Riblene AB 10 is a high molecular weight low density polyethylene resin (LDPE) suitable for blown film extrusion. Riblene AB 10 is characterized by a high melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene AB 10 are easily heat shrinkable and characterized by optimum mechanical properties. Main Applications Riblene AB 10 is recommended for the production of greenhouse film, heavy duty shrink film and industrial bags.

Riblene FC 20 BA is characterised by a high melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene FC 20 BA are easily heat shrinkable and characterised by optimum mechanical properties. It is recommended for the production of greenhouse film, heavy duty shrink film and industrial bags. Sustainability The product Riblene FC 20 BA ‘Bio attributed’ is a highly sustainable LDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Riblene FC 20 BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a high molecular weight low density polyethylene resin (LDPE) suitable for blown film extrusion. The production of Riblene FC 20 BA allows to contribute to the circular economy, since the bionafta used derives from renewable resources (e.g. vegetable oils). Riblene FC 20 BA will be bio attributed for 100%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Riblene FC 20 is a high molecular weight low density polyethylene resin (LDPE) suitable for blown film extrusion. Riblene FC 20 is characterised by a high melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene FC 20 are easily heat shrinkable and characterised by optimum mechanical properties. Main Application Riblene FC 20 is recommended for the production of greenhouse film, heavy duty shrink film and industrial bags.

Riblene FC 30 BA is recommended for the extrusion of agricultural films, medium and high loads shrink film, industrial bags. It is characterised by a high melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene FC 30 BA are easily heat shrinkable and characterised by optimum mechanical properties. Sustainability The product Riblene FC 30 BA ‘Bio attributed’ is a highly sustainable LDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Riblene FC 30 BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a high molecular weight low density polyethylene resin (LDPE) suitable for blown film extrusion. The production of Riblene FC 30 BA allows to contribute to the circular economy, since the bionafta used derives from renewable resources (e.g. vegetable oils). Riblene FC 30 BA will be bio attributed for 100%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Riblene FC 30 is a high molecular weight low density polyethylene resin (LDPE) suitable for blown film extrusion. Riblene FC 30 is characterised by a high melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene FC 30 are easily heat shrinkable and characterised by optimum mechanical properties. Main Application Riblene FC 30 is recommended for the extrusion of agricultural films, medium and high loads shrink film, industrial bags.

Riblene FC 39 BA is a high molecular weight low density polyethylene (LDPE) suitable for blown film extrusion. Riblene FC 39 BA is characterised by a high melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene FC 39 BA are easily heat shrinkable and characterised by high rigidity, good mechanical and optical properties. Sustainability The product Riblene FC 39 BA ‘Bio attributed’ is a highly sustainable LDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Riblene FC 39 BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a low-density polyethylene suitable for blown film technology. The production of Riblene FC 39 BA allows to contribute to the circular economy, since the bionafta used derives from renewable resources (e.g. vegetable oils). Riblene FC 39 BA will be bio attributed for 100%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Riblene FC 39 F BA is a high molecular weight low density polyethylene (LDPE) suitable for blown film extrusion. Riblene FC 39 F BA is characterised by a high melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene FC 39 F BA are easily heat shrinkable and characterised by high rigidity, good mechanical and optical properties. Sustainability The product Riblene FC 39 F BA ‘Bio attributed’ is a highly sustainable LDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Riblene FC 39 F BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a low-density polyethylene suitable for blown film technology. The production of Riblene FC 39 F BA allows to contribute to the circular economy, since the bionafta used derives from renewable resources (e.g. vegetable oils). Riblene FC 39 F BA will be bio attributed for 100%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Riblene FC 39 F is a high molecular weight low density polyethylene (LDPE) suitable for blown film extrusion. Riblene FC 39 F is characterised by a high melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene FC 39 F are easily heat shrinkable and characterised by high rigidity, good mechanical and optical properties. Main Application Riblene FC 39 F is recommended for the production of medium rigidity shrink film characterized by good clarity and gloss.

Riblene FC 39 is a high molecular weight low density polyethylene (LDPE) suitable for blown film extrusion. Riblene FC 39 is characterised by a high melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene FC 39 are easily heat shrinkable and characterised by high rigidity, good mechanical and optical properties. Main Application Riblene FC 39 is recommended for the production of medium rigidity shrink film characterized by good clarity and gloss.

Riblene FC 40 F BA is recommended for the production of shrink film for medium and high loads characterized by high rigidity, clarity and gloss. It is characterised by a high melt strength leading to a good bubble stability during extrusion. Sustainability The product Riblene FC 40 F BA ‘Bio attributed’ is a highly sustainable LDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Riblene FC 40 F BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a high molecular weight low density polyethylene (LDPE) suitable for blown film extrusion. The production of Riblene FC 40 F BA allows to contribute to the circular economy, since the bionafta used derives from renewable resources (e.g. vegetable oils). Riblene FC 40 F BA will be bio attributed for 100%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Riblene FC 40 F is a high molecular weight low density polyethylene (LDPE) suitable for blown film extrusion. Riblene FC 40 F is characterised by a high melt strength leading to a good bubble stability during extrusion. Main Application Riblene FC 40 F is recommended for the production of shrink film for medium and high loads characterized by high rigidity, clarity and gloss.

Riblene FD 40 F is a high molecular weight low density polyethylene (LDPE) suitable for blown film extrusion. Riblene FD 40 F has a good compromise between melt strenght and processability. Main Application Riblene XD 40 F is recommended for the production of shrink film for medium and high loads, characterized by high rigidity, clarity and gloss.

Riblene FF 29 is a high molecular weight low density polyethylene (LDPE), suitable for blown film extrusion. Riblene FF 29 is characterised by a good melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene FF 29 are easily heat shrinkable and characterised by good mechanical properties. Main Application Riblene FF 29 is recommended for the production of shrink film for medium loads, for agricultural film and for blend.

Riblene FF 30 BA is characterised by a good melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene FF 30 BA are easily heat shrinkable and characterised by good optical and mechanical properties. Riblene FF 30 BA is recommended for the production of shrink film for medium and light loads, for lamination film and for blend. Sustainability The product Riblene FF 30 BA ‘Bio attributed’ is a highly sustainable LDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Riblene FF 30 BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a high molecular weight low density polyethylene for blown film technology. The production of Riblene FF 30 BA allows to contribute to the circular economy, since the bionafta used derives from renewable resources (e.g. vegetable oils). Riblene FF 30 BA will be bio attributed for 100%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Riblene FF 30 is a high molecular weight low density polyethylene (LDPE), suitable for blown film extrusion. Riblene FF 30 is characterised by a good melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene FF 30 are easily heat shrinkable and characterised by good optical and mechanical properties. Main Application Riblene FF 30 is recommended for the production of shrink film for medium and light loads, for lamination film and for blend.

Riblene FF 33 F is a high molecular weight low density polyethylene (LDPE), additivated with slip agent, ideal for blown film extrusion. Riblene FF 33 F is characterised by a good melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene FF 33 F are easily heat shrinkable and characterised by good mechanical properties. Main Application Riblene FF 33 F is recommended for the production of shrink film for medium and light loads, for lamination film, for carrier bags, for packaging film and for blend.

Riblene FF 33 is a high molecular weight low density polyethylene (LDPE), additivated with slip agent, ideal for blown film extrusion. Riblene FF 33 is characterised by a good melt strength leading to a good bubble stability during extrusion. Main Applications Riblene FF 33 is recommended for the production of shrink film for medium and light loads, for lamination film, for carrier bags, for packaging film and for blend.

Riblene FF 34 F BA is characterised by a good melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene FF 34 F BA are easily heat shrinkable and characterised by good mechanical properties. It is recommended for the production of general packaging film, shoppers, lamination film and blend. Sustainability The product Riblene FF 34 F BA ‘Bio attributed’ is a highly sustainable LDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Riblene FF 34 F BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a low-density polyethylene additivated additivated with slip and antiblocking agent, suitable for blown film technology. The production of Riblene FF 34 F BA allows to contribute to the circular economy, since the bionafta used derives from renewable resources (e.g. vegetable oils). Riblene FF 34 F BA will be bio attributed for 100%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Riblene FF 34 F is a high molecular weight low density polyethylene (LDPE), additivated with slip and antiblocking agent, suitable for blown film extrusion. Riblene FF 34 F is characterised by a good melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene FF 34 F are easily heat shrinkable and characterised by good mechanical properties. Main Application Riblene FF 34 F is recommended for the production of general packaging film, shoppers, lamination film and blend.

Riblene FF 34 I BA is characterised by a good melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene FF 34 I BA are easily heat shrinkable and characterised by good mechanical properties. It is recommended for the production of general packaging film, shoppers, lamination film and blend. Sustainability The product Riblene FF 34 I BA ‘Bio attributed’ is a highly sustainable LDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Riblene FF 34 I BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a low-density polyethylene additivated additivated with slip and antiblocking agent, suitable for blown film technology. The production of Riblene FF 34 I BA allows to contribute to the circular economy, since the bionafta used derives from renewable resources (e.g. vegetable oils). Riblene FF 34 I BA will be bio attributed for 100%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Riblene FF 34 I is a high molecular weight low density polyethylene (LDPE), additivated with slip and antiblocking agent, suitable for blown film extrusion. Riblene FF 34 I is characterised by a good melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene FF 34 I are easily heat shrinkable and characterised by good mechanical properties. Main Application Riblene FF 34 I is recommended for the production of general packaging film, shoppers, lamination film and blend.

Riblene FF 39 F is a high molecular weight low density polyethylene (LDPE), suitable for blown film extrusion. Riblene FF 39 F is characterised by a good melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene FF 39 F are easily heat shrinkable and characterised by good optical and mechanical properties. Main Application Riblene FF 39 F is recommended for the production of shrink film for medium and light loads, for lamination film and for blend.

Riblene FH 20 is a low density polyethylene (LDPE) suitable for blown film extrusion. Riblene FH 20 is characterised by a good balance between processability and mechanical properties. Films manufactured by Riblene FH 20 are easily heat shrinkable and have good optical and mechanical properties. Main Application Riblene FH 20 is recommended for general packaging film and for diapers.

Riblene FH 39 F is a low density polyethylene (LDPE) suitable for blown film extrusion. Riblene FH 39 D-F is characterised by a good balance between processability and mechanical properties. Films manufactured by Riblene FH 39 D-F are easily heat shrinkable and have good optical and mechanical properties. Main Application Riblene FH 39 F is recommended for the extrusion of packaging film, for the production of hygienic and sanitary film and for blends.

Riblene FL 20 R BA is recommended for the extrusion of packaging films, for the production of shrink film for low loads and for blends. It is characterised by a good balance between processability and mechanical properties. Films manufactured by Riblene FL 20 R BA are easily heat shrinkable and have good optical properties. Sustainability The product Riblene FL 20 R BA ‘Bio attributed’ is a highly sustainable LDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Riblene FL 20 R BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a low density polyethylene (LDPE) suitable for blown film extrusion. The production of Riblene FL 20 R BA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Riblene FL 20 R BA will be bio attributed for 100%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Riblene FL 20 R is a low density polyethylene (LDPE) suitable for blown film extrusion. Riblene FL 20 R is characterised by a good balance between processability and mechanical properties. Films manufactured by Riblene FL 20 R are easily heat shrinkable and have good optical properties. Main Application Riblene FL 20 R is recommended for general packaging film, for the production of low gauge and shrink film and for blend.

Riblene FL 23 I BA is recommended for general blown film applications, for the production of shrink film for low loads, also with low thickness, and for lamination film. It is characterised by a good balance between processability and mechanical properties. Films produced with Riblene FL 23 I BA are easily heat shrinkable and they show good optical and mechanical properties. Sustainability The product Riblene FL 23 I BA ‘Bio attributed’ is a highly sustainable LDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Riblene FL 23 I BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a low density polyethylene (LDPE) additivated with slip agent, ideal for blown film extrusion. The production of Riblene FL 23 I BA allows to contribute to the circular economy, since the bionafta used derives from renewable resources (e.g. vegetable oils). Riblene FL 23 I BA will be bio attributed for 100%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Riblene FL 23 I is a low density polyethylene (LDPE) additivated with slip agent, ideal for blown film extrusion. Riblene FL 23 I is characterised by a good balance between proc-essability and mechanical properties. Films manufactured with Riblene FL 23 I are easily heat shrinkable and characterised by good optical and mechanical properties. Main Applications Riblene FL 23 I is recommended for general blown film applications, for the production of shrink film for low loads, also with low thickness, and for lamination film.

Riblene FL 30 I BA, due to its low gels level, is recommended for general blown film applications, for the production of low gauge film, shrink film, in lamination film and for blend. Thanks its high purity is also recommended for the production in high purity film sector. Sustainability The product Riblene FL 30 I BA ‘Bio attributed’ is a highly sustainable LDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Riblene FL 30 I BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a low-density polyethylene suitable for blown film technology. The production of Riblene FL 30 I BA allows to contribute to the circular economy, since the bionafta used derives from renewable resources (e.g. vegetable oils). Riblene FL 30 I BA will be bio attributed for 100%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Riblene FL 30 I is a low density polyethylene (LDPE) ideal for blown film extrusion. Riblene FL 30 is characterised by a good balance between processability, mechanical and optical properties. Films manufactured by Riblene FL 30 are easily heat shrinkable. Main Applications Riblene FL 30 I is recommended for general blown film applications, for the production of shrink film for low loads, also with low thickness, for lamination film and for blend. Due to its peculiarities Riblene FL 30 I is recommended for the production of high purity films.

Riblene FL 34 F BA is recommended for the extrusion of shrink film for low loads, also with low thickness, for lamination film and for blend. Due to its peculiarities, it is recommended for the production of high purity films. It is characterised by a good balance between processability, mechanical and optical properties. Films manufactured by Riblene FL 34 F BA are easily heat shrinkable. Sustainability The product Riblene FL 34 F BA ‘Bio attributed’ is a highly sustainable LDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Riblene FL 34 F BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a low density polyethylene (LDPE), additivated with slip and antiblocking agent, suitable for blown film extrusion. The production of Riblene FL 34 F BA allows to contribute to the circular economy, since the bionafta used derives from waste from renewable resources (e.g. vegetable oils). Riblene FL 34 F BA will be bio attributed for 100%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Riblene FL 34 F is a low density polyethylene (LDPE), additivated with slip and antiblocking agent, suitable for blown film extrusion. Riblene FL 34 F is characterised by a good balance between processability, mechanical and optical properties. Films manufactured by Riblene FL 34 F are easily heat shrinkable. Main Application Riblene FL 34 F is recommended for general blown film applications, for the production of low gauge film and shrink film, and for blend. Riblene FL 34 F, due to its peculiarities, is recommended for the production of high purity films.

Riblene FL 34 I is a low density polyethylene (LDPE), additivated with slip and antiblocking agent, suitable for blown film extrusion. Riblene FL 34 I is characterised by a good balance between processability, mechanical and optical properties. Films manufactured by Riblene FL 34 I are easily heat shrinkable. Main Applications Riblene FL 34 I is recommended for general blown film applications, for the production of low gauge film and shrink film and for blend. Riblene FL 34 I thanks its properties is also recommended for the production of high purity film.

Riblene FL 39 F is a low density polyethylene (LDPE) ideal for blown film extrusion. Riblene FL 39 F is characterised by a good balance between processability, mechanical and optical properties. Films manufactured by Riblene FL 39 F are easily heat shrinkable. Main Application Riblene FL 39 F is recommended for general blown film applications, for the production of low gauge film and shrink film, for lamination and for blend.

Riblene FM 34 F is a low density polyethylene (LDPE), additivated with slip (erucamide) and antiblocking agent, suitable for blown film extrusion. Riblene FM 34 F is characterised by a good balance between processability, mechanical and optical properties. Films manufactured by Riblene FM 34 F are easily heat shrinkable. Main Application Riblene FM 34 F is recommended for general blown film applications, for the production of thin trasparent film, for garment and newspaper packaging, freezer bags and blend. Riblene FM 34 F, due to its peculiarities, is recommended for the production of high purity films.

Riblene FM 34 I is a low density polyethylene (LDPE), additivated with slip (erucamide) and antiblocking agent, suitable for blown film extrusion. Riblene FM 34 I is characterised by a good balance between processability, mechanical and optical properties. Films manufactured by Riblene FM 34 I are easily heat shrinkable. Main Applications Riblene FM 34 I is recommended for general blown film applications, for the production of thin trasparent film, for garment and newspaper packaging, freezer bags and blend. Riblene FM 34 I thanks its properties is also recommended for the production of high purity film.

Riblene FM 50 F is a low density polyethylene (LDPE) suitable for blown film extrusion. Riblene FM 50 F is characterised by optimum optical properties and rigidity. Films manufactured by Riblene FM 50 F are easily heat shrinkable.. Main Applications Riblene FM 50 F is recommended for automatic packaging where low gauge films having a certain rigidity and gloss are required (hygienic packaging).

Riblene FM 52 F is a low density polyethylene (LDPE), additivated with slip and antiblocking agent, suitable for blown film extrusion. Riblene FM 52 F is characterised by optimum optical properties and rigidity. Films manufactured by Riblene FM 52 F are easily heat shrinkable.. Main Applications Riblene XM 52 F is recommended for automatic packaging where low gauge films having a certain rigidity and gloss are required (hygienic packaging).

Riblene FM 53 F is a low density polyethylene (LDPE), additivated with slip and antiblocking agent, suitable for blown film extrusion. Riblene FM 53 F is characterised by optimum optical properties and rigidity. Films manufactured by Riblene FM 53 F are easily heat shrinkable. Main Applications Riblene FM 53 F is recommended for the extrusion of films for automatic packaging and for low thickness rigid films.

Riblene GM 20 R is a medium fluidity low density polyethylene resin (LDPE), obtained from vessel process. Main Application Riblene GM 20 R is suitable for coating applications where a low neck-in is required. Moreover, for its rheological properties, Riblene GM 20 R can be used for injection moulded high thickness articles, caps, closures, stoppers and houseware.