Beta-PPR™ RA7050 is a PP-RCT(1), a Polypropylene-Random-Copolymer with an enhanced Crystalline structure brought about by a special ß-nucleation and with an improved Temperature resistance. Proof of the excellent performance characteristics of Beta-PPR™ RA7050 is, for example, a categorised required strength (CRS) of 5 MPa at 70°C and 50 years in comparison to a value of 3.21 MPa for standard PP-R. The colour of Beta-PPR™ RA7050 is steel grey similar to RAL 7042. In general Beta-PPR™ RA7050 is intended to be used in applications for plumbing and heating, such as in-house hot and cold water pipes and fitiings, floor and wall heating systems and radiator connections.

BE60-7032 is a high molecular weight, low melt flow rate polypropylene homopolymer with fine grained ß-modification crystalline structure leading to excellent impact strength even at low temperatures, increased hydrostatic strength and improved chemical resistance. The material is coloured grey based on RAL 7032. Applications BE60-7032 is recommended for pressure pipes and fittings, chemical engineering components, extruded and compression moulded sheets, filter plates and solid rods. - Industrial - Non-pressure pipe systems - Pressure pipes - Sheets and profiles

BE60-7032-02 is a high molecular weight, low melt flow rate polypropylene homopolymer with fine grained ß-modification crystalline structure leading to excellent impact strength even at low temperatures, increased hydrostatic strength and improved chemical resistance. The material is coloured grey based on RAL 7032. BE60-7032-02 is recommended for pressure pipes and fittings, chemical engineering components, extruded and compression moulded sheets, filter plates and solid rods. BE60-7032-02 has improved sagging properties compared to Beta (ß)-PP™ BE60-7032.

Borclean HB311BF is a polypropylene homopolymer. Borclean HB311BF is recommended for: - BOPP Dielectrical film for capacitors - Metallisable film Borclean HB311BF contains no slip, antiblock, antistatic additives or nucleating additives. Borclean HB311BF is optimised to deliver: - Super high purity - Improved high thermal stability - Ultra low ash content - Good stiffness - Low dissipation factor - Outstanding processability - Metallisable

Borclean HC300BF is a high cristallinity homopolymer film resin. Borclean HC300BF is recommended for: - BOPP Dielectrical film for capacitors - Metallisable film Borclean HC300BF does not contain slip or antiblock additives. Borclean HC300BF is optimised to deliver: - Super high purity - Improved high thermal stability - Low dissipation factor - Good stiffness - Easy surface roughness control - Outstanding processability - Metallisable - Very low ash content

Borclean HC312BF is a polypropylene homopolymer. Borclean HC312BF is recommended for: - BOPP Dielectrical film for capacitors - Metallisable film - Rough surface impregnation capacitor film Borclean HC312BF contains no slip, antiblock, antistatic additives or nucleating additives. Borclean HC312BF is optimised to deliver: - Super high purity - Ultra low ash content - Produces high consistent rough surface films - Good stiffness - Low dissipation factor - Outstanding processability - Easy surface roughness control - Metallisable

Borclean HC314BF is a polypropylene homopolymer Applications Borclean HC314BF is recommended for: - BOPP Dielectrical film for capacitors - Rough surface impregnation capacitor film - Metallisable film Additives Borclean HC314BF does not contain slip or antiblock additives. Special Features Borclean HC314BF is optimised to deliver: - Outstanding processability - Super high purity - Easy surface roughness control - Low dissipation factor - Good stiffness - Produces high consistent rough surface films - Very low ash content - Metallisable

Borclean HC316BF is a polypropylene homopolymer CAS-No.: 9003-07-0 Applications Borclean HC316BF is recommended for: - BOPP Dielectrical film for capacitors - Metallisable film - Rough surface impregnation capacitor film Additives Borclean HC316BF does not contain slip or antiblock additives. Special Features Borclean HC316BF is optimised to deliver: - Outstanding processability - Good stiffness - Super high purity - Produces high consistent rough surface films - Easy surface roughness control - Very low ash content - Low dissipation factor - Metallisable

Borclean HC318BF is a polypropylene homopolymer. Borclean HC318BF is recommended for: - BOPP Dielectrical film for capacitors - Metallisable film Borclean HC318BF contains no slip, antiblock, antistatic additives or nucleating additives. Borclean HC318BF is optimised to deliver: - Super high purity - Improved high thermal stability - Ultra low ash content - Good stiffness - Low dissipation factor - Outstanding processability - Easy surface roughness control - Metallisable

Borclear RC737MO is a random copolymer . It is designed for blow moulding products with outstanding transparency, clarity and high gloss. This grade also provides high heat distortion temperature, very good impact and good organoleptic properties at improved processability. CAS-No. 9010-79-1 Applications - Cosmetics - Food packaging - Household applications - Containers for fine chemicals Special features - Excellent transparency - Improved gloss - Excellent clarity - Good impact behaviour

Borcoat BB108E-1199 is a polypropylene compound The product is coloured white. It includes a combination of stabilisers to ensure long-term thermal stability. The product is supplied as pellets for melt extrusion and as a powder for application by spray or other special means. Applications Borcoat BB108E-1199 is recommended as a top coat or as an anti-slip "rough coat" for multilayer PP systems used in - Steel Pipe Coating Specifications Borcoat BB108E-1199 is intended to fulfil following National and International standards, when appropriate industrial manufacturing standard procedures are applied and a continuous quality system is implemented and when used in combination with BB127E and a compatible powder epoxy. - DIN 30678 - EN ISO 21809-1 - NF A49-711 Special Features Borcoat BB108E-1199 The maximum design temperature for normal ground installations is 110°C for onshore and can be used in specially designed systems like offshore coatings up to 140°C depending on surrounding conditions. When applied in the correct manner, the powder version provides a rough surface for the purpose of stopping concrete weight coating from slipping during the lay process.

Borcoat BB122E-LT is a maleic anhydride grafted polypropylene adhesive. It has excellent low temperature impact resistance. The product is supplied in pellet form

Borcoat BB122E-LT-P is a maleic anhydride grafted polypropylene adhesive. It has excellent low temperature impact resistance. The product is supplied as a powder for application by spray.

Borcoat BB125E is a chemically modified polypropylene copolymer designed to be used as the tie layer between the epoxy corrosion protection layer and the top-coat polypropylene Borcoat BB108E-1199. The system Borcoat BB125E/Borcoat BB108E-1199 fulfils the requirements of NFA 49-711, DIN 30678, Shell Specification (DEP 31.40.30.31) and prEN 10286 when used in combination with compatible powder epoxy and applied under good manufacturing practice. Borcoat BB125E can be extruded on conventional LDPE extruders with flat die or crosshead. It has excellent adhesion to fusion bonded epoxy and polypropylene. Furthermore, it has superior thermal properties and can be used at operating temperatures within the range of -20°C to 110°C.

Borcoat BB127E is a maleic anhydride grafted polypropylene adhesive. The product is supplied as pellets for melt extrusion and as a powder for application by spray or other special means. Applications Borcoat BB127E is recommended as an adhesive for multi-layer PP systems used in - Steel Pipe Coating Specifications Borcoat BB127E is intended to fulfill following National and International standards, when appropriate industrial manufacturing standard procedures are applied and a continuous quality system is implemented and when used in combination with BB108E-1199 and a compatible Fusion Bonded Epoxy(FBE) powder. - NF A49-711 - DIN 30678 - EN ISO 21809-1 - ABNT NBR 15221-2 Special features Borcoat BB127E The product is intended to be used as an adhesive for PP three layer or multi-layer thermal insulation systems at design temperatures up to 110°C for onshore and 140°C for offshore applications.

Borcoat BB5000FC is a maleic anhydride grafted polypropylene compound. It includes a combination of stabilisers to ensure long-term thermal stability. The product is supplied as pellets for melt extrusion. The product is coloured blue. Applications Borcoat BB5000FC is recommended for melt extrusion of field joint coatings, repair patches and for hot applied tapes/sheets on buried or submerged pipelines. Steel Pipe Coating Specifications Borcoat BB5000FC is intended to fulfil the following international standard: ISO 21809-3, FJC type 5B Special Features Borcoat BB5000FC is a reactive polypropylene compound that can be hot applied directly onto an epoxy pre-coated pipe or as a hot applied tape/sheet together with the powder adhesive Borcoat BB127E or Borcoat BB122E-LT-P .

Borcoat EA165E is an elastomer modified compound, based on a high molecular weight copolymer. The elastomer modification gives excellent low temperature impact resistance. The product can be self coloured. Applications Borcoat EA165E is used for injection moulded field joints, moulded articles and impact resistant external coatings.

Borcoat EB133E-1199-LT is an elastomer modified compound, based on polypropylene copolymer. It has excellent low temperature impact resistance. The product is coloured white. It includes a combination of stabilisers to ensure long-term thermal stability. The product is supplied in pellet form Applications Borcoat EB133E-1199-LT is recommended as a top coat for multilayer PP systems and thermal insulation used in: - Steel Pipe Coating Specifications Borcoat EB133E-1199-LT is intended to fulfil following National and International standards, when appropriate industrial manufacturing standard procedures are applied and a continuous quality system is implemented and when used in combination with Borcoat™ BB122E-LT and a compatible powder epoxy. - ISO 21809-1 - DIN 30678 - NF A49-711 - Gazprom 2-2.2-178-2007 Due to the nature of the modified PP material, indentation resistance of the applied coating could be borderline versus some requirements of common standards and due to known variations in testing, those specified values should be separately agreed upon between the applicator and the client (end user/purchaser). Special Features Borcoat EB133E-1199-LT is intended for design temperatures between -20°C and +110°C and tailored for low temperature handling, transportation and installation.

Borcom BG055AI is a polypropylene microcomposite intended for injection and back injection moulding. This material has an excellent balance between impact strength and stiffness, high melt flow rate and gives a good surface quality. Applications Borcom BG055AI is designed for: - Air ducts - Trunk claddings - Climate control housings Special Features - Long term high heat stabilised - Excellent flowability - UL registered under File E108112

Borcom WE007AE is a polypropylene microcomposite intended for injection moulding. The product is available in natural colour. This material has an excellent balance between impact strength and stiffness and gives a good surface quality.

Borcom WG140AI is a polypropylene microcomposite intended for injection moulding. This material has an excellent balance between impact strength and stiffness, high melt flow rate and gives a good surface quality. Applications Borcom WG140AI has been developed especially for applications like: - Climate control housings - Air ducts Special Features - Long term high heat stabilised - Excellent surface appearance - UL registered under File E108112

Description Borcycle™ EE1300SY is a 15% % mineral filled polypropylene compound containing 30% post-consumer recycled polymer and is intended for injection moulding. This material has an excellent balance between impact strength and stiffness and gives a good surface quality. Applications Borcycle EE1300SY has been developed especially for the car industry to be used in automotive interior parts. - Door panels and pockets - Pillar trims - Tailgate claddings - Interior trims Special Features - High scratch resistance - Good surface aesthetics - Low volatiles - Recycled content

Description Borcycle™ GD3600SY is a 30% chemically coupled glass fibre reinforced polypropylene compound. This material contains 68% post-consumer recycled polymer and is intended for injection moulding. The product is available in standard black 9502. Applications Borcycle GD3600SY has been developed especially for the automotive industry. Special Features - Good flowability - Good impact behaviour - Recycled content

Description Borcycle™ L1300SY is a 15% % mineral filled polypropylene compound containing 30% post-consumer recycled polymer and is intended for injection moulding. This material has an excellent balance between impact strength and stiffness and gives a good surface quality. Applications Borcycle L1300SY has been developed especially for the car industry to be used in automotive interior parts. - Door panels and pockets - Pillar trims - Tailgate claddings - Interior trims Special Features - High scratch resistance - Good surface aesthetics - Low volatiles - Recycled content

Description Borcycle ME1490SYB is a 10% mineral filled polypropylene compound intended for injection moulding. Applications Borcycle ME1490SYB is intended for: Exterior automotive parts Physical Properties Values determined on standard injection moulded specimens conditioned at 23°C and 50% relative humidity after at least 96 hours storage time.

Description Borcycle ME2220SY is a 20% mineral filled polypropylene compound intended for injection moulding. It contains 25% post-consumer recycled polymer. This material has been specifically developed for the automotive industry. Applications Borcycle ME2220SY has been developed especially for the car industry to be used in automotive parts.

Description Borcycle™ MF1981SY-95 is a Post-Consumer Recycled (PCR) compound with around 10% talc, supplied in pellet form for high-end applications mainly in the appliance industry. Borcycle MF1981SY is an ideal PCR solution used where sustainability and circularity matter. It is not intended for use in food contact, potable water contact, pharmaceutical and medical applications. Applications Borcycle MF1981SY-95 offers excellent mechanical performances on top of very good optical properties. It is used in application like - Vacuum cleaners and other small appliances - Visible and non-visible applications in white goods - Structural parts Special Features - Over 80% Post Consumer Recyclate made from used plastic scrap - Good impact performance - Good aesthetical properties - Colour: black - Shape: cylindrical pellets

Description Borcycle™ UF582SA-90 is a high gloss, white compound with 55% advanced Post-Consumer Recycled (PCR) content, supplied in pellet form for high-end applications mainly in the appliance industry. This product is an ideal PCR solution used where sustainability and circularity matter. It is not intended for use in food contact, potable water contact, pharmaceutical and medical applications. Due to the nature of recyclates, some variation in colour can be observed between batches. Applications Borcycle UF582SA-90 offers excellent mechanical performances on top of very good optical properties. It is used in applications like: - Small appliances - White goods - Rigid applications Special Features - 55% Post-Consumer Recyclate made from used plastic scrap - Good stiffness performance - Excellent aesthetical properties - Excellent antistatic performance - High heat resistance - Colour: White

BA110CF is a heterophasic copolymer. This grade is suitable for the manufacturing of unoriented film on blown film lines.

BA160E-8229-01 is an impact polypropylene heterophasic copolymer (block copolymer) with optimised mechanical properties, intended for injection moulding of compression pipe fittings and is coloured black The product features very good processability. It also shows excellent stress crack resistance and a good resistance to chemicals. BA160E-8229-01 is characterised by a combination of high stiffness and high impact strength, also at low temperatures. BA160E-8229-01 has a ß-crystalline molecular PP structure which improves the mechanical properties as well as the crystallisation temperature. This allows for cycle time reduction during injection moulding through higher demoulding temperatures and shorter cooling time. BA160E-8229-01 is classified as an MRS 8.0 material (PE80). The additive formulation is designed for appropriate durability

BA202E is a high molecular weight, low melt flow rate polypropylene block copolymer with very high impact strength. BA202E is recommended for non-pressure pipes & fittings, thin-walled corrugated pipes and profiles.

BA204E is a high molecular weight, low melt flow rate polypropylene block copolymer with very high impact strength. BA204E is recommended for non-pressure pipes & fittings, thin-walled corrugated pipes and profiles.

BB125MO is a heterophasic copolymer. This grade is a low melt flow rate grade intended for blow moulding and sheet extrusion, and features extremely good processability with improved melt strength and melt stability. As all polypropylenes, this grade shows excellent stress-cracking and chemical resistances. This polymer is one of the IMP (improved mechanical stability) grades, and is characterized by very high stiffness without any loss of impact strength even at low temperatures. CAS-No.: 9010-79-1 Applications - Corrugated boards - Industrial chemicals Special features - Good melt strength - Very high stiffness - Good melt stability - High impact strength - Excellent stress crack resistance

BB213CF is a heterophasic copolymer. This grade is suitable for the manufacturing of unoriented films on cast and tubular quench film lines.

BB412E is a natural, medium molecular weight, medium melt flow rate polypropylene block copolymer with an optimal mechanical properties balance resulting in high stiffness and very good impact strength both at room temperature and at low temperatures. Applications BB412E is recommended for pipe extrusion and injection moulding of fittings in the application field of: - Waste water discharge - Corrugated pipes - Cable conduit pipes - Corrugated boards - Sewerage BB412E is also recommended for conduits for electrical installations where conformity to EN 50086 is not mandatory.

BC245MO is a very stiff high impact polypropylene heterophasic copolymer intended for injection moulding. This grade is characterized by combination of good stiffness, good creep resistance and very high impact strength even at low temperatures. This grade features high impact strength, high thermal stability and very good processability. As all polypropylenes, this grade shows excellent stress-cracking and chemical resistances. This grade is mildly nucleated to maximize the mechanical stiffness. The additive formulation provides a smooth demoulding. Nucleation, good flow properties and high stiffness create a high potential for cycle time reduction. Its very good organoleptic properties allows this grade to be used with any masterbatch without discoloring problems.

BC250MO is a very high impact polypropylene heterophasic copolymer intended for injection moulding. This grade is characterized by combination of good stiffness, good creep resistance and very high impact strength even at low temperatures. This grade features high impact strength, high thermal stability and very good processability. As all polypropylenes, this grade shows excellent stress-cracking and chemical resistances. This grade is mildly nucleated to maximize the mechanical stiffness. The additive formulation provides a smooth demoulding. Nucleation, good flow properties and high stiffness create a high potential for cycle time reduction. Its very good organoleptic properties allows this grade to be used with any masterbatch without discoloring problems.

BC545MO is a low-blush polypropylene heterophasic copolymer. This grade features high impact strength, high thermal stability and very good processability. As all polypropylenes, this grade shows excellent stress-cracking and chemical resistances. This grade is characterized by combination of high stiffness, very high impact strength, low stress whitening and good electrical properties. This grade is mildly nucleated to maximize the stiffness-impact balance. The additive formulation provides long-term heat stability. Its very good organoleptic properties allows this grade to be used with any masterbatch without discoloring problems. Applications - Suitcases - Technical parts - Battery cases - Communication cables (UL 444) - Crates and boxes Special Features - Good processability - High stiffness - Good melt stability - High impact strength - Very good stress crack resistance - Good conductor adhesion - Very good chemical resistance - Dielectric properties

BC612WG is a polypropylene copolymer intended for injection moulding. The product is available in natural but other colours can be provided on request. This material has excellent balanced mechanical properties and is easy to process. Applications BC612WG has been developed especially for applications like: - Washing machine parts - Household applications - Dishwashers components Special Features - Long term high heat stabilised - UL registered under File E108112

BD212CF is a heterophasic copolymer. This grade is suitable for the manufacturing of unoriented films on cast and tubular quench film lines.