ELVAX™ 350 is an ethylene-vinyl acetate copolymer resin for use in industrial applications. Composition - 25 % By Weight Vinyl Acetate comonomer content - Thermal Stabilizer: BHT antioxidant Applications - ELVAX™ resins can be used in a variety of applications involving molding, compounding, extrusion, adhesives, sealants, and wax blends.

ELVAX™ 360 is an ethylene-vinyl acetate copolymer resin for use in industrial applications. Composition - 25 % By Weight Vinyl Acetate comonomer content - Thermal Stabilizer: BHT antioxidant Applications - ELVAX™ resins can be used in a variety of applications involving molding, compounding, extrusion, adhesives, sealants, and wax blends.

ELVAX™ 40L-03 is an ethylene-vinyl acetate copolymer resin for use in industrial applications. The melt index is consistent because resin molecular weight distribution is controlled to within a relatively narrow range. The molecular weight is high for this family of copolymers, so finished products will be relatively resistant to mechanical damage and elevated temperatures. Compared with other ethylene/vinyl acetate copolymers, ELVAX™ 40L-03 contains extremely low amounts of gel, or high-molecular-weight polymer, that can cause undesirable characteristics in finished products. Because ELVAX™ 40L-03 is somewhat crystalline, it is free flowing and does not mass during handling. Uses - Industrial Applications z - Wire & Cable Applications - Wire Jacketing Composition - 40 % By Weight Vinyl Acetate comonomer content - Thermal Stabilizer: BHT antioxidant Features - High Molecular Weight, High Viscosity Applications - ELVAX™ resins can be used in a variety of applications involving molding, compounding, extrusion, adhesives, sealants, and wax blends. - ELVAX™ 40L-03 is especially well suited for use in jacketing compounds for automotive ignition and low-smoke cables, and as strippable semiconductive shields for power cables. - In these applications, the relatively narrow molecular weight distribution and the low gel properties help ensure that compounds will be consistent and finished products will be smooth-surfaced. Smooth, glossy surfaces are desirable because they can imply quality, while uniformity can enhance long-term performance. - Power cable semiconductive shields made with ELVAX™40L-03 also benefit from the consistency of their compounds and low gel content. Any inconsistency in shields can lead to cable failure.

ELVAX™ 40W is an ethylene-vinyl acetate copolymer resin for use in industrial applications. This resin is supplied in pellet form and contains a "W" amide additive to improve pellet handling. Composition - 40 % By Weight Vinyl Acetate comonomer content - Contains a "W" amide additive to improve pellet handling. - Thermal Stabilizer: BHT antioxidant Applications - ELVAX™ resins can be used in a variety of applications involving molding, compounding, extrusion, adhesives, sealants, and wax blends.

ELVAX™ 420 is an ethylene-vinyl acetate copolymer resin for use in industrial applications. Composition - 18 % By Weight Vinyl Acetate comonomer content - Thermal Stabilizer: BHT antioxidant Applications - ELVAX™ resins can be used in a variety of applications involving molding, compounding, extrusion, adhesives, sealants, and wax blends.

ELVAX™ 4260 is an ethylene-vinyl acetate / acid terpolymer resin for use in industrial applications. Composition - 28 % By Weight Vinyl Acetate comonomer content - Also contains 1 wt% Methacrylic Acid - Thermal Stabilizer: BHT antioxidant Characteristics/Benefits - High molecular weight resin for use in hot melt systems where improved adhesion to polar, nonporous substrates is required. In coatings, provides superior hot tack, improved grease resistance, and optimum barrier properties. Applications - ELVAX™ resins can be used in a variety of applications involving molding, compounding, extrusion, adhesives, sealants, and wax blends.

ELVAX™ 4310 is an ethylene-vinyl acetate / acid terpolymer resin for use in industrial applications. Composition - 25% By Weight Vinyl Acetate comonomer content - Also contains 1 wt% Methacrylic Acid - Thermal Stabilizer: BHT antioxidant Characteristics/Benefits - Low molecular weight resin designed to provide improved grease resistance and adhesion in low-viscosity systems. Permits maximum ELVAX™ content at a given viscosity in solvent or hot melt systems. Applications - ELVAX™ resins can be used in a variety of applications involving molding, compounding, extrusion, adhesives, sealants, and wax blends.

ELVAX™ 4355 is an ethylene-vinyl acetate / acid terpolymer resin for use in industrial applications. Composition - 25% By Weight Vinyl Acetate comonomer content - 1 wt% Methacrylic Acid - Thermal Stabilizer: BHT antioxidant Characteristics/Benefits - High molecular weight resin preferred in high hot-tack systems. Most effective of the 4300 series resins in imparting toughness, flexibility, and seal strength in blends with wax. Applications - ELVAX™ resins can be used in a variety of applications involving molding, compounding, extrusion, adhesives, sealants, and wax blends.

ELVAX™ 450 is an ethylene-vinyl acetate copolymer resin for use in industrial applications. Composition - 18 % By Weight Vinyl Acetate comonomer content - Thermal Stabilizer: BHT antioxidant Applications - ELVAX™ resins can be used in a variety of applications involving molding, compounding, extrusion, adhesives, sealants, and wax blends.

ELVAX™ 460 is an ethylene-vinyl acetate copolymer resin for use in industrial applications. Composition - 18 % By Weight Vinyl Acetate comonomer content - Thermal Stabilizer: BHT antioxidant Applications - ELVAX™ resins can be used in a variety of applications involving molding, compounding, extrusion, adhesives, sealants, and wax blends.

ELVAX™ 470 is an ethylene-vinyl acetate copolymer resin for use in industrial applications. Composition - 18 % By Weight Vinyl Acetate comonomer content - Thermal Stabilizer: BHT antioxidant Applications - ELVAX™ resins can be used in a variety of applications involving molding, compounding, extrusion, adhesives, sealants, and wax blends.

ELVAX™ 550 is an ethylene-vinyl acetate copolymer resin for use in industrial applications. Composition - 15 % By Weight Vinyl Acetate comonomer content - Thermal Stabilizer: BHT antioxidant Applications - ELVAX™ resins can be used in a variety of applications involving molding, compounding, extrusion, adhesives, sealants, and wax blends.

ELVAX™ 560 is an ethylene-vinyl acetate copolymer resin for use in industrial applications. Composition - 15 % By Weight Vinyl Acetate comonomer content - Thermal Stabilizer: BHT antioxidant Applications - ELVAX™ resins can be used in a variety of applications involving molding, compounding, extrusion, adhesives, sealants, and wax blends.

ELVAX™ 650Q is an ethylene-vinyl acetate copolymer resin for use in industrial applications. Composition - 12 % By Weight Vinyl Acetate comonomer content - Thermal Stabilizer: BHT antioxidant Features - High level BHT antioxidant Applications - ELVAX™ resins can be used in a variety of applications involving molding, compounding, extrusion, adhesives, sealants, and wax blends.

ELVAX™ 660 is an ethylene-vinyl acetate copolymer resin for use in industrial applications. Composition - 12 % By Weight Vinyl Acetate comonomer content - Thermal Stabilizer: BHT antioxidant Applications - ELVAX™ resins can be used in a variety of applications involving molding, compounding, extrusion, adhesives, sealants, and wax blends.

ELVAX™ 670 is an ethylene-vinyl acetate copolymer resin for use in industrial applications. Composition - 12 % By Weight Vinyl Acetate comonomer content - Thermal Stabilizer: BHT antioxidant Applications - ELVAX™ resins can be used in a variety of applications involving molding, compounding, extrusion, adhesives, sealants, and wax blends.

ELVAX™ 750 is an ethylene-vinyl acetate copolymer resin for use in industrial applications. Composition - 9 % By Weight Vinyl Acetate comonomer content - Thermal Stabilizer: BHT antioxidant Applications - ELVAX™ resins can be used in a variety of applications involving molding, compounding, extrusion, adhesives, sealants, and wax blends.

ELVAX™ 760 is an ethylene-vinyl acetate copolymer resin for use in industrial applications. Composition - 9.3 % By Weight Vinyl Acetate - Thermal Stabilizer: BHT antioxidant Features - Low level BHT antioxidant Applications - ELVAX™ resins can be used in a variety of applications involving molding, compounding, extrusion, adhesives, sealants, and wax blends.

ELVAX™ 770 is an ethylene-vinyl acetate copolymer resin for use in industrial applications. Composition - 9.5 % By Weight Vinyl Acetate comonomer content - Thermal Stabilizer: BHT antioxidant Applications - ELVAX™ resins can be used in a variety of applications involving molding, compounding, extrusion, adhesives, sealants, and wax blends.

ELVAX™ CE9619-1 is an extrudable ethylene-vinyl acetate copolymer resin concentrate designed to modify the surface properties of films or coatings of ELVAX™ Resins or other compatible polymers. This is a concentrated masterbatch product and is designed to be blended with the resin to be modified. This concentrate contains 20 wt.% antiblock and 7 wt.% slip additives. It is available in in pellet form for use in conventional extrusion equipment designed to process polyethylene resins. Composition - 73% By Weight of an 18% By Weight Vinyl Acetate comonomer content resin - Thermal Stabilizer: BHT antioxidant - 7% By Weight Amide based slip agent - 20% By Weight Inorganic antiblock agent Features - This is a concentrated masterbatch product and is designed to be blended with other polymers. This resin is not intended to be extruded in its fure form. Applications - This resin is designed to modify the surface properties of films or coatings of ELVAX™ Resins or other compatible polymers.

EVERCAP™ 1190 enables the right performance properties to meet the demanding needs of lined closures. EVERCAP™ 1190 is designed for non-PVC liners of beverage closures where consistent seal, application torque, removal torque, and optimum sensory are required to maintain the quality of beverages. EVERCAP™ 1190 is designed for liners for applications such as roll on pilfer proof closures, pry off and twist off crown caps and other lined beverage closures. Complies with: - U.S. FDA 21 CFR 177.1520 (c) 2.2 - EU, No 10/2011 - JHOSPA, registered by Japan Hygienic Olefin and Styrene Plastics Association CN1, Compliance with China Food contact standards Consult the regulations for complete details.

EVERCAP™ DMDA-1220 NT 7 High Density Polyethylene Resin (HDPE) enables the right performance properties to meet demanding one-piece closure application needs. It is intended for use in compression molded one-piece closures designed for carbonated soft drinks, pressurized water and alternative beverages where sterilization processes such as hot fill and aseptic processes are used. EVERCAP™ DMDA-1220 delivers a combination of improved properties such as improved stiffness, improved ESCR, higher heat deflection temperature, and consistent processing. EVERCAP™ DMDA-1220 offers the ability to light-weight closures to meet the ongoing trend by industry for improved sustainability. Targeted Applications and Product Characteristics: - Compression Molded One-Piece Light Weight CSD, Pressurized Water and Alternative Beverage Closures - Excellent Stiffness, ESCR, and Impact Strength - Excellent Sensory Properties - Excellent Processing Characteristics - High Heat Deflection Temperature Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - Europe Commission Regulation (EU) No 10/2011 - HPFB (Canada), No Objection Consult the regulations for complete details.

EVERCAP™ DMDA-1245 NT 7 High Density Polyethylene (HDPE) Resin is produced via UNIPOLTM Process Technology from Dow and is intended for use in a broad range of injection molding applications such as fitments, housewares, toys, food containers and pails. This resin has been designed to provide an excellent balance of oxygen barrier, toughness, environmental stress crack resistance and processability. Characteristics: - Injection molding - For injection molded fitments - Excellent balance of toughness, stress crack resistance and processability - Very narrow molecular weight distribution - For injection molded fitments Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.2a - Canadian HPFB No Objection Consult the regulations for complete details.

EVERCAP™ DMDA-1247 NT 7 High Density Polyethylene (HDPE) Resin is a narrow molecular weight distribution high density homopolymer designed to offer excellent oxygen barrier, stiffness, low warpage, good/acceptable toughness, and good moldability. This resin is ideally suited for injection molded closures and other objects requiring oxygen barrier. Characteristics: - Excellent stiffness/modulus - Excellent warp resistance - Molded parts have high gloss, low odor - For injection molded closures and other parts needing high modulus Complies with: - U.S. FDA 21 CFR 177.1520 (c)2.2 - Canadian HPFB No Objection Consult the regulations for complete details.

EVERCAP™ DMDA-1260 NT 7 High Density Polyethylene Resin (HDPE) enables the right performance properties to meet demanding closure and fitment application needs. It is intended for use in compression and injection molded one piece beverage closures designed primarily for applications that undergo hot fill or aseptic sterilization processes. EVERCAP™ DMDA-1260 offers improved performance for injection molded fitments designed for fitted pouches where its balance of properties are desired. EVERCAP™ DMDA-1260 delivers a combination of improved properties such as improved stiffness, higher heat deflection temperature, improved ESCR, gaseous barrier, and easy processing versus alternative HDPE systems typically used for hot fill and aseptic sterilization processes. The end result is the ability to light weight closures that are s are longer term closure performance, easy opening closures without the use of slip agent and consistent processing. for aseptic applications where an acid wash can remove the slip agent and potentially plug wash water filters. Targeted Applications and Product Main Characteristics: - Compression and Injection Molded Light Weight Aseptic or Hot Fill Beverage Closures - Controlled Removal Torques without Slip for Aseptic Applications - Excellent Stiffness, ESCR, Gaseous Barrier and Impact Strength - Excellent Sensory Properties - Excellent Processing Characteristics - High Heat Deflection Temperature - Controlled Sensory Properties Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - Europe Commission Regulation (EU) No 10/2011 - U.S. USP CLASS VI Consult the regulations for complete details.

EVERCAP™ DMDB-1220 NT 7 High Density Polyethylene Resin (HDPE) enables the right performance properties to meet demanding one-piece closure application needs. It is intended for use in compression molded one-piece closures designed for carbonated soft drinks, pressurized water and alternative beverages where sterilization processes such as hot fill and aseptic processes are used. EVERCAPTM DMDB-1220 delivers a combination of improved properties such as improved stiffness, improved ESCR, higher heat deflection temperature, and consistent processing. EVERCAPTM DMDB-1220 offers the ability to light-weight closures to meet the ongoing trend by industry for improved sustainability. Targeted Applications and Product Characteristics: - Compression Molded One-Piece Light Weight CSD, Pressurized Water and Alternative Beverage Closures - Excellent Stiffness, ESCR, and Impact Strength - Excellent Sensory Properties - Excellent Processing Characteristics - High Heat Deflection Temperature Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - Europe Commission Regulation (EU) No 10/2011 - Canadian HPFB No Objection Consult the regulations for complete details.

EVERCAP™ DMDC-1260 NT 7 High Density Polyethylene Resin (HDPE) enables the right performance properties to meet demanding closure and fitment application needs. It is intended for use in compression and injection molded one piece beverage closures designed primarily for applications that undergo hot fill or aseptic sterilization processes. EVERCAP™ DMDC-1260 offers improved performance for injection molded fitments designed for fitted pouches where its balance of properties is desired. EVERCAP™ DMDC-1260 delivers a combination of improved properties such as improved stiffness, higher heat deflection temperature, improved ESCR, reduced ovalization during transport, and easy processing versus alternative HDPE systems typically used for hot fill and aseptic sterilization processes. EVERCAP™ DMDC-1260 offers the superior performance of EVERCAP™ DMDA-1260 with slip. Targeted Applications and Product Main Characteristics: • Compression and Injection Molded Light Weight Aseptic or Hot Fill Beverage Closures • Controlled Torque Values with Slip • Reduced closure ovalization during transport • Excellent Stiffness, ESCR, Gaseous Barrier and Impact Strength • Excellent Sensory Properties • Excellent Processing Characteristics • High Heat Deflection Temperature Complies with: • U.S. FDA 21 CFR 177.1520(c)3.2a • Europe Commission Regulation (EU) No 10/2011 • U.S. USP CLASS VI Consult the regulations for complete details.

EVERCAP™ DMDD-1210 NT 7 High Density Polyethylene Resin enables the right performance properties to meet demanding closure and fitment application needs. It is intended for use in both compression and injection molded closure applications. This resin has been designed to meet demanding performance requirements, especially in the areas of stiffness, impact strength, and sensory, while maintaining good processing characteristics beneficial to molders. Typical applications include injection molded closures for water, juice, dairy, and sports drinks, including hot fill and aseptic bottling applications, where minimizing the contribution of the package to the taste of the product and use of slip is a requirement. Main Characteristics: - Excellent Stiffness and Impact Strength - Excellent Organoleptic Properties - Excellent Processing Characteristics Complies with: - U.S. FDA 21 CFR 177.1520(c)3.1a. - EU, No 10/2011 Consult the regulations for complete details Additives: 1500 ppm Slip

EVERCAP™ DMDF-1250 NT 7 High Density Polyethylene Resin (HDPE) enables the right performance properties to meet demanding closure and fitment application needs. It is intended for use in both compression and injection molded closure applications including carbonated soft drink and hot fill closures. Its unique properties also make it suitable for living hinge closure applications. This resin has been designed to meet demanding performance requirements, especially in the areas of environmental stress crack resistance, impact strength, and sensory, while maintaining good processing characteristics beneficial to molders. Main Characteristics: - Excellent ESCR, Stiffness, and Impact Strength - Excellent Sensory Properties - Excellent Processing Characteristics - Contains Slip Agent Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - Europe Commission Regulation (EU) No 10/2011 - Canadian HPFB No Objection Consult the regulations for complete details.

EVERCAP™ DMDA-1241 Experimental High Density Polyethylene (HDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for use as a polypropylene drop in replacement for a broad range of injection molding applications such as fitments, closures, and dispensing systems. This resin has been designed to provide an excellent balance of toughness, minimal shrinkage, balanced shrinkage, stiffness and processability. Main Characteristics: - Drop in Replacement for Polypropylene Injection Molded Closures and Dispensing Systems - Excellent Impact Strength - Excellent Processing Characteristics Complies with: - Complies with U.S. FDA 21 CFR 177.1520 (c)3.2a - EU, No 10/2011 - Consult the regulations for complete details

La résine polyéthylène basse densité linéaire FINGERPRINT™ DFDA-7510 NT est fabriquée grâce à la technologie de procédé UNIPOL™. Elle est destinée à être utilisée pour la fabrication de tubes de micro-irrigation, de tuyaux et de tubes longue durée, pour l'extrusion de profilés et les raccords fabriqués par moulage par injection. Elle est également utilisée comme composant de mélange pour modifier et améliorer les propriétés physiques des résines de polyéthylène à haute pression, à très basse densité, à basse densité linéaire ou à haute densité. Pour les applications en extérieur, l’ajout d’un stabilisant UV permet de préserver ses excellentes propriétés de résistance aux UV sur des périodes prolongées. Caractéristiques principales : - Exceptionnelle résistance à la fissuration sous contrainte environnementale - Excellente résistance à l’éclatement - Excellentes caractéristiques de consistance et d’extrusion - Excellente flexibilité favorisant une application facile Additif de lubrification : aucun Additif anti-adhérent : aucun Conformité avec les normes industrielles : - ASTM D 3350 : classification de cellules PE123110A

FINGERPRINT™ DFDA-7555 NT is a medium density bimodal polyethylene resin produced using Unipol™II process technology. It is intended for use in thin-wall micro irrigation tape applications and profile extrusion applications. DFDA-7555 NT exhibits good draw down characteristics producing tape with a reliable balance of extrusion ease and toughness. It also has utility as a blending component to modify and improve the physical properties of high pressure, very low density, linear low density, or high density polyethylene resins and post industrial resins. Outdoor applications require the addition of UV stabilizer to maintain the excellent properties over extended periods of UV exposure. Dow DFNF-0092 carbon black masterbatch at a 6.5% concentration has been found to offer suitable UV resistance. Main Characteristics: - High tensile properties - High elongation properties - Excellent burst strength Slip Additive: none Antiblock Additive: none Industrial Standards Compliance: - ASTM D 3350: cell classification PE335440A

FINGERPRINT™ DFDC-7525 NT est une résine polyéthylène de densité moyenne fabriquée grâce à la technologie de procédé Unipol™. Elle est utilisée pour des applications telles que les tuyaux à parois minces pour la micro-irrigation et les extrusions de profilés. Les caractéristiques de réduction de l'étirage de la résine DFDC-7525 NT favorisent la production de tuyaux alliant facilité d’extrusion et solidité. Elle est également utilisée comme composant de mélange pour modifier et améliorer les propriétés physiques des résines de polyéthylène à haute pression, à très basse densité, à basse densité linéaire ou à haute densité. Pour les applications en extérieur, l’ajout d’un stabilisant UV permet de préserver ses excellentes propriétés de résistance aux UV sur des périodes prolongées. Le mélange-maître de noir de carbone Dow DFNF-0092 à 6,5% fournit une résistance adéquate aux UV. Caractéristiques principales : - Propriétés de résistance à la traction élevées - Propriétés d’allongement élevées - Excellente résistance à l’éclatement Additif de lubrification : aucun Additif anti-adhérent : aucun Conformité avec les normes industrielles : - ASTM D 3350 : classification de cellules PE234510A

FINGERPRINT™ DFDD-7525 NT is a medium density polyethylene resin designed for use in thin-wall microirrigation tape applications. This product was designed to offer good profile extrusion processing characteristics coupled with great application performance attributes such as toughness, burst strength and environmental stress crack resistance. Main Characteristics: - High tensile strength - High burst strength - High environmental stress crack resistance Industrial Standards Compliance: - ASTM D 3350: cell classification PE234510A

La résine polyéthylène très basse densité (PETBD) FLEXOMER™ DFDA-1137 NT 7 est un copolymère conçu pour les applications de moulage et d’extrusion nécessitant une grande flexibilité. Elle convient particulièrement aux applications de tubes et de tuyaux flexibles ainsi qu’au moulage par soufflage de petites bouteilles compressibles. Elle est de masse moléculaire élevés avec une distribution moléculaire relativement étroite et offre une excellente résistance mécanique à basse température et une exceptionnelle résistance à la flexion alternée. Elle est également recommandée en tant que composant de mélange pour modifier et améliorer les propriétés physiques des résines de polyéthylène haute pression et basse densité linéaire. Conforme à : - La norme U.S. FDA 21 CFR 177.1520 (c) 3.1a - EU, No 10/2011 - La classification HPFB sans objection (avec restrictions) de la DGPSA du Canada Consulter la réglementation pour des détails complets.

FLEXOMER™ DFDC-1137 NT 7 Very Low-Density Polyethylene (VLDPE) Resin is an ethylene copolymer intended for use in molding and extrusion applications where high flexibility is desired. It is especially useful for fresh produce packaging films, flexible hose and tube applications as well as for blow molding small, squeezable bottles. The resin utilizes a TnPP (Tris(nonylphenyl) phosphite) free additive formulation. It has a high molecular weight and a relatively narrow molecular weight distribution and exhibits excellent low temperature toughness and outstanding flex life characteristics. It is also recommended as a blending component to modify and improve the physical properties of high pressure and linear low density polyethylene resins. Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.1a - EU, No 10/2011 Consult the regulations for complete details.

La résine polyéthylène très basse densité (PETBD) FLEXOMER™ ETS-9066 NT 7 est destinée à la fabrication de films soufflés unicouches ou multicouches ou de feuilles épaisses. Les films extrudés issus de la résine ETS-9066 NT 7 possèdent une résistance au déchirement, une résistance aux chocs et une résistance aux perforations élevées et conviennent parfaitement au thermoscellage. L’ajout d’agents de lubrification et d’agents anti-adhérents devrait être envisagée pour la plupart des applications. - Excellent équilibre entre solidité et résistance mécanique - Flexible sur une large fourchette de températures - Propriétés supérieures à basse température - Large fourchette de température de scellage - Conforme à la norme U.S. FDA 21 CFR 177.1520 (c) 3.1a (avec restrictions) - Un additif présent dans ce produit limite son utilisation aux applications de films pour contact alimentaire. - Consulter la réglementation pour des détails complets.

FUSABOND™ E100 is an anhydride modified high density polyethylene, mainly intended for use as a component in a blend with other polymers including polyolefins and polyamides. It is not intended for extrusion in its pure form in typical extrusions or coextrusions. Available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins. Uses - Polymer Modifier Composition - High% By Weight Maleic Anhydride - Graft levels are defined as: - Low < 0.2%; Medium 0.2-0.5%; High 0.5-1.0%; Ultra high > 1.0%

FUSABOND™ E158 is a anhydride modified polyethylene. Uses - Adhesives; Pipe Coating; Tie-Layer Composition - Medium% By Weight Maleic Anhydride - Graft levels are defined as: - Low < 0.2%; Medium 0.2-0.5%; High 0.5-1.0%; Ultra high > 1.0%

FUSABOND™ E204 is an anhydride modified high density polyethylene. Composition - Ultra High% By Weight Maleic Anhydride - Graft levels are defined as: - Low < 0.2%; Medium 0.2-0.5%; High 0.5-1.0%; Ultra high > 1.0% Applications - Compatibilizer. - Adhesion promoter between polyolefins, and metal, cellulose, glass.