SABIC® PP 510A is a fibre grade with an anti gas fading stabilisation package. SABIC® PP 510A is typically used by our customers for e.g. wipes and industrial carpets but also for geotextiles with a moderate tenacity.Application:SABIC® PP 510A is typically used by our customers for spinning of coarse staple fibres (both short and long spin), carpet fibres and yarns. Health, Safety and Food Contact regulations:Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.comThe product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications.This grade material is UL registered under File E111275 (www.ul.com)IMDS 7172624

SABIC® PP 510P is a fibre grade with an anti gas fading stabilisation package.This grade is suitable for e.g. wipes and industrial carpets.

SABIC® PP 5112A is a polypropylene homopolymer resin is used for extrusion applications like spun bond and continuous filament spinning resulting in excellent non woven tensile properties. . It is formulated with an anti-gas fading stabilization package to minimize discoloration of the fibers. This product can be used for the production of continuous filaments.

SABIC® PP 511A is a polypropylene homopolymer resin specifically designed for extrusion applications like spun bond and continuous filament spinning resulting in excellent non woven tensile properties.The narrow molecular weight distribution of SABIC® PP 511A is obtained by balanced controlled rheology. SABIC® PP 511A is compatible with all existing spun bond/continuous filament machine technologies producing different non woven compositions, produced with narrow distributed molecular weight polypropylene resins. SABIC® PP 511A has a special developed anti gas fading formulation to minimise discolouration of the fibers.

SABIC® PP 511MK40T is a high fluidity polypropylene impact copolymer with high stiffness and medium impact strength. It contains nucleating & antistatic agents.

SABIC® PP 511MK41T is a high fluidity polypropylene impact copolymer with excellent dimensional stability, low warpage, high stiffness and medium impact strength. It contains nucleating & antistatic agents.

SABIC® PP 511MK46 is specially developed for producing injection molded articles. This grade contains nucleating & antistatic agents. It has medium-high flow properties in combination with excellent impact / stiffness balance and excellent organoleptic properties. SABIC® PP 511MK46 encompasses the following features: excellent top load strength & down gauging potential; excellent impact resistance; excellent isotropic shrinkage performance (dimensional stability); high crystallization temperature and excellent flow behavior (lower cycle time); clean product in combination of low / no odor & taste.

SABIC® PP 512A is a controlled rheology grade with narrow molecular weight distribution intended for general purpose applications such as woven sacks lamination and injection molding. SABIC® PP 512A has the following features: Consistent processability; Good thread line stability; Good color consistency; Good gas fading resistance.

SABIC® PP 512MN10 has excellent flow properties and a good combination of high impact strength and stiffness. It is widely used in articles where good processability, high toughness and a low warpage are required, e.g. vacuum-cleaner housings, large size flower pots, foodstuff containers and ice-cream containers. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com) IMDS 80775790

SABIC® PP 513A is a fibre grade with an anti gas fading stabiliser package.Application:SABIC® PP 513A is typically used by our customer for extrusion of staple fibres used in geo-textile applications with an optimum balance of tenacity/elongation. Health, Safety and Food Contact regulations:Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com) IMDS 7172624

SABIC® PP 513MN40 is a controlled rheology PP grade with very high fluidity. It contains an antistatic agent and especially developed for producing injection molded articles. This grade has a good impact resistance even at low temperature.

SABIC® PP 513MNK40T is a very high fluidity polypropylene impact copolymer with high stiffness and medium impact strength. It contains nucleating & antistatic agents.

SABIC® PP 514M12 is a polypropylene homopolymer resin with controllable viscosity typically used by our customers in meltblown nonwoven applications. SABIC® PP 514M12 allows for a melt flow as high as 1200 g/10min with a narrow molecular weight distribution, using typical processing conditions SABIC® PP 514M12 is a meltblown fiber grade that is commonly used for a wide range of potential end-use products, ranging from diapers, sanitary napkins to other hygiene and filtration applications.

SABIC PP 514M14 is a polypropylene homopolymer resin with controllable viscosity typically used by our customers in meltblown nonwoven applications. SABIC PP 514M14 allows for a melt flow as high as 1400 g/10min with a narrow molecular weight distribution, using typical processing conditions.

SABIC® PP 515A is characterized by high flow and broad molecular weight distribution. It contains an anti gas fading stabilisation package.Application: SABIC® PP 515A is typically used by our customers for (bulked) continuous filaments, including mono and tri colour carpet yarns.Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications.This grade material is UL registered under File E111275 (www.ul.com)IMDS 7172624

SABIC® PP5161A is a PP homopolymer grade specially designed for fiber extrusion applications with the following features: Consistent processability; Good thread line stability; Good color consistency; Good gas fading resistance.

SABIC® PP 518A is a PP homopolymer grade with broad molecular weight distribution intended for fiber extrusion applications. SABIC® PP 518A has the following features: Consistent processability; Good thread line stability; Good gas fading resistance.

SABIC® PP 518P is a PP homopolymer grade with broad molecular weight distribution intended for fiber extrusion applications. SABIC® PP 518P has the following features: Consistent processability; Good thread line stability; Good gas fading resistance.

SABIC® PP 5192A is a homopolymer used for extrusion applications. It has very narrow molecular weight distribution and is formulated with an anti-gas fading stabilisation package. This product can be used for the production of continuous filaments. Typical applications are high-tenacity yarns (HTY) and spunbond nonwovens.

SABIC® PP 519A is a polypropylene homopolymer resin specifically designed to enable optimised production speed of very fine filament titre resulting in an excellent balance of mechanical properties and softness. The rheological performance of SABIC® PP519A is providing the potential to optimise production efficiency especially for fibre production characterised by consistent high speed and low non wovens weights at reduced temperatures. SABIC® PP 519A has a very narrow molecular weight distribution. SABIC® PP 519A is compatible with all existing spun bond machine technologies producing different non woven compositions. SABIC® PP 519A has a special developed anti gas fading formulation to minimise discolouration of the fibers.

SABIC® PP 519AF is a high fluidity polypropylene homopolymer with narrow molecular distribution. It is specifically designed to enable optimized production speed of very fine filament resulting in an excellent balance of mechanical properties and softness.

SABIC® PP 5202L is a polypropylene homopolymer with high clarity, high slip and anti-blocking properties, especially suitable for tubular water quenched blown film applications .Films produced using SABIC PP 5202L has the following features: Consistent processability; High melt strength; Good optical properties; Excellent runability on bagging and sealing machines.

SABIC® PP 520L is specially developed for tubular water quenched blown film applications with suitable dosage of slip and antiblock additives. Films produced using SABIC® PP 520L has the following features: Consistent processability; High melt strength; Good optical properties; Excellent runability on bagging and sealing machines.

SABIC® PP 520P is typically used by our customers for extrusion of cast film, both mono layer films and co extruded films. It provides an excellent combination of transparency, stiffness and high heat resistance. Application:SABIC® PP 520P is typically used for food packaging, lamination film, stationary film, textile packaging, flower packaging, and hygiene packaging. It offers excellent properties for twist film application. Health, Safety and Food Contact regulations: SABIC® PP 520P has a Food Contact Declaration. SABIC Material Safety Data Sheets (MSDS) and Product Safety Declarations are available on our Internet site http://www.sabic.com.The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications.This grade material is UL registered under File E111275 (www.ul.com)IMDS 7172624

SABIC® PP 5211P is a non-formulated grade, specially developed for bi-axially oriented PP (BOPP) film extrusion with a very specific molecular structure providing ultimate properties required for the stenter film process. Films produced using PP 5211P will exhibit: -Easy process ability, Good thickness control -Superior optical properties -High tensile properties -Low residual ash -Film produced can be metalized

PP 5212P is high stiffness PP Homopolymer grade, specially developed for bi-axially oriented PP (BOPP) film extrusion with a very specific molecular structure providing ultimate properties required for the stenter film process. Films produced using PP 5212P will exhibit: ? Good process ability, Good thickness control ? Good optical properties ? High tensile properties & High stiffness ? Low residual ash ? Film produced can be metalized

SABIC® PP 521P is particularly designed for (biaxially) oriented PP film extrusion with a very specific molecular structure providing the ultimate properties required for the stretching process.

SABIC® PP 522K is formulated with an advanced nucleating agent and is specially developed for in-line and off-line thermoforming applications. SABIC® PP 522K encompasses the following features: High stiffness; Very good clarity and aesthetics; Very good dimensional stability; Easy processability and faster cycling

SABIC® PP 5231P is a polypropylene homopolymer resin for the extrusion of biaxially oriented film. Films made from this resin exhibit excellent optical, mechanical and moisture barrier properties. This product is suitable for metallization.

SABIC® PP 5232P is a polypropylene homopolymer designed for production of biaxially oriented polypropylene films (BOPP). It offers good optical properties and ease processing, and recommended to be used as mono and co-extruded layer structure for metalizable films.

SABIC® PP 5241P is a polypropylene homopolymer resin for the extrusion of biaxially oriented film. Films made from this resin exhibit excellent optical, mechanical and moisture barrier properties. This product is suitable for metallization.

SABIC® PP 524P is particularly developed for (biaxially) oriented PP film extrusion with a very specific molecular structure providing the ultimate properties required for the stretching process.

SABIC® PP 525P is particularly developed for (biaxially) oriented PP film extrusion with a very specific molecular structure providing the ultimate properties required for the stretching process. Application:SABIC® PP 525P is typically used in mono layer or coextruded (B)OPP film. SABIC® PP 525P is known for its excellent metallisation behaviour. Health, Safety and Food Contact regulations: SABIC® PP 525P has a Food Contact Declaration. Material Safety Data Sheets (MSDS) and Product Safety Declarations are available on our Internet site http://www.sabic.com. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com) IMDS 7172624

SABIC® PP 526P is specially developed for cast film applications for producing clear films and do not contain slip and antiblock additives. Films produced using SABIC® PP 526P will exhibit: Consistent processability; High gloss and clarity; Good melt strength; Good mechanical properties; Film produced can be metalized.

SABIC® PP5271K is a high crystallinity polypropylene homopolymer grade specifically developed for in-line and off-line thermoforming applications. SABIC® PP 5271K encompasses the following features: very high stiffness, very good clarity, very high heat distortion temperature, very good dimensional stability, good processability and fast molding cycle.

SABIC® PP 527K is a leading grade typically used for products in thermoforming. Tailoring of the polymer architecture combined with effective nucleation resulted in a good balance of very high stiffness combined with excellent transparency. Its high crystallisation temperature is ideally suited for further line speed improvements. Moreover it is formulated with a combined processing and antistatic additive package. Application: SABIC® PP 527K is typically used in packaging for Fruit, Vegetables, Meat, Fish, Poultry and Ambient Food packaging. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.sabic.com. This product is not intended for and must not be used in any pharmaceutical/medical applications. IMDS 7172624

SABIC® PP 528K is formulated with an advanced agent and is specially developed for in-line and off-line thermoforming applications. PP 528K encompasses the following features: high stiffness, good clarity, very good dimensional stability, easy process ability and faster cycling.

SABIC® PP 531Ph has a high molecular weight and therefore mainly used for extrusion. It is typically used for non-pressure pipes and sheet applications. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. IMDS 7172624

SABIC® PP 55M10 is a low fluidity polypropylene impact copolymer suitable for injection moulding applications. The product exhibits very high impact strength even at low temperature combined with a good stiffness. .

SABIC® PP 56M10 has high impact resistance, even at low temperatures, and high stiffness. It is typically used in a variety of applications e.g. containers and crates & boxes. It is also used in automotive components, like for example battery cases. Health, Safety and Food Contact regulations:Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com). IMDS 80775790