B1054 is a High Density Polyethylene specially developed for blow molding and jerry cans. The material offers high stiffness, good processability and excellent combination of stiffness/ESCR.

B1054M is a High Density Polyethylene specially developed for blow molding and jerry cans. The material offers high stiffness, good processability and excellent combination of stiffness and ESCR with good impact resistance.

B4660 grade are medium molecular weight High Density Polyethylene homopolymer for blow molding Applications. They are primarily Designed for imparting high rigidity, toughness and good processability. These unique properties offer the possibility to reduce weight at very good top load strength. B4660: Suitable for Dairy products and Juice Packaging

B4660AB grade are medium molecular weight High Density Polyethylene homopolymer for blow molding Applications. They are primarily Designed for imparting high rigidity, toughness and good processability. These unique properties offer the possibility to reduce weight at very good top load strength. B4660AB: Suitable for Water packaging

HDPE B5206 is high density polyethylene specially developed for large blow molding / Jerry cans. The material offers high stiffness, good processability and excellent combination of stiffness/ESCR.

SABIC® HDPE B5210 is a material with a specific molecular weight distribution, typically used for blow molding of light weight UN certified cans from 2 to 20 liters. This product is not intended for and must not be used in any pharmaceutical/medical applications.

HDPE B5308 is a multi-modal HMW HDPE grade specifically designed for blow molding floaters for floating photovoltaic (PV) panel systems. It has outstanding ESCR (environmental stress crack resistance), excellent mechanical properties, very good toughness and stiffness balance, long lifetime and easy blow molding processability. B5308 is also suitable for large size containers such as water tanks and transportation containers when high ESCR and toughness/stiffness balance is required.

B5403 is a High Density Polyethylene specially developed for blow molding / Jerry cans and drums. The material offers and excellent combination of stiffness and ESCR and a high Impact resistance. This grade can be used in food contact applications.

HDPE B5403M is a High Density Polyethylene specially developed for blow molding / Jerry cans and drums.The material offers an excellent combination of stiffness and ESCR and a high Impact resistance.

SABIC® HDPE B5411 is a material with a semi-high molecular mass, additionally thermal stabilized and typically used for blow molding and sheet extrusion. This grade is combining stiffness, toughness with an high ESCR and is typically used for large bottles, cans, technical parts and toys. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® HDPE B5421 is typically used for blow molding consumer packaging up to 5 l, combining a good stiffness with an high ESCR. This grade is typically used for packaging detergents, cleaners, shampoos and cosmetics at a high ESCR demand. This product is not intended for and must not be used in any pharmaceutical/medical applications.

HDPE B5428 is a medium molecular weight high density polyethylene resin used for blow molding. Blow molded parts made from this resin exhibit high stiffness, good impact strength and good Environmental Stress-Cracking Resistance (ESCR).

B5429 grade is medium molecular weight High Density Polyethylene copolymer. They are primarily intended for blow molding articles of small sizes. B5429 series grades offer excellent combination of toughness, stress cracking resistance, load bearing strength with easy processability. The grade available with antistatic additive is B5429A.

HDPE B5822 is a High Density Polyethylene specially developed for small blow molded bottles. The material offers easy flow, higher stiffness, very good ESCR and sufficient impact strength.

HDPE B5822M is a High Density Polyethylene specially developed for small blow molded bottles. The material offers easy flow, higher stiffness, very good ESCR and sufficient impact strength. It exhibits a very good combination of high stiffness and high stress cracking resistance. HDPE B5822M demonstrates good organoleptic properties and has a broad molecular weight distribution.

SABIC® HDPE B5823 is typically used for blow moulding of consumer packaging up to 5 l, combining high stiffness and a good ESCR level. This grade is typically used for packaging the majority of household and industrial chemicals, such as detergents, cleaners, shampoos and cosmetics, as well as food packaging. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® HDPE B6246LS is typically used in food and beverage packaging, offering good purity and organoleptics as well as recycle ability. It combines a high rigidity with very good processing performance, which offers potential for system cost reduction. The grade is typically used for the blow molding of mono as well as multi layer bottles in several food markets, like fresh, pasteurized and ultra heat treated milk, sauces, orange juice, functional drinks, probiotics and other "daily shot" drinks. The material properties offer the possibility to reduce weight at good top load strength. This slip agent free grade is also typically used for the injection molding of caps & closures for carbonated soft drinks and sparkling water as well as high environmental stress crack resistant applications, like UN-pails and UN-caps & closures. This product is not intended for and must not be used in any pharmaceutical/medical applications.

BM1052J is a high molecular weight TNPP free High Density Polyethylene copolymer grade with broad molecular weight distribution. It has excellent process ability and exhibits very high impact strength, stiffness and superior environmental stress crack resistance.

BM6246LS is a medium molecular weight High Density Polyethylene homopolymer grade for blow molding applications. It is primarily designed for imparting high rigidity, toughness and good processability. These unique properties offer the possibility to reduce weight at very good top load strength.

C0549 is a black High Density Polyethylene designed for Jacketing compound. This grade has excellent processability and physical properties as well as high Environmental stress crack resistance. 2.5% Carbon Black is added to ensure an outstanding weather and UV resistance.

CC027C is a multimodal, high density polyethylene. It offers very good process ability in combination with stiffness, impact resistance, excellent ESCR and organoleptic properties. This grade is intended for injection and compression molding closures for sparkling water and carbonated soft drinks, particularly for latest designs of lightweight. CC027C does not contain slip agent.

SABIC® HDPE CC027SL is a multimodal, high density polyethylene. It offers very good process ability in combination with stiffness, impact resistance, excellent ESCR and organoleptic properties with controlled torque level. This grade is intended for injection and compression molding caps for sparkling water and carbonated soft drinks, particularly for latest designs of lightweight. SABIC® HDPE CC027SL contains slip agent.

SABIC® HDPE CC2056 is a high density polyethylene copolymer injection molding grade. Its narrow molecular weight distribution and high flow results in low warpage, good rigidity, good gloss and fast molding cycles. SABIC® HDPE CC2056 is typically used for caps and closures applications and thin wall articles. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC HDPE CC254 is state of the art resin produced by ACP technology. It is easy to process on injection molding and compression molding machines. The grade offers good balance of stiffness, toughness and environmental stress cracking resistance properties.

SABIC® HDPE CC3054 is a high density polyethylene copolymer injection molding grade. Its narrow molecular weight distribution and high flow results in low warpage, good rigidity, good gloss and fast molding cycles. SABIC® HDPE CC3054 is typically used for caps and closures applications and thin wall articles. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC HDPE CC453 is a High Density Polyethylene specially developed for the injection and compression molding of caps & closures for the packaging of beverages. This grade offers an ideal combination of impact strength, ESCR and meet organoleptic properties requirements.

SABIC® HDPE CC453G offers a good combination of stiffness, impact resistance, ESCR and organoleptic properties. The typical application of this grade is mainly injection molding and compression molding of caps for still water, slightly carbonated or pressurized drinks, juices or any other non-sparkling drinks. The product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® HDPE CC860 is a high-density polyethylene especially developed for injection and compression molding of still water caps that meet organoleptic properties requirements. The material offers an ideal combination of rigidity, impact strength and low warpage.

SABIC® HDPE CC860V is typically used for the injection molding of high demanding applications, such as caps & closures for still water applications. The material offers a good combination of stiffness and impact resistance. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® HDPE F00851 is a high molecular weight High Density Polyethylene copolymer grade typically used for blown film applications. It typically offers a good balance between toughness and stiffness, good impact properties with low gel level. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® HDPE F00950 resin is a high molecular weight, high density polyethylene copolymer. The design of the product, molecular architecture and density, gives F00950 a good balance of easy extrusion and high melt strength with strong physical properties. SABIC® HDPE F00950 is typically used for production of thin films with good strength and rigidity. The material contains anti-oxidants. SABIC® HDPE F00950 resin is typically used for blown film extrusion and production of high strength grocery sacks, shopping bags and high quality thin films for multi wall sack liners and replacement for thin paper products. SABIC® HDPE F00950 can be extruded on conventional HMW-HDPE equipment with temperature settings between 200 and 220°C. Film properties have been measured at 25 µm films with a BUR = 4.Film has been produced on Kiefel IBC film blown line at 160 kg/h with a die of 150 mm, die gap of 1.2 mm and a frostline height of 150 cm (= 10D). This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® HDPE F00952 resin is a high molecular weight High Density Polyethylene copolymer which has been designed specifically for blown film extrusion. It has broad molecular distribution and high density combine succesfully to give excellent extrudability with high film strength and rigidity. The material contains anti oxidant. ApplicationSABIC® HDPE F00952 resin isrecommended for blown film extrusion. This product is suggested for the manufacture of high strength grocery sacks, shopping bags and high quality thin films for multi wall sack liners and replacement for thin paper products. Films of this poduct are readily treated and printed to give high quality graphics.Processing conditionsSABIC® HDPE F00952 can be extruded on conventional HMW-HDPE equipment at melt temperatures between 200 and 235 °C.Film propertiesFilm properties have been measured at 15 µm blown film with a BUR = 4.

SABIC® HDPE F00952J resin is a high molecular weight, TNPP free high density polyethylene copolymer. The design of the product, molecular architecture and density, gives F00952J a good combination of easy extrusion and high melt strength with strong physical properties. Typical applications are thin films with excellent strength and rigidity. The material contains anti-oxidants. SABIC® HDPE F00952J resin is typically used for blown film extrusion and production of high strength grocery sacks, shopping bags and high quality thin films for multi wall sack liners and replacement for thin paper products. SABIC® HDPE F00952J can be extruded on conventional HMW-HDPE equipment at melt temperature settings between 200 and 220 °C. Film properties have been measured at 15 µm blown film with a BUR = 4. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® HDPE F01257AM is a multimodal high density polyethylene grade typically used for blown film applications. This grade has outstanding combination of stiffness and impact performance. SABIC® HDPE F01257AM can be processed on blown film lines at high output rates with excellent bubble stability, very low gel levels and homogeneous appearance which converters and end-users require for high quality thin and thick film production.

SABIC® HDPE F01552 is a medium molecular weight High Density Polyethylene specifically designed for blown film extrusion and can be used in tape and thin wall pipe extrusion. It has a broad molecular weight with excellent extrudability, high film strength and draw down characteristics. The material contains anti oxidant.

SABIC® HDPE F04660 is a homopolymer film grade with a broad processing window and high stiffness. It has good moisture barrier properties and can be blended with LDPE and LLDPE to improve film strength and rigidity. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® HDPE F0863 resin is a homopolymer with a very high density manufactured by gas phase technology. The grade offers high stiffness, high temperature resistance, low water vapor transmission and a very low gel level. Because of the linear character it is advisable to use the material in combination with extrusion coating LDPE grades like SABIC® LDPE 2005EC in order to improve extrusion coating process ability (motor load and Neck In). SABIC® HDPE F0863 is typically used for food packaging, release paper and photographic paper. Film properties have been measured at cast film of 25 µm. Water vapor permeability at 38 °C and 100 % RH per 24 h. Oxygen permeability at 23 °C and 0 % RH per 24 h. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® HDPE F4520 is typically used for blow molding packaging up to 20 l, combining medium stiffness with a good ESCR. This grade is typically used for packaging of aggressive detergents and technical articles such as spare fuel tanks, air- and cable ducts. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® HDPE FI0750 is a high molecular High Density Polyethylene copolymer grade typically used for blown film applications. SABIC® HDPE FI0750 features are balance between toughness and stiffness, good impact properties with low gel level. This product is not intended for and must not be used in any pharmaceutical/medical applications.

HDPE FI0851P is a high molecular weight high density polyethylene resin designed for blown film applications. This resin has broad molecular weight distribution that makes it easier to process. Films made from this resin exhibit high stiffness, excellent impact and toughness characteristics.