BD24250AA is a linear low density polyethylene copolymer containing butene-1 as a co-monomer. BD24250AA is suitable for high flow injection moulding applications such as house wares, boxes and closures. The superior stress crack resistance makes it particularly good for caps and closures. * BD24250AA is suitable for food contact.

HD2840UA is a linear, UV stabilized virgin medium density polyethylene copolymer grade (MDPE), with a narrow molecular weight distribution. Characteristics: - High stiffness. - Good impact stress. - Whiteness. - UV stabilized. - Good Stress Cracking Resistance. - Excellent process-ability. - Excellent internal and external surface finish. Typical applications are: - Rotational moulded items with good stiffness, such as: Septic tanks and Ordinary containers. - Injection moulded technical parts and closure. * HD2840UA is suitable for food contact.

HD3840UA is a linear, UV stabilized virgin medium density polyethylene copolymer grade (MDPE), with a narrow molecular weight distribution. Characteristics: - High stiffness. - Good impact stress. - Whiteness. - UV stabilized. - Good Stress Cracking Resistance. - Excellent process-ability. - Excellent internal and external surface finish. Typical applications are: - Rotational moulded items with good stiffness, such as: Septic tanks and Ordinary containers. - Injection moulded technical parts and closure. * HD3840UA is suitable for food contact.

HD5050EA is a high density polyethylene copolymer grade with a narrow molecular weight distribution, specially developed for injection moulding applications where a good environmental stress-cracking resistance is required. Characteristics: - Good environmental stress cracking resistance. - Good impact strength. - Good weathering resistance. Typical applications are: - Caps & closures. - Technical mouldings. - Bins. - Crates, boxes, household items. * HD5050EA is not suitable for organoleptic applications.

HD5050UA is an ultra-violet light stabilised high density polyethylene copolymergrade with a narrow molecular weight distribution, specially developed forinjection moulding applications where a good resistance to environmental stress cracking is required. Characteristics: - Good environmental stress cracking resistance. - High impact resistance, especially at low temperatures. - Good weathering resistance. Typical applications are: - Large dustbins & pails. - Pallet boxes. - Caps & closures. - Fish crates. - Technical parts. * HD5050UA is suitable for food contact.

HD5211EA is a high density polyethylene copolymer grade with a narrow molecular weight distribution, suitable for a wide range of injection moulding applications. Characteristics: - Good flow. - Good impact strength. Typical applications are: - House wares. - Caps & closures. - Toys. - Pails. - Cartridges. * HD5211EA is not suitable for organoleptic applications.

HD5218EA is a high density polyethylene copolymer grade with a narrow molecular weight distribution, suitable for thin wall injection moulding applications. Characteristics: - High flow. - High warpage resistance. - Suitable for fast cycling applications. Typical applications are: - House wares. - Caps & closures. - Thin walled containers. - PET bottle bases. * HD5218EA is suitable for food contact.

HD5620EA is a high density polyethylene copolymer grade with a narrow molecular weight distribution, suitable for thin wall injection moulding applications. Characteristics: - High flow. - High warpage resistance. - Suitable for fast cycling applications. Typical applications are: -House wares. - Caps & closures. - Thin walled containers. - PET bottle bases. * HD5620EA is suitable for food contact.

HD5740UA is an ultra-violet light stabilised high density polyethylene copolymer grade with a narrow molecular weight distribution, specially developed for injection moulding of heavy duty articles. Characteristics: - High rigidity. - High impact resistance, especially at low temperatures. - Good weathering resistance. Typical applications are: - Large dustbins & pails. - Pallet boxes. - Fish crates. - Technical parts. * HD5740UA is suitable for food contact.

HD5813EA is an easy flow high density polyethylene copolymer grade with a narrow molecular weight distribution, for injection moulding applications. Characteristics: - High flow. - High rigidity. - High warpage resistance. Typical applications are: - House wares. - Aerosol caps, closures. * HD5813EA is suitable for food contact.

HD6070EA is a high density polyethylene grade with a narrow molecular weight distribution, suitable for a wide range of injection moulding applications. Characteristics: - Easy processing. - High rigidity. - Good impact strength - High warpage resistance. Typical applications are: - Caps & closures. - Crates. - Boxes. - Seats. - Pallets. - Structural foam. - Silicon cartridges. * HD6070EA is not suitable for organoleptic applications.

LL0209AA & LL0209KJ are linear low density polyethylene copolymers containing butene-1 as a co-monomer. LL0209AA & LL0209KJ are suitable for general purpose films, neat or in lean blends with LDPE and other ethylene polymers. Lean blends applications include sacks of all types, FFS and agricultural films. In lean blends they offer the following advantages: - Greater draw down. - Improved hot-tack and lower seal shrinkage. - Better tear resistance. - Higher tensile stress and elongation at break. LL0209KJ offers high slip film with easy opening properties when used pure in thickness range 35-100 microns. Addition of other polymers, master batches and pigments or use of other thickness may alter film slip and anti-block performance. If corona treatment is necessary, the level should normally be in the range 38-48 mN/m. LL0209AA & LL0209KJ should be stored in the dry condition below the 50°C and avoided from the exposure of direct sunlight. Recommended melt temperature for extrusion is about 180°C - 225°C. * LL0209AA & LL0209KJ are suitable for food contact.

LL0209CA is a linear low density polyethylene copolymer containing butene-1 as a co-monomer. LL0209CA is suitable for stretch wrap blown films neat or in lean blend with LDPE products. LL0209CA shows good puncher resistance and cling performance. Typical melt temperature range in extruder is about 180°C - 220°C. LL0209CA should be stored in the dry condition below the 50°C and avoided from the exposure of direct sunlight.

LL0220AA is a linear low density polyethylene copolymer containing butene-1 as a co-monomer. LL0220AA has been specially developed for production of hand wrap and other cast stretch films such as oriented tapes. It can also be used as a blending partner in LDPE or LLDPE in both cast and blown film applications. LL0220AA offers the following advantages when it processed by the cast extrusion process: - Good balance of mechanical properties. - Good optical properties. - Good cling performance. LL0220AA also can be used as compounds for low voltage power cable insulation or fibre optic jacketing. LL0220AA should be processed in machinery designed for LLDPE. Melt temperature range in the cast process are normally 240°C-280°C and in lean blends for blown film are 165°C-215°C. LL0220AA should be stored in the dry condition below the 50°C and avoided from the exposure of direct sunlight. * LL0220AA is suitable for food contact.

LL0220CA is a linear low density polyethylene copolymer containing butene-1 as a co-monomer. LL0220CA is suitable for production of cast stretch films. It can also be used as a blending partner in LDPE or LLDPE in both cast and blown film applications. The main characteristic of this grade is high TD tear strength that appropriates it for stretch applications. LL0220CA also can be used as compounds for low voltage power cable insulation or fibre optic jacketing. LL0220CA should be processed in machinery designed for LLDPE. Melt temperature range in the cast process are normally 240°C-280°C and in lean blends for blown film are 165°C-215°C. LL0220CA should be stored in the dry condition below the 50°C and avoided from the exposure of direct sunlight. * LL0220CA is suitable for food contact.

LL0410AA & LL0410KJ are linear low density polyethylene copolymers containing butene-1 as a co-monomer. LL0410AA & LL0410KJ are suitable for thin and stiff blown films because of their good draw down properties. LL0410AA also can be used for applications such as carrier bags and garment wraps. LL0410KJ contains slip and anti-blocking agents for better opening properties. Recommended melt temperature for extrusion is about 180°C - 225°C. LL0410AA & LL0410KJ should be stored in the dry condition below the 50°C and avoided from the exposure of direct sunlight. * LL0410AA & LL0410KJ are suitable for food contact.

LL0640AA & LL0640KJ are linear low density polyethylene copolymers containing butene-1 as a co-monomer. LL0640AA & LL0640KJ have been specially designed for the production of high quality cast films, such as display packaging, bubble film and non cling layer for stretch film. LL0640AA & LL0640KJ have the following advantages: - High melt flow rate for high output cast extrusion. - Excellent combination of strengths and stiffness. - High gloss and clarity. If corona treatment is necessary, the level should normally be in the range 38-48 mN/m. Melt temperature range in the cast process are normally 220°C-260°C and in lean blends for blown film are 160°C-215°C. LL0640AA & LL0640KJ should be stored in the dry condition below the 50°C andavoided from the exposure of direct sunlight. * LL0640AA & LL0640KJ are suitable for food contact.

LL1209AA & LL1209KJ are linear low density polyethylene copolymers containing butene-1 as a co-monomer. LL1209AA & LL1209KJ are suitable for co extrusion blown films with the following advantages: - Improved hot-tack. - Good optical properties. - Low gel level and low odour. - Good substrate adhesion. - Tough core layer. Typical applications for LL1209AA & LL1209KJ are lamination films and heat sealing layers. Also LL1209KJ is highly recommended for display packaging. LL1209KJ offers high slip film with easy opening properties when used pure in thickness range 35-100 microns. Addition of other polymers, master batches and pigments or use of other thickness may alter film slip and anti-block performance. Recommended melt temperature for extrusion is about 180°C-225°C. LL1209AA & LL1209KJ should be stored in the dry condition below the 50°C and avoided from the exposure of direct sunlight. * LL1209AA & LL1209KJ are suitable for food contact.