This product is intended for use in injection molding applications for automotive and consumer products and also contains a long term heat aging additive package.

Impact Polypropylene, 10% Glass Reinforced, Natural Color, 10 Melt Flow

Impact Polypropylene, 15% Glass Reinforced, Natural Color, 10 Melt Flow

Impact Polypropylene, 20% Glass Reinforced, Natural Color, 10 Melt Flow

Impact Polypropylene, 25% Glass Reinforced, Natural Color, 10 Melt Flow

Impact Polypropylene, 30% Glass Reinforced, Natural Color, 10 Melt Flow

Impact Polypropylene, 40% Glass Reinforced, Natural Color, 10 Melt Flow

3335 - Prime Impact Copolymer Polypropylene, No Break Features - Superior color and processing stability - Low odor, good flow and set up behavior - Excellent see through clarity Applications - Reusable food containers - House wares - Packaging

300-CA06 is a medium melt flow rate, antistatic and nucleated high rigidity impact copolymer for injection moulding applications. It offers excellent impact resistance and superior flexural modulus. Applications - Toys - Housewares - Pails - Appliances Benefits and Features - Enhanced stiffness & Cycle time - Superior impact/stiffness balance - Antistatic - Excellent processability

3950 is a low gloss, high impact nucleated polypropylene copolymer. It is best suited for automotive interior trim applications and other injection molding applications where high melt fluidity is important.

400-CA25 is an antistatic and nucleated high impact copolymer for injection moulding applications. It offers excellent impact resistance, very high flexural modulus, very good flow properties and very low warpage. New nucleating technology leads to higher isotropy and subsequently lower warpage of the final objects. Benefits & Features - Good flow properties - Enhanced cycle time - Low warpage - Antistatic - Nucleated Applications - Crates&boxes - Pails - Containers - Housewares - Toys

400-CB08 is an antistatic and nucleated high impact copolymer for injection moulding applications. It offers a superior balance of stiffness and impact strength as compared to competitive impact copolymers of similar melt flow. Applications - Crates and other Returnable Transport Packaging - Large pails and containers - Technical mouldings - Stadium seating - Luggage Benefits and Features - Very high impact resistance - Superior impact/stiffness balance

400-GA03 is a high impact copolymer for sheet extrusion and thick wall injection moulding applications. It offers a good balance of stiffness and impact strength as compared to competitive impact copolymers of similar melt flow rate. Applications - Rigid packaging (crates + large containers) - Consumer products - Sheet extrusion and thermoforming - Extrusion blow moulding Benefits and Features - Ultra-high impact resistance - Superior impact/stiffness balance

400-GA05 is a general purpose high impact copolymer for injection moulding applications. It offers a superior balance of stiffness and impact strength as compared to competitive impact copolymers of similar melt flow rate. Benefits & Features - Ultra-high impact resistance - Superior impact/stiffness balance Applications - Appliances - Rigid packaging - Rigid transport packaging - Consumer products - Luggage

Polypropylene - Impact Copolymer Benefits & Features 400-NA01 is a nucleated low melt flow rate, very high impact copolymer for demanding industrial applications. This nucleated grade allows a faster cooling and excellent dimensional stability. It offers a superior balance of stiffness and impact strength and low gel content compared to competitive impact copolymers of similar melt flow rate. - Improved impact / stiffness balance - Very low gel content - Superior surface quality - Superior processability Applications - Corrugated sheet (twin walled sheet) - Corrugated pipe and fittings - Sheets for thermforms - Injection moulding

Benefits & Features - Improved stiffness - High impact - Good flowability - Antistatic - Controlled rheology Applications 401-CB50 is a nucleated and antistatic high flow and high impact copolymer ideally suited for fast cycling, thin walled injection moulded applications. - Rigid packaging - Yellow fat containers - Ice cream containers - Housewares - Appliances

401-NA01 is a nucleated low melt flow rate, very high impact copolymer for demanding industrial applications. This nucleated grade allows a faster cooling and excellent dimensional stability. It offers a superior balance of stiffness and impact strength and low gel content compared to competitive impact copolymers of similar melt flow rate. Applications - Corrugated sheet (twin walled sheet) - Corrugated pipe and fittings - Sheets for thermforms - Injection moulding Benefits and Features - Improved impact / stiffness balance - Very low gel content - Superior surface quality - Superior processability

401-NA06 is a high impact block copolymer for general purpose injection moulding applications. Applications - Crates and large pails - Transit packaging - Toys Benefits and Features - A nucleated high impact copolymer for general purpose injection moulding applications

402-CB12 is an antistatic and nucleated high impact copolymer for injection moulding applications. It offers excellent impact resistance, superior flexural modulus, very good flow properties and low warpage. Benefits & Features - Good flow properties - Enhanced cycle time - Low warpage - Antistatic - Nucleated Applications - Pails - Containers - Crates - Housewares - Toys

500-GA20 is a high melt flow rate and very high impact copolymer for injection moulding applications. Benefits & Features - Very high impact resistance - Very good thermal stability Applications - Consumer products - Housewares - Containers, car batteries - Toys, compounds

500-NA01 is a low melt flow rate impact copolymer for demanding industrial applications. It offers an enhanced impact strength while keeping a high stiffness. This nucleated grade also allows a faster cooling and has a good long term stability. Applications - Corrugated pipes / conduit pipes - Twin-wall sheets - Fittings - Sheets for thermforming - Injection moulding Benefits and Features - Improved impact resistance (while keeping a high stiffness) - Very low gel content - Superior processability

Polypropylene – Impact Copolymer Benefits & Features 540-NA08 is a very high impact copolymer recommended for injection moulding as well as for the production of compounds. 540-NA08 is food contact approved (EU and FDA). 540-NA08 presents: - Very good impact resistance at low temperature (-20°C) - Low warpage - Good stiffness Applications - Compounds - Housewares - Toys - Cold storage crates - Luggage

Polypropylene - Impact Copolymer Benefits & Features 540-NA13 is a very high impact copolymer recommended for injection moulding of luggage, crates & boxes as well as for the production of compounds. This nucleated grade has a good stiffness, allows for a faster cooling and presents excellent dimensional stability. 540-NA13 presents - Very good impact resistance at low temperature (-20°C) - Low warpage - Good flowability Applications - Returnable transport packaging (crates & boxes) - Luggage - Very low temperature impact resistant packages - Compounds

Polypropylene - Impact Copolymer Benefits & Features 540-NA20 is a very high impact copolymer, high flow recommended for injection moulding as well as for the production of compounds. 540-NA20 complies with EU food legislation but does not meet FDA requirements (21CFR 177.1520). 540-NA20 presents: - Very good impact resistance at low temperature (-20°C) - Low warpage - High flowability Applications - Compounds (automotive and appliances) - Luggage

Polypropylene - Impact Copolymer Benefits & Features 540-NA25 is a very high impact copolymer, high flow recommended for injection moulding as well as for the production of compounds. 540-NA25 complies with EU food legislation but does not meet FDA requirements (21CFR 177.1520). 540-NA25 presents: - Very good impact resistance at low temperature (-20°C) - Low warpage - High flowability Applications - Compounds (automotive and appliances) - Luggage

Polypropylene - Impact Copolymer Benefits & Features 540-NA30 is a very high impact copolymer, high flow recommended for injection moulding as well as for the production of compounds. 540-NA30 complies with EU food legislation but does not meet FDA requirements (21CFR 177.1520). 540-NA30 presents: - Very good impact resistance at low temperature (-20°C) - Low warpage - High flowability Applications - Compounds (automotive and appliances) - Luggage

Polypropylene - Impact Copolymer Benefits & Features 540-NA60 is a very high impact copolymer, high flow recommended for injection moulding as well as for the production of compounds. 540-NA60 complies with EU food legislation but does not meet FDA requirements (21CFR 177.1520). 540-NA60 presents: - Good impact resistance at low temperature (-20°C) - Low warpage - High flowability Applications - Compounds (automotive and appliances)

L10G-00 is a medium melt flow rate, barefoot impact copolymer polypropylene designed for injection molding, compounding applications, and consumer products. Characteristics of this grade include high impact resistance and high flexural modulus. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

L12N-00 is a medium melt flow rate, nucleated impact copolymer polypropylene for injection molding and compounding applications. It is especially formulated for high impact resistance, high flexural modulus, and excellent gloss. Applications include automotive, consumer products, housewares, and compounding. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

L12Z-00 is a nucleated, antistated impact copolymer with an excellent balance of high stiffness, good impact and fast injection cycles intended for use in the production of consumer products, appliances, office furniture, toys and juvenile products. This material has been recognized by UL for sustained use at 65°C and meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

L12Z-01 is a nucleated, antistated polypropylene impact copolymer with an excellent balance of stiffness and impact and fast injection cycles. It is specially formulated to help provide superior gloss in applications such as consumer products, housewares, and toys. This material has been recognized by UL for sustained use at 65°C and meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

Grade L34N-00 is a low gloss and high impact nucleated polypropylene copolymer. It is designed for high speed injection molding applications and/or for compounding where high melt-state fluidity is required. This material meets the requirements of the US Food and Drug Administration as specified in 21 CFR 177.1520. Please see the L34N-00 Regulatory Position Statement for additional details.

L70Z-01 is a nucleated and antistatic high flow polypropylene medium impact copolymer designed for thin walled injection molding applications and closures. This product meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

N00M-00 is a fractional melt flow rate, medium term heat aging high impact copolymer polypropylene for blow molding, pipe, tubing and sheet extrusion applications. It offers a superior balance of stiffness and impact strength as compared to competitive impact copolymers of similar melt flow rate. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520. This product is not recommended for taste or odor sensitive applications.

N00N-00 is a fractional melt flow rate high impact copolymer polypropylene specifically designed for non-pressure structured wall pipe but can also be used in other extrusion applications requiring high melt strength and high stiffness. It offers a superior balance of stiffness and impact strength as compared to competitive impact copolymers of similar melt flow rate.

N01N-00 is a high stiffness, impact copolymer specially designed for freezer-to-microwave performance. This extrusion grade resin exhibits an excellent balance of impact and stiffness properties, and combines high heat resistance with good gloss and thermoformability. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

N02G-00 is a low melt flow rate, high-impact copolymer polypropylene for sheet extrusion and thick wall injection molding applications. It offers a superior balance of stiffness and impact strength as compared to competitive impact copolymers of similar melt flow rate range. Typical applications include appliances, automotive, compounding, consumer products, housewares, and rigid packaging. Benefits include enhanced impact and stiffness. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

N05U-00 is an extrusion-grade nucleated impact copolymer polypropylene resin designed for fiber optic buffer tube applications in the protection of glass fibers. N05U-00 has an excellent impact/stiffness property balance and provides the high compression strength required to meet the Bellcore GR-20-CORE standard (Generic Requirements for Optical Fiber and Fiber Optic Cable).

N12N-00 is a medium melt flow rate, nucleated polypropylene impact copolymer designed for injection molding and compounding applications. The grade benefits from a high stiffness and high impact resistance at both room and low temperatures. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.