Biobased elastomers are a range of biodegradable thermoplastic resins partially produced using annually renewable biomass. This range consists of materials like BioTPU and BioTPE. Properties - Up to 80% biobased - Some of them are biodegradables through industrial composting - Highly flexible - Abrasion resistance - Some of them are fit for food contact Applications Process: - Primarly injection moulding Markets: - Sports and leisure - Transports - Regular consumption goods

Biobased elastomers are a range of biodegradable thermoplastic resins partially produced using annually renewable biomass. This range consists of materials like BioTPU and BioTPE. Properties - Up to 80% biobased - Some of them are biodegradables through industrial composting - Highly flexible - Abrasion resistance - Some of them are fit for food contact Applications Process: - Primarly injection moulding Markets: - Sports and leisure - Transports - Regular consumption goods

NEUSoft is a translucent polyether urethane based material with good elasticity, vibration dampening, abrasion and tear resistance. This series of polyurethanes are chemically resistant to hydrolysis and suitable for overmolding on polyolefins, ABS, PC, Pebax and nylon.

NEUSoft is a translucent polyether urethane based material with good elasticity, vibration dampening, abrasion and tear resistance. This series of polyurethanes are chemically resistant to hydrolysis and suitable for overmolding on polyolefins, ABS, PC, Pebax and nylon.

NEUSoft is a translucent polyether urethane based material with good elasticity, vibration dampening, abrasion and tear resistance. This series of polyurethanes are chemically resistant to hydrolysis and suitable for overmolding on polyolefins, ABS, PC, Pebax and nylon.

NEUSoft is a translucent polyether urethane based material with good elasticity, vibration dampening, abrasion and tear resistance. This series of polyurethanes are chemically resistant to hydrolysis and suitable for overmolding on polyolefins, ABS, PC, Pebax and nylon.

Features: - Filament shore hardness of approximately 85A - Consistent diameter and material properties provide reliable, high quality prints - Patent pending technology allows for smooth feeding - Low tack, low CoF exterior allows smooth feed through filament guides - High elasticity and excellent abrasion resistance - Excellent build platform adhesion and bonding between layers - REACH and RoHS 2002/95/EC Directive Compliant

OpteSTAT™ master batches are Ovation Polymers' line of nano-compounds based on carbon nanotubes. Our proprietary dispersion technology debundles and disentangles carbon nanotubes without compromising their integrity. OpteSTATTM compounds exhibit good conductivity at minimal nanotube loadings, achieving exceptional cleanliness and physical property retention. OpteSTAT™ NC TPU 9020 is a Thermoplastic Polyurethane-based carbon nanotube compound. The material resistivity can be tailored to the application, while retaining the physical and thermal properties of the base polymer. Target applications include components of disk drives, business machines or other electronic assemblies where ESD control is required while retaining exceptional cleanliness, dimensional control and physical properties.

Pearlbond™ 106 is a linear, aromatic polyurethane, supplied in form of small white or slightly yellowish granules, which combines a high crystallisation rate with a very high thermoplasticity level. It is used for Hot Melt adhesives. APPLICATIONS Pearlbond™ 106 is mainly used for making heat-sealable fabrics (thermobonding), obtained by coating processes such as scattering or dot-coating (powder or paste). In all cases, the product is previously ground into powder, by cryogenic grinding. The particle size of the powder will depend on the application technique to be used.

Type: Pearlbond™ 1160L is a linear, aromatic polyurethane, supplied in form of white or slightly yellowish pellets, which combines a high crystallization rate and a high thermoplasticity level. Uses: Powder, film APPLICATIONS Pearlbond™ 1160L is used for obtaining PU films by extrusion (blow and cast) for solvent-free adhesion, by heat-seal process. Once activated, the films provide bonds with high initial values, and which have good heat resistance. The adhesion to PVC, rubber and polyurethane materials, as well as to a variety of fabrics, is excellent.

Pearlbond™ ECO 590 is a linear, aromatic bio-polyurethane based on specialty polyol from renewable sources, supplied in form of white spherical granules, with an extremely high crystallization rate and a very high thermoplasticity level. It contains 67% of renewable material as certified according to ASTM-D6866. APPLICATIONS Pearlbond™ ECO 590 can be added to formulations of REACTIVE POLYURETHANE HOT-MELTS (HMPUR), in order to improve the crystallisation speed.

PEARLCOAT® Activa D198K is an aliphatic based thermoplastic polyurethane of low hardness, supplied in the form of natural pellets. This product gives an inherent "low gloss aspect" on the final product surface after extrusion processing. Featuring low gel content as well as low temperature flexibility, it is ideally suited for extrusion or co-extrusion onto polar substrates.

PEARLTHANE® MB-9005 is a TPU-based colour masterbatch, supplied in the form of homogeneously black coloured pellets. It is specially intended for colouring TPUs (either polyester or polyether-based), for extrusion, injection moulding or calendering processes. PEARLTHANE® MB-9005 can be mixed with any items of our PEARLTHANE® or PEARLCOAT® lines (either polyester or polyether-based) intended for applications obtained by extrusion, injection moulding or calendering. A 2 % usage level (on TPU, by weight) is recommended. Higher levels can be considered, depending on the requirements of the end-product.

PEARLTHANE® MB-9010 is a TPU-based colour masterbatch, supplied in the form of homogeneously white-coloured pellets. It is specially intended for colouring TPUs (either polyester or polyether-based), for extrusion, injection moulding or calendering processes. PEARLTHANE® MB-9010 can be mixed with any items of our PEARLTHANE® or PEARLCOAT® lines (either polyester or polyether-based) intended for applications obtained by extrusion, injection moulding or calendering. A 2 % usage level (on TPU, by weight) is recommended. Higher levels can be considered, depending on the requirements of the end-product.