DOW™ LDPE PT 7007 R Polyethylene Resin is a low density polyethylene designed for extrusion coating applications. DOW™ LDPE PT 7007 R Polyethylene Resin has been designed to offer minimum volatile organic carbon (VOC) levels for use in extrusion coating, contributing to low factory emissions and optimal sensory performance. DOW™ LDPE PT 7007 R Polyethylene Resin exhibits: - Excellent draw down. - Good edge stability. - Low neck-in. Applications: - Paper. - Board and foil coatings for packaging. - Food and non-food. DOW™ LDPE PT 7007 R Polyethylene Resin should comply with: - U.S. FDA CFR 177.1520(c)2.2 - EU, No 10/2011 when used unmodified and processed according to good manufacturing practices for food contact applications. Please contact your nearest office regarding food contact compliance statements. The purchaser remains responsible for determining whether the use complies with all relevant regulations. DOW™ LDPE PT 7007 R complies with ISCC PLUS certification for bio-based plastics

DOW™ LDPE PT 7007 REN Polyethylene Resin is a low density polyethylene designed for extrusion coating applications. DOW™ LDPE PT 7007 REN Polyethylene Resin has been designed to offer minimum volatile organic carbon (VOC) levels for use in extrusion coating, contributing to low factory emissions and optimal sensory performance. DOW™ LDPE PT 7007 REN Polyethylene Resin exhibits: - Excellent draw down. - Good edge stability. - Low neck-in. Applications: - Paper. - Board and foil coatings for packaging. - Food and non-food. Complies with: - U.S. FDA CFR 177.1520(c)2.2 - EU, No 10/2011 - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

La résine de polyéthylène DOW PEBD PT 7007 est un polyéthylène basse densité qui convient aux applications d’extrusion laminages. La résine de polyéthylène DOW PEBD PT 7007 a été conçue de façon à contenir un minimum de composés organiques volatiles (COV) pour l’extrusion laminage, contribuant ainsi à de faibles émissions lors de la fabrication et à une performance sensorielle optimale. La résine de polyéthylène DOW PEBD PT 7007 offre les caractéristiques suivantes : - D'excellente caractéristiques au niveau de l'étranglement dû au tréfilage - Excellente réduction du couchage - Faible étranglement dû au tréfilage Note : La résine de polyéthylène DOW PEBD PT 7007 doit être conforme à la norme U.S. FDA CFR 177.1520 (c) 2.2 et avec la plupart des règlementations sur les matériaux en contact alimentaire de la EU, No 10/2011 lorsqu’elle est utilisé sans avoir été modifié qu'elle est transformée selon les règle de l'art de fabrication pour des applications utilisant des matériaux en contact alimentaire. Veuillez vous adresser au bureau de vente Dow le plus proche pour obtenir les déclarations de conformité. Il appartient à l'acheteur de déterminer si l'utilisation du produit est conforme à toutes les règlementations pertinentes Applications : - Papier - Revêtement de carton et de feuille métallique pour emballages - Applications alimentaires et non alimentaires

LDPE SC 7642 R Polyethylene Resin is designed for high speed cast extrusion lines, where it provides excellent draw down, low neck-in and high melt stability with a good balance between stiffness and tear resistance. Due to its density, the coefficient of friction of films made with LDPE SC 7642 R Polyethylene Resin will be lower. In association with DOWLEX* resins, it gives films with a superior balance between machine and cross direction properties. This resin can be readily extruded using conventional cast film techniques, using melt temperatures between 200 and 270 °C. Complies with: - EU No 10/2011 - U.S. FDA 21 CFR 177.1520(c )2.2 - ISCC PLUS certification for renewable-based plastics Consult the regulations for complete details.

LDPE SC 7642 REN Polyethylene Resin is designed for high speed cast extrusion lines, where it provides excellent draw down, low neck-in and high melt stability with a good balance between stiffness and tear resistance. Due to its density, the coefficient of friction of films made with LDPE SC 7642 REN Polyethylene Resin will be lower. In association with DOWLEX* resins, it gives films with a superior balance between machine and cross direction properties. This resin can be readily extruded using conventional cast film techniques, using melt temperatures between 200 and 270 °C. Complies with: - EU No 10/2011 - U.S. FDA 21 CFR 177.1520(c )2.2 - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

LDPE SC 7642 Polyethylene Resin is designed for high speed cast extrusion lines, where it provides excellent draw down, low neck-in and high melt stability with a good balance between stiffness and tear resistance. Due to its density, the coefficient of friction of films made with LDPE SC 7642 Polyethylene Resin will be lower. In association with DOWLEX* resins, it gives films with a superior balance between machine and cross direction properties. This resin can be readily extruded using conventional cast film techniques, using melt temperatures between 200 and 270 °C. Complies with: - EU No 10/2011 - U.S. FDA 21 CFR 177.1520(c )2.2 Consult the regulations for complete details.