polymer
Polyoxymethylene/general
Colour
white, similar to RAL 9016, similar to RAL 9010
Thermal Stability Colourant
220 °C max.
Light Fastness Colourant
blue woolscale 8
For Use In
Polyoxymethylene/general, Polyoxymethylene Copolymer
Special Features
free from cadmium, lead and diarylide pigments, high additive content, high dispersibility, dust-free
Market Segment
Machinery, electrical and electronic, Furniture, building and construction, sport and leisure
Application Area
extruded parts, injection moulded parts
Dosage
2,0 % extrusion
2,0 % injection moulding
dependant on wall thickness and required colour intensity
dependant on application and operational area
|
ALCOM® POM 770/1 PTFE10 | Amérique du Nord |
Base Polymer
Polyoxymethylene/general
Filler/Additive System
10 % PTFE
Special Features
heat stabilised, easy release (demoulding), improved sliding / wear
Market Segment
various
Application Area
various
|
AUROform® POM H03 black | Europe |
AUROform® H03 black is a regranulated POM-Homopolymer injection molding grade with high rigidity, hardness, toughness and high viscosity. Contains sorted post-industrial plastic parts and sprues.
Typical Applications: Gear wheels, locking devices, technical housings, furniture fixtures
|
AUROform® POM H03 natural | Europe |
AUROform® H03 natural is a regranulated POM-Homopolymer injection molding grade with high rigidity, hardness, toughness and high viscosity. Contains sorted post-industrial plastic parts and sprues.
Typical Applications: Gear wheels, locking devices, technical housings, furniture fixtures
|
AUROform® POM H15 black | Europe |
AUROform® H15 black is a regranulated POM-Homopolymer injection molding grade with high rigidity, hardness, toughness and medium viscosity. Contains sorted post-industrial plastic parts and sprues.
Typical Applications: Gear wheels, locking devices, technical housings, furniture fixtures
|
AUROform® POM H15 natural | Europe |
AUROform® H15 natural is a regranulated POM-Homopolymer injection molding grade with high rigidity, hardness, toughness and medium viscosity. Contains sorted post-industrial plastic parts and sprues.
Typical Applications: Gear wheels, locking devices, technical housings, furniture fixtures
|
AuroraGuard™ 1402 | Afrique & Moyen-Orient |
Acetal Homopolymer (POM)
Formerly known as EnPom 1402
|
BESTPOM H02/01 | Europe |
Acetal homopolymer resin natural low fluidity. As it has high viscosity is perfect to achieve pieces with good mechanical properties in terms of rigidity, stiffness and impact, is suggested for technical pieces of automotive and technical gear pieces.
|
BESTPOM H02/02 | Europe |
Acetal homopolymer resin black low fluidity. As it has high viscosity is perfect to achieve pieces with good mechanical properties in terms of rigidity, stiffness and impact, is suggested for technical pieces of automotive and technical gear pieces.
|
BESTPOM H14/01 | Europe |
Acetal homopolymer resin natural medium fluidity, lubrified, is a medium viscosity resin which combines good physical properties and good injection.
|
BESTPOM H14/02 | Europe |
Acetal homopolymer resin black medium fluidity, lubrified, is a medium viscosity resin which combines good physical properties and good injection.
|
Cheng Yu FV3010 | Asie Pacifique | |
Cheng Yu FV3015 | Asie Pacifique | |
Cheng Yu FV3020 | Asie Pacifique | |
Cheng Yu FV3025 | Asie Pacifique | |
Cheng Yu FV3030 | Asie Pacifique | |
Cheng Yu FV3035 | Asie Pacifique | |
Cheng Yu FV3050 | Asie Pacifique | |
Cheng Yu FV30710 | Asie Pacifique | |
Cheng Yu FV30715 | Asie Pacifique | |
Cheng Yu FV30720 | Asie Pacifique | |
Cheng Yu FV30725 | Asie Pacifique | |
Cheng Yu FV30730 | Asie Pacifique | |
Cheng Yu FV30G10 | Asie Pacifique | |
Cheng Yu FV30G15 | Asie Pacifique | |
Cheng Yu FV30G20 | Asie Pacifique | |
Cheng Yu FV30G25 | Asie Pacifique | |
Cheng Yu FV30G30 | Asie Pacifique | |
Clariant Acetal HP-GF-20 | Amérique du Nord | |
Clariant Acetal HP-MF1 | Amérique du Nord |