Extron 3105 HS3 70177 is a 15% glass fibre reinforced coupled polypropylene compound. It is a medium flow injection moulding grade developed for components requiring high rigidity, good creep resistance and impact strength. It has been stabilized for contact with hot water.

Extron 3106 UVH is a 15% glass fibre reinforced coupled polypropylene copolymer compound. It is a high flow injection moulding grade developed for components requiring excellent flexural strength and rigidity combined with high impact strength. It has been stabilized to meet outdoor weathering requirements.

EXTRON 3107 is a 25% glass fibre reinforced coupled polypropylene compound. It is a medium to high flow injection moulding grade developed for components requiring high rigidity and high heat deflection temperatures with excellent creep resistance and good impact strength.

Extron 3108 UV2 is a 30% glass/mineral reinforced coupled polypropylene compound. It is a low flow extrusion grade developed for rigid components requiring good impact strength and is manufactured in accordance with Australian Standard AS 2070, "Plastic Materials for Food Contact Use". The material is UV stabilized for intermittent outdoor exposure.

Extron 3108/1 UV2 is a 50% glass/mineral reinforced coupled polypropylene compound. It is a low flow extrusion grade developed for rigid components requiring good impact strength and is manufactured in accordance with Australian Standard AS 2070, "Plastic Materials for Food Contact Use". The material is UV stabilized for intermittent outdoor exposure.

Extron 3131 GF Natural is a 20% glass fibre reinforced coupled homopolymer polypropylene compound. It is a high flow injection moulding grade developed for high gloss components requiring high rigidity and high heat deflection temperatures.

Extron 3135 HS is a 40% combined talc/glass fibre reinforced coupled polypropylene compound. It is a medium to high flow injection moulding grade developed for components requiring high rigidity, and high heat deflection temperatures with improved creep resistance, good dimensional stability and a better surface than achieved with straight glass filled compounds.

Extron 3143 UVH is a 40% glass fibre reinforced coupled polypropylene compound. It is a low flow injection moulding grade developed for thick walled components requiring excellent creep resistance with high heat deflection temperatures, high flexural modulus, high flexural strength and good impact strength. It has been stabilized to meet long term outdoor weathering requirements.

Extron 7039 GF UV2 30279 is a 7.5% glass fibre reinforced homopolymer polypropylene compound. It is a low flow injection moulding grade developed for components requiring good dimensional stability, improved creep resistance, rigidity and heat deflection temperatures, compared to unmodified polypropylene, whilst maintaining good impact strength. It has been stabilized for improved outdoor weathering performance.

Extron 7075 HS UV2 is a glass fibre and mineral reinforced homopolymer polypropylene compound. It is a high flow injection moulding grade developed for components requiring maximum rigidity, high heat deflection temperatures and low controlled moulding shrinkages. It is stabilized to meet automotive heat aging requirements of 21 days at 150°C and to satisfy interior weathering requirements.

EXTRON PDR 3013 HS3 is a 20% glass fibre reinforced coupled polypropylene compound. It is a medium flow injection moulding grade developed for components requiring high rigidity, good impact strength, high heat deflection temperatures and improved creep resistance. This grade has been heat stabilized for contact with hot water.

Extron PDR 3022 HS is a 25% talc and glass fibre reinforced polypropylene compound. It is a medium flow injection moulding grade developed for components requiring excellent creep resistance with high heat deflection temperatures, high rigidity and good impact strength. It is stabilized to meet automotive heat ageing requirements of 500 hours at 150°C.

Extron PDR 3039 HS UV3 is a 30% combined glass fibre and mineral reinforced coupled polypropylene compound. It is a medium flow injection moulding grade developed for components requiring high rigidity, high heat deflection temperatures, improved creep resistance, good dimensional stability and a better surface than achieved with straight glass filled compounds. It has been stabilized to meet automotive heat aging and exterior weathering requirements.

Extron PDR 3047 HS3 is a 10% glass fibre reinforced coupled homopolymer polypropylene compound. It is a medium to high flow injection moulding grade developed for components requiring good rigidity and creep resistance. It contains a heat stabilizer package that will resist leaching by steam and hot water.

EXTRON PDR 3049 is a 30% glass fibre reinforced coupled polypropylene compound. It is a medium to high flow injection moulding grade developed for components requiring high rigidity and high heat deflection temperatures with excellent creep resistance and good impact strength.

Extron PDR 3076/9 HS is a 30% combined glass fibre and mineral reinforced coupled polypropylene compound. It is a medium flow injection moulding grade developed for components requiring high rigidity, and high heat deflection temperatures with improved creep resistance, good dimensional stability and a better surface than achieved with straight glass filled compounds.

POLYCOMP 6007 is a PTFE filled medium to low flow polypropylene homopolymer compound. It has been developed for applications involving potable water where an extremely low co-efficient of friction is required.

POLYCOMP 6019 is a PTFE filled medium to low flow polypropylene homopolymer compound. It has been developed for applications involving potable water where an extremely low co-efficient of friction is required.

This material has been developed for the striping and jacketing of PE100 pressure pipe. The different colours are based on PE100 resin and are formulated and compounded in accordance with AS/NZS 4130:2009.This requires the inclusion of UV and anti-oxidant stabilizers necessary to protect the stripe or jacket over an extended period. A selection of colours are available as per the Industry Guidelines produced by PIPA Ref POP 004.

Polycomp 6037 HS UV1 is an unfilled, nucleated low to medium flow polypropylene copolymer. It has been developed for the high speed production of Optic Fibre cables required to provide excellent crush resistance, high impact strength, long term oxidative stability and moderate UV protection.

Polycomp 6039 is an unfilled low flow polypropylene copolymer compound. It has been developed for mouldings requiring long term exposure to potable water at varying temperatures and pressures.

Polycomp 6041 is very low flow, unfilled polypropylene compound. It has been developed for mouldings requiring high impact performance combined with good rigidity.

Polycomp 6042 70104 Black is a medium flow, unfilled polypropylene copolymer compound developed for rigid components requiring good impact strength and quick set up. It is formulated with a high loading of a fine particle size carbon black for continuous outdoor exposure.

Polycomp 6050 is an unfilled low flow polypropylene copolymer compound. It has been developed for mouldings requiring long term exposure to potable water at varying temperatures and pressures.

Polycomp 6054 HS 9444 Black is a medium to high flow polypropylene compound with a very good impact/rigidity balance. It is stabilized to resist degradation at elevated temperatures and continuous outdoor weathering. It is suitable for various injection moulding applications.

Polycomp CA 03 UVH is an unfilled low to medium flow copolymer polypropylene compound. It is stabilized with a UV system designed for protection against extended outdoor exposure.

POLYCOMP CA 24 HS UV2 AS is an unfilled high flow polypropylene copolymer compound. It is particularly suited to mouldings with relatively long flow lengths or thin walled sections. It has been heat and light stabilized to meet automotive interior requirements.

POLYCOMP CA 24 UVH AS is an unfilled high flow polypropylene copolymer compound. It is particularly suited to mouldings with relatively long flow lengths or thin walled sections. It is stabilized for continuous outdoor exposure and contains an antistatic agent.

Polycomp CB 01/2 HSE UV2 is an unfilled low flow polypropylene copolymer compound. It has been developed for mouldings requiring good impact resistance and stabilized for long term contact with hot glycol solutions and automotive interior/under bonnet weathering requirements..

POLYCOMP PDR CB 08 70037 is a medium to high flow, high crystaline unfilled polypropylene copolymer. It has been developed for applications requiring increased rigidty and good impact strength while maintaining the good surface appearance and low SG of an unfilled material.

POLYCOMP CB 08 HSE is a medium to high flow, high crystaline, unfilled polypropylene copolymer. It has been developed for applications requiring increased rigidty and HDT combined with good impact strength. It is stabilized for continuous use with hot water.

POLYCOMP CB 30 UVH is a very high flow, high crystaline unfilled polypropylene copolymer. It has been developed for applications requiring increased rigidty and good impact strength while maintaining the good surface appearance and the low SG of an unfilled material. The high MFI of this material will aid in tool filling, particularly of large or intricate parts. It has been stabilised for continuous outdoor weathering.

Polycomp CB01/4 HS 70104 Black is an unfilled low flow polypropylene copolymer compound developed for rigid components requiring good impact strength. It has been stabilized to meet long term heat aging requirements, with a high loading of a fine particle size carbon black providing UV protection for continuous outdoor exposure.

POLYCOMP CD 10 HS UV3 is an unfilled polypropylene copolymer compound. It has been developed for rigid mouldings requiring good impact resistance along with the low SG of an unfilled material. It has been stabilized to meet automotive heat aging requirements and for continual exposure to UV radiation.

Polycomp CE24/2 Natural is an unfilled high flow polypropylene copolymer compound.

Polycomp HA 11 is an unfilled polypropylene compound. It is a medium to high flow injection moulding grade developed for improved rigidity against standard unmodified polypropylene grades.

POLYCOMP PDR CB 08 UV2 is a medium to high flow, high crystaline unfilled polypropylene copolymer. It has been developed for applications requiring increased rigidty and good impact strength while maintaining the good surface appearance and low SG of an unfilled material. It is UV stabilized to meet automotive interior applications.

POLYCOMP PDR CB 08 is a medium to high flow, high crystaline unfilled polypropylene copolymer. It has been developed for applications requiring increased rigidty and good impact strength while maintaining the good surface appearance and low SG of an unfilled material.

Polycomp PDR CE 24 is an unfilled high flow polypropylene copolymer compound. It is a film grade developed for minimal necking during extrusion and lamination.

POLYCOMP PDR HB 05 is a medium flow, unfilled polypropylene compound. It has been developed for electric/electronic appliances and high strength automobile parts which are exposed to elevated temperatures for lengthy periods. It displays a good surface finish and the low SG of an unfilled material.