SABIC® PP 412MN40 is a multi-purpose grade with good flow properties, combining stiffness and good balance in impact strength. The material has a very low tendency for warpage and is typically used for the production of thin wall packaging articles. Cycle times can be very short. It is formulated with a combined processing and antistatic additive package. This grade is widely applied in thin wall technical injection moulded articles and thin-walled containers, in particular where dimensional stability is important. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com) / IMDS 80775790

SABIC® PP 413MNK45 is a controlled rheology PP grade with a very high fluidity. It is provided with an antistatic and nucleating agent package. This grade has a good impact – stiffness balance.

SABIC® 46MNK45 is a phthalate free polypropylene impact copolymer grade suitable for both injection and compression molding of beverage closures. The main features of this grade are very good processability, good stiffness and impact resistance. This is a nucleated grade with slip and antistatic agent.

SABIC® PP 48M10 has good flow characteristics, high stiffness and good impact strength. It is typically used for articles with complex shapes, such as crates and boxes, rigid packaging and components for the automotive and electro-technical industries. This grade is also available with an antistatic additive package, namely SABIC® PP 48M40. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com). IMDS 80775790

SABIC® PP 48M40, a multi-purpose grade, has good flow characteristics, high stiffness and good impact strength. It is formulated with a combined processing and antistatic additive package. It is typically used for articles with complex shapes, such as crates and boxes, rigid packaging and components for the automotive and electro-technical industries. This grade is also available without an antistatic additive package, namely SABIC® PP 48M10. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com) IMDS 80775790

SABIC® PP 48MK40 is specially developed for producing injection molded articles. This grade contains nucleating and antistatic agents. It has medium flow properties, good impact resistance (even at low temperature) and balanced stiffness.

SABIC® PP 49MCX40 is a high crystalline impact copolymer with outstanding mechanical properties. The product features an easy processability, an excellent combination of stiffness and impact strength and good gloss. SABIC® PP 49MCX40 is a single component solution for high stiffness injection molding applications that is typically used by customers as replacement of ABS and HIPS in small appliances. This grade is also used by customers in a wide range of appliances, such as housings for electrical appliances, furniture and technical components.

SABIC® PP 49MK45 is specially developed for producing injection molded articles. This grade contains nucleating & antistatic agents. It has medium flow properties and excellent impact - stiffness balance.

SABIC® PP 511MK40T is a high fluidity polypropylene impact copolymer with high stiffness and medium impact strength. It contains nucleating & antistatic agents.

SABIC® PP 511MK41T is a high fluidity polypropylene impact copolymer with excellent dimensional stability, low warpage, high stiffness and medium impact strength. It contains nucleating & antistatic agents.

SABIC® PP 511MK46 is specially developed for producing injection molded articles. This grade contains nucleating & antistatic agents. It has medium-high flow properties in combination with excellent impact / stiffness balance and excellent organoleptic properties. SABIC® PP 511MK46 encompasses the following features: excellent top load strength & down gauging potential; excellent impact resistance; excellent isotropic shrinkage performance (dimensional stability); high crystallization temperature and excellent flow behavior (lower cycle time); clean product in combination of low / no odor & taste.

SABIC® PP 512MN10 has excellent flow properties and a good combination of high impact strength and stiffness. It is widely used in articles where good processability, high toughness and a low warpage are required, e.g. vacuum-cleaner housings, large size flower pots, foodstuff containers and ice-cream containers. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com) IMDS 80775790

SABIC® PP 513MN40 is a controlled rheology PP grade with very high fluidity. It contains an antistatic agent and especially developed for producing injection molded articles. This grade has a good impact resistance even at low temperature.

SABIC® PP 513MNK40T is a very high fluidity polypropylene impact copolymer with high stiffness and medium impact strength. It contains nucleating & antistatic agents.

SABIC® PP 55M10 is a low fluidity polypropylene impact copolymer suitable for injection moulding applications. The product exhibits very high impact strength even at low temperature combined with a good stiffness. .

SABIC® PP 56M10 has high impact resistance, even at low temperatures, and high stiffness. It is typically used in a variety of applications e.g. containers and crates & boxes. It is also used in automotive components, like for example battery cases. Health, Safety and Food Contact regulations:Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com). IMDS 80775790

SABIC® PP 56M65 is specially developed for producing injection molded articles requiring a good resistance to long term heat exposure. This grade contains high heat stabilizer additive & has good heat aging resistance and good impact - stiffness balance.

SABIC® PP 57MNK10 is a controlled rheology PP grade and specially developed for producing injection molded articles. This grade has excellent impact resistance (even at low temperature) and balanced stiffness.

SABIC® PP 57MNK40 is a controlled rheology PP grade and specially developed for producing injection molded articles. This grade contains nucleating & antistatic agents. It has excellent impact resistance (even at low temperature) and balanced stiffness.

This grade combines an excellent stiffnesswith high impact resistance. It has a low tendency to warp. Excellent flow in combination with high crystallisation speed enables outstanding processability aiming at easy mould filling and short cycle times. Thanks to the mentioned performance this grade is typically used in several kinds of containers. The excellent gloss level makes this material also favourable for household applications. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.comThis product is not intended for and must not be used in any pharmaceutical/medical applications. This grade material is UL registered under File E111275 (www.ul.com). IMDS 80775790

SABIC® PP 64M40T is a low fluidity polypropylene impact copolymer with high impact strength and medium stiffness. It contains antistatic agents.

SABIC® PP 66M10T is a low fluidity polypropylene impact copolymer with good processability, high impact strength and medium stiffness. It contains antistatic agents.

This grade combines a very high impact strength, even at low temperatures, with a high stiffness and low flow properties. It is typically used for extrusion of flat sheets, corrugated board and corrugated pipes. Health, Safety and Food Contact regulations: Safety Data Sheets (SDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical / medical applications. This grade material is UL registered under File E111275 (www.ul.com). IMDS 80775790

This grade combines a very high impact strength, even at low temperatures, with a high stiffness and moderate flow properties. It is typically used by our customers for injection moulding of technical components and containers exposed to heavy loads and needing a high toughness. It is typically used by our customers for extrusion applications like thin sheet, corrugated board and profiles. Health, Safety and Food Contact regulations: Safety Data Sheets (SDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical / medical applications. This grade material is UL registered under File E111275 (www.ul.com). IMDS ID: 80775790

SABIC® PP 86MF97 is a grade which is characterised by an optimum combination of stiffness, impact resistance and flow. It is highly UV-stabilised, and therefore commonly used for exterior applications such as car bumpers. SABIC® PP 86MF97 is a designated automotive grade. IMDS ID: 80775790

SABIC® PP 87MK40T is a medium fluidity polypropylene impact copolymer with very high impact strength and high stiffness. It contains nucleating & antistatic agents.

SABIC® PP 88MK40T is a medium fluidity polypropylene impact copolymer with very high impact strength and high stiffness. It contains nucleating & antistatic agents.

SABIC® PP 95MK40T is a polypropylene impact copolymer with very high impact strength, high stiffness and high heat deflection temperature. It is specifically designed for applications that require high impact resistance and high top load strength at broad temperature range. It contains nucleating & antistatic agents.

SABIC® PP FPC100 has been developed as a new member of the SABIC® PP FLOWPACT range dedicated to the thin wall packaging market. It is nucleated and is characterized by a high crystallization temperature and excellent flow behaviour in combination with a nice stiffness to impact balance. This grade is typically used for high-speed injection moulding and it enables very cost efficient processing on the basis of easy mould filling and very short cycle times. It has a very good antistatic performance and permitseasy demoulding.This material is typically used in thin wall packing applications both for food and non-food segments. This includes yellow fats/margarine tubs, dairy packaging and housewares. The grade has an excellent dimensional stability what is crucial for the thin wall packaging market. Health, Safety and Food Contact regulations:Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.comThe product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. IMDS 80775790

This grade has been developed as a new member of the SABIC® PP FLOWPACT range dedicated to the rigid packaging market. It delivers a high top load performance (potential downgauging) with a superior stiffness / impact balance. It is nucleated and is characterized by a high crystallization temperature and excellent flow behavior. This grade is typically used by our customers for high-speed injection moulding and it enables very cost efficient processing on the basis of easy mould filling and very short cycle times. It has a very good antistatic performance with easy demoulding.Application: This material is typically used in rigid packaging applications for both food and non-food industries. This includes packaging for yellow fats, cheese spreads, dairy, frozen, chilled and ambient food, household chemicals, paints among others. It can be also used in several applications in the caps & closures industry as well in housewares. The grade has excellent heat deflection temperature making it may particularly be used for hot fill applications. Health, Safety and Food Contact regulation: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC-com. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications.

As part of SABIC® PP FLOWPACT portfolio, FPC70 delivers high top load performance (potential downgauging) with a superior stiffness / impact balance. It is nucleated and has good antistatic performance with easy demoulding. This grade has good flow behavior, and it is typically used by our customer for high-speed injection moulding process, potentially enabling very cost efficient processing on the basis of easy mould filling and very short cycle times. Applications: SABIC® PP FPC70 is typically used in rigid packaging applications for both food and non-food industries. This includes packaging for yellow fats, cheese spreads, dairy, frozen, chilled and ambient food, household chemicals and paints among others. It can be also used in several applications in the caps & closures as well in housewares. The grade has excellent heat deflection temperature making it may particularly be used for hot fill applications. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® PP FPC70T is part of the SABIC® PP FLOWPACT portfolio dedicated for thin wall packaging application. It offers very high melt flow rate along with good stiffness / impact balance enable very fast production speed while maintain good product integrity. It is designed to have good organoleptic performance to minimize potential taste and smell transfer to the food contents. SABIC® PP FPC70T also has very good impact resistance even at low temperature. This make it particularly suitable for the production of ice cream container, yoghurt tub, margarine container and other thin wall packaging for low temperature storage.

SABIC® PP PHC26 combines very high impact resistance, also at low temperatures, with high stiffness and offers good flow properties. Thanks to the very low tendency to warp and the excellent surface quality, SABIC® PP PHC26 is typically used in injection moulding of suitcase shells, crates & boxes and automotive parts. Health, Safety and Food Contact regulations:Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. IMDS 80775790

SABIC® PP PHC27 combines very high impact resistance, also at low temperatures, with a good stiffness and offers very good flow properties. Thanks to very low tendency to warp, it is typically used for injection moulding of crates & boxes, suitcase shells and automotive parts. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com) / IMDS 80775790

SABIC® PP PHC28 is the new development of SABICs very high impact PHC series. The grade combines very high impact resistance, also at low temperatures, with a good stiffness and offers very good flow properties. By its design it is offering potential of cycle time reduction, of down gauging and easiness of processing. PHC28 is typically used for injection moulding of applications requiring high impact from low to thick wall thickness such as suitcase shells, electronic equipment and automotive parts. SABIC® PP PHC28 is putting the combined stiffness and flow of very high impact copolymers to a next level. Health, Safety and Food Contact regulations:Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® PP PHC31 combines high stiffness with good impact strength. Its excellent flow properties and narrow molecular weight distribution allows fast cycle-times and injection moulding of articles demanding low warpage and high dimensional stability. Typical applications are pails, containers, crates & boxes and automotive components. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com)IMDS ID: 80775790.

SABIC® PP PHC31-81 is a grade which combines high stiffness with good impact strength. Its excellent flow properties and narrow molecular weight distribution permits fast cycle-times and injection moulding of articles demanding low warpage and high dimensional stability. This grade is formulated with a combined processing and UV-stabilisation package. Typical applications are automotive components. It is also available in a general purpose additive package. SABIC® PP PHC31-81 is a designated automotive grade. IMDS ID: 80775790

SABIC® PP PPA20 is an impact copolymer with an excellent optical performance – high gloss, high scratch resistance and low stress whitening. The material exhibits high flow and impact resistance combined with high stiffness. The overall properties make this grade favorable for various applications where a good balance of mechanical and optical properties are required such as home appliances, caps and closures, houseware, food and non-food rigid packaging and furniture. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com This product is not intended for and must not be used in any pharmaceutical/medical applications.

This impact copolymer has a high molecular weight and is provided with a long-term heat stabilisation package. It exhibits high stiffness in combination with very high impact strength even at low temperatures. This material is typically used for extrusion of sewage pipe applications and can also be typically used for blow-moulding of large containers and sheet extrusion. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com This grade material is UL registered under File E111275 (www.ul.com) IMDS 80775790

Safron® C142-01N Polypropylene Resin is a nucleated high impact copolymer especially suited for twin walled sheet applications. Its good compressive strength combined with flexibility for easy stamping out of complex shapes, renders it useful for a wide variety of applications. It is also suitable for profile extrusion. Safron® C142-01N Polypropylene Resin can also be used for the injection moulding of technical parts requiring exceptional thoughness, especially at low temperatures. Typical Applications - Twin walled sheet - Technical injection moulded pans - Solid sheet and profile extrusion