DW100 - 8229 is a 10% glass-filled polypropylene compound intended for injection moulding. The product is available in natural (DW100), but other colours can be provided on request. The good flow ability of DW100 - 8229 makes it very easy to process even for complicated parts with long flow paths and it offers very high productivity with short cycle times. DW100 - 8229 is formulated to give an excellent surface finish. APPLICATIONS - Aesthetic parts - Appliance moulding - Aesthetic parts - House wares - Miscellaneous electrical components Products requiring rigidity, shrinkage and good dimensional stability can suitably be made from DW100 - 8229.

DW254 is a 25% glass fiber/mineral polypropylene compound intended for injection moulding. The product is available in both natural (DW254) and black (DW254-8229) but other colours can be provided on request. DW254 has been developed especially for the furnitures, sport, leisures applications . This product is antistatic and UV stabilised. DW254 makes it very easy to process even for complicated parts with long flow paths and it offers very high productivity with short cycle times. DW254 is formulated to give an excellent surface finish. APPLICATION Products requiring good rigidity, low shrinkage, high dimensional stability can suitably be made from DW254.

DW305 - 8090 is a 30% mineral reinforced polypropylene compound intended for injection moulding. The product is available in both black (DW305 - 8229) and natural (DW305) but other colours can be provided on request. DW305 - 8090 has been developed especially for the automotive applications, to be used in interior parts requiring excellent scratch resistance. APPLICATIONS Products has an excellent balance between the impact strength and stiffness can suitably be made from DW305 - 8090. - Dashboard - Door panels and pockets - Consoles

DW360 - 8229 is a 30% glass - filled polypropylene compound intended for injection moulding. The product is available in both black (DW360 - 8229) and natural (DW300) but other colours can be provided on request. DW360 - 8229 has been developed especially for the automotive applications and electrical components. The good flowability of DW360 - 8229 makes it very easy to process even for complicated parts with long flow paths and it offers very high productivity with short cycle times. DW360 - 9229 is formulated to give an excellent surface finish with good scuff resistance. APPLICATIONS Products requiring good rigidity, low shrinkage, high dimensional stability can suitably be made from DW360 - 8229.

DW374 - 8229 is a 30% glass fiber/bead filled polypropylene copolymer compound intended for injection moulding. The product is available in both black (DW374 - 8229) and natural (DW374) but other colours can be provided on request. DW374 - 8229 has been developed especially for the automotive applications and electrical components. DW374 - 8229 makes it very easy to process even for complicated parts with long flow paths and it offers very high productivity with short cycle times. DW374 - 8229 is formulated to give an excellent surface finish. APPLICATION Products requiring good rigidity, low shrinkage, high dimensional stability can suitably be made from DW374 - 8229.

DW400 is a 40% glass - filled polypropylene compound intended for injection moulding. The product is available in both black (DW400 - 8229) and natural (DW400) but other colours can be provided on request. DW400 has been developed especially for the automotive applications and electrical components. The good flowability of DW400 makes it very easy to process even for complicated parts with long flow paths and it offers very high productivity with short cycle times. DW400 is formulated to give an excellent surface finish with good scuff resistance. APPLICATIONS Products requiring good rigidity, low shrinkage, high dimensional stability can suitably be made from DW400.

DW401HB - 8229 is a 40% glass fibre/bead reinforced polypropylene chemically coupled compound intended for injection moulding. The product is available in both natural (DW401HB) and black (DW401HB - 8229) but other colours can be provided on request. DW401HB - 8229 has been developed especially for the automotive applications and electrical components. APPLICATIONS Products requiring good long term heat resistance, high heat distortion temperature, rigidity, low shrinkage and high dimensional stability be made from DW401HB - 8229.

MAJORIS DW434X/8 is a high performance reinforced polypropylene compound intended for injection moulding. APPLICATIONS MAJORIS DW434X/8 is intended for components that require good impact strength, rigidity and dimensional stability. Suitable applications are: - Electrical tool and appliance components - Miscellaneous automotive technical items - Household articles

MAJORIS DW444X/8 is a high performance reinforced polypropylene compound intended for injection moulding. APPLICATIONS MAJORIS DW444X/8 is intended for components that require good impact strength, rigidity and dimensional stability. Suitable applications are: - Electrical tool and appliance components - Miscellaneous automotive technical items - Household articles

DW464 is a 40% glass fiber/bead filled polypropylene copolymer compound intended for injection moulding. The product is available in both natural (DW464) and black (DW464-8229) but other colours can be provided on request. DW464 has been developed especially for the automotive applications and electrical components. DW464 makes it very easy to process even for complicated parts with long flow paths and it offers very high productivity with short cycle times. DW464 is formulated to give an excellent surface finish. APPLICATION Products requiring good rigidity, low shrinkage, high dimensional stability can suitably be made from DW464.

DW650 - 8229 65% mineral filled polypropylene compound intended for injection moulding. The product is available in natural (DW650) but other colours can be supplied on request. DW650 - 8229 has been developed for applications where high density and high stiffness, good surface finish and good flow properties are necessary. APPLICATIONS High density products, such as : - Sound absorption parts - Electronic housings - Cosmetics mouldings - Appliances

MAJORIS DWB304X is ultra low weight reinforced polypropylene compound intended for injection moulding. The product is available in natural, but other colours can be provided on request. MAJORIS DWB304X has been developed especially for demanding applications in automotive industry and various engineering sectors. MAJORIS DWB304X has very low density, high rigidity, good dimensional stability and good aspect surface. APPLICATIONS Products requiring low density and high mechanical properties.

EB310 is a natural, 30% mineral filled polypropylene compound intended for injection moulding. The product is available in natural (EB310) and black (EB310 - 8229) but other colours can be supplied on request. EB310 has been developed for applications where high density, good impact strength, good surface finish and good flow properties are necessary. APPLICATIONS High density products, such as: - Sound absorption parts - Electronic housings - Cosmetics mouldings - Appliances

EB550 is a natural, 55% mineral filled polypropylene compound intended for injection moulding. The product is available in natural (EB550) and black (EB550 - 8229)but other colours can be supplied on request. EB550 has been developed for applications where high density, good surface finish and good flow properties are necessary. APPLICATIONS High density products, such as: - Sound absorption parts - Electronic housings - Cosmetics mouldings - Appliances

EB608 is a natural, 65% mineral filled polypropylene compound intended for injection moulding. The product is available in natural (EB608) and black (EB608 - 8229) but other colours can be supplied on request. EB608 has been developed for applications where high density, good surface finish and good flow properties are necessary. APPLICATIONS High density products, such as: - Sound absorption parts - Electronic housings - Cosmetics mouldings - Appliances

EB619 is a natural, 65% mineral filled polypropylene compound intended for injection moulding. The product is available in natural (EB619) but other colours can be supplied on request. EB619 has been developed for applications where high density, good impact strength, good surface finish and good flow properties are necessary. APPLICATIONS High density products, such as: - Sound absorption parts - Electronic housings - Cosmetics mouldings - Appliances

EB 650 - 1199 is a white, 60% mineral filled polypropylene compound intended for injection moulding. The product is available in black (EB650-8229) and natural (EB650) but other colours can be supplied on request. EB 650 WHITE 1199 has been developed especially for the automotive applications requiring very good sound insulation properties. APPLICATIONS Automotive components: - Parts requiring noise absorption - Electronic housings - Air ducts - Parts between engine and interior compartment EB 650 - 1199 gives excellent properties for the parts requiring excellent rigidity, low shrinkage and high dimensional stability.

EB651 - 8229 is a black, 60% mineral filled polypropylene compound intended for injection moulding. The product is available in black (EB651 - 8229) and natural (EB651) but other colours can be supplied on request. EB651 - 8229 has been developed especially for the automotive applications requiring very good sound insulation properties. APPLICATIONS Automotive components: - Parts requiring noise absorption - Electronic housings - Air ducts - Parts between engine and interior compartment EB651 - 8229 gives excellent properties for the parts requiring very good long term heat resistance, high heat distortion temperature, excellent rigidity, low shrinkage and high dimensional stability.

EB652 - 1199 is a white, 60% mineral filled polypropylene compound intended for injection moulding. The product is available in black (EB652-8229) and natural (EB652) but other colours can be supplied on request. EB652 - 1199 has been developed especially for the technical applications requiring very good sound insulation properties. APPLICATIONS Automotive components: - Parts requiring noise absorption - Parts between engine and interior compartment - Technical components EB652 - 1199 gives excellent properties for the parts requiring excellent rigidity, low shrinkage and high dimensional stability with good antistatic performance.

EB669 is a natural, 65% mineral filled polypropylene compound intended for injection moulding. The product is available in natural (EB669) but other colours can be supplied on request. EB669 has been developed for applications where high density, good impact strength, good surface finish and good flow properties are necessary. APPLICATIONS High density products, such as: - Sound absorption parts - Electronic housings - Cosmetics mouldings - Appliances

EB710 is a natural, 70% mineral filled polypropylene compound intended for injection moulding. The product is available in natural (EB710) and black (EB710 - 8229) but other colours can be supplied on request. EB710 has been developed for applications where high density, good surface finish and good flow properties are necessary. APPLICATIONS High density products, such as: - Sound absorption parts - Electronic housings - Cosmetics mouldings - Appliances

EB730 is a polypropylene filled with 75% of mineral filler and it is intended for injection moulding. The product is available in natural colour (EB730) and other colours can be provided on request. EB730 has been developed for applications where high density, good surface finished and good flow properties are necessary. APPLICATIONS High density products, such as: - Sound absorption parts - Electronic housings - Cosmetics mouldings - Appliances

EB760 is a natural, 70% mineral filled polypropylene compound intended for injection moulding. The product is available in natural (EB760) and black (EB760 - 8229) but other colours can be supplied on request. EB760 has been developed for applications where high density, good impact strength, good surface finish and good flow properties are necessary. APPLICATIONS High density products, such as: - Sound absorption parts - Electronic housings - Cosmetics mouldings - Appliances

EB810 is a natural mineral filled polypropylene compound intended for injection moulding. The product is available in natural (EB810) and black (EB810 - 8229) but other colours can be supplied on request. EB810 has been developed for applications where high density, good surface finish and good flow properties are necessary. APPLICATIONS High density products, such as: - Sound absorption parts - Electronic housings - Cosmetics mouldings - Appliances

EC200 - 1199 is a 20% mineral filled polypropylene compound intended for injection moulding, calendering technology. The product is available in natural (EC200) and black (EC200 - 8229) but other colours can be supplied on request. EC200 - 1199 is intended for component, which require very good surface quality, and high dimensional stability. APPLICATIONS - Electrical appliances - Household articles - Technical components - Rolling cast film

EC325 - 1298 is a white, 30% mineral filled polypropylene compound intended for injection moulding. The product is available in natural (EC325) and black (EC325 - 8229) but other colours can be supplied on request. EC325 - 1298 is intended for component, which require very good surface quality and antistatic properties, rigidity, low shrinkage and high dimensional stability. APPLICATIONS - Electrical appliances - Household articles - Technical components

EC380 is a polypropylene 35% mineral filled polypropylene compound intended for injection moulding. The product is available in natural EC380 but other colours can be provided on request. EC380 has been developed especially for automotive and household appliances parts that require excellent balance between the impact strength and stiffness and very good surface quality. APPLICATIONS - Automotive interior parts - Handles - Household appliances - Technical components

EC401 - 8229 is a black, 40% mineral filled polypropylene compound intended for injection moulding. The product is available in natural (EC401) and black (EC401 - 8229) but other colours can be supplied on request. EC401 - 8229 is intended for component, which require good surface quality and high heat stabilised properties, rigidity, low shrinkage and high dimensional stability. APPLICATIONS - Electrical appliances - Household articles - Technical components

EE081 is a elastomer modified polypropylene compound intended for injection moulding. The product is available in black (EE081 - 8229) and natural (EE081) but other colours can be provided on request. EE081 has a very easy flowing and very good process ability. APPLICATIONS - Injection moulded parts.

EE097 - 7803 is a 8 % mineral filled polypropylene compound intended for injection moulding. EE097 - 7803 has been developed especially for the automotive parts, requiring good impact strength/stiffness, very good scratch resistance and UV stabilised. The product is available in natural (EE097) but other colours can be provided on request. APPLICATIONS - Automotive parts

EE107 - 7803 is a 10% mineral filled polypropylene compound intended for injection moulding. EE107 - 7803 has been developed especially for the automotive parts, requiring good impact strength/stiffness, very good scratch resistance and UV stabilised. The product is available in black (EE107 - 8229) and natural (EE107) but other colours can be provided on request. APPLICATIONS Automotive parts

EE115T - 8938 is a mineral reinforced, elastomer modified polypropylene compound intended for injection moulding. EE115T - 8938 has a controlled thermal expansion, suitable for high flow path/wall thickness ratios and gives a very nice surface. Thus suitable for exterior parts with reduced wall thickness. The product is UV stabilised. The product is available in dark grey (EE115T - 8938) and natural (EE115T) but other colours can be provided on request. EE115T - 8938 gives excellent paint ability by use of adhesive primers alone, or by use of other pre-treatments. APPLICATIONS - Automotive exterior. - Bumper covers, spoilers and exterior trims. - Parts where controlled thermal expansion is needed. - Painted parts

EE165 - 1791 is a 15% mineral filled polypropylene elastomer modified compound intended for injection moulding. EE165 - 1791 has been developed especially for the automotive interior parts, requiring good impact strength/stiffness, very good scratch resistance and UV resistance. The product is available in natural (EE165) and black (EE165-8229) but other colours can be provided on request. APPLICATIONS Automotive interior parts

EE 265 GRIS 8683/FZH is a 25% mineral filled polypropylene elastomer modified compound intended for injection moulding. EE 265 GRIS 8683/FZH has been developed especially for the automotive interior parts, requiring good impact strength/stiffness, very good scratch resistance and UV resistance. The product is available in natural (EE 265) and black (EE 265-8229) but other colours can be provided on request. APPLICATIONS Automotive interior parts

EEG204-8229 is a 20% chemically coupled glass fibre reinforced polypropylene compound intended for injection moulding. EEG204-8229 has been developed especially for demanding applications in automotive industry and various engineering sectors. EEG204-8229 has high rigidity, good dimensional stability and good creep resistancy also at high temperatures. It has high flow rate and very good process ability. APPLICATIONS Product requiring high service temperature and extremely high mechanical strength such as: - Sockets and junction boxes for electrical industry - Electrical tool and appliance components - Miscellaneous technically items - Air filters - Car grilles - Lamp housing

EEX850 is a 85% mineral filled, polypropylene compound, elastomer modified intended for injection moulding. EEX850 has been developed especially for applications requiring excellent impact strength and high density.

EFR127 is part of a new material family with low halogen no blooming flame retardant, high impact strength, high gloss and antistatic as well as an excellent UV-resistance and very low war page behaviour. Intended for injection moulding. The product is available in natural (EFR127) but other colours can be provided on request. APPLICATIONS EFR127 is recommended for indoor or outdoor electrical and lighting applications like plugs, sockets, connectors, capacitor housings, small junction boxes or lamp covers; where chemical resistance, impact and flammability behaviours are required.

EFR201 is a halogen flame retardant compound with UL 94 V0, intended for injection moulding. The product is high heat stabilised, contains metal deactivator. The product is available in natural (EFR201) but other colours can be supplied on request. APPLICATIONS EFR 201 is intended for the injection moulding of electrical component.