Glasrod HIR is a solid rod and bar fiberglass-reinforced thermoset polyester shape that exhibits properties desirable for a wide range of structural and electrical applications. Highest physical properties. Electrical properties and high temperature capabilities Class H (200°C). Dimensional stability and 100,000 psi flexural strength. Resistant to fluids commonly used around electrical equipment. Greater cost efficiency than epoxy, phenolic, nylon or brass rod. Available in Round Rod.

Glasrod MTS is a solid rod and bar fiberglass-reinforced thermoset polyester shape that exhibits properties desirable for a wide range of structural and electrical applications. Most economical system for electrical use; designed for 155°C service. 50,000 psi tensile and 80,000 psi flexural strength. Available in Rectangular, Square, "A" and Dogbone shapes.

Glasrod SG-200 is a solid rod and bar fiberglass-reinforced thermoset polyester shape that exhibits properties desirable for a wide range of structural and electrical applications. Highest temperature rated for 210°C/210°C service. Excellent thermal endurance. Ideal replacement for silicone rod. Available in Rectangular, Square, "A" and Dogbone shapes.

GlasTherm Grade HT is a high compressive strength, heat-resistant composite material. Finished to a close thickness tolerance, it is ideal for insulation between the fold and the press or within the mold itself. It is completely asbestos-free and rugged to withstand rough handling during installation. It is easily cut and machined with standard metal working equipment. Diamond cutting tools are recommended for long life.

GlasTherm Grade S is a general purpose insulation sheet with an economical combination of thermal and physical properties. Grade S is recommended for processes where the continuous operating temperature does not exceed 425°F. It is completely asbestos-free and rugged to withstand rough handling during installation. It is easily cut and machined with standard metal working equipment. Diamond cutting tools are recommended for long life.

Glastic 1120 is an asbestos-free fiberglass reinforcement thermoset resin sheet. This material has very low water absorption characteristics and also has good splash and spill resistance to acids, weak bases and aliphatic hydrocarbons.

Glastic® 1125 is a Corrosion-Resistant Panel ideal for applications where resistance to both flame, and the splash or spill of laboratory chemicals is important. This asbestos-free, fiberglass-reinforced polyester resin sheet offers a particularly low smoke generation when exposed to flame. This material has very low water absorption characteristics, along with excellent splash and spill resistance to acids, weak bases and aliphatic hydrocarbons.

Glastic 1130 is a fiberglass-reinforcement thermoset polyester composite system which is available as sheet stock or in a variety of pultruded shapes. Glastic 1130 is formulated from a special methyl methacrylate modified neopentyl glycol-isophthalic acid unsaturated polyester resin. This type of resin has long been known for outstanding resistance to color fading caused by sunlight, and for resistance to surface erosion caused by weathering. This resin is also recognized for its performance in corrosive enviornments, including acids, bases and aliphatic hydrocarbons. It also meets the National Electrical manufacturers Association criteria for grade GPO-3. Glastic 1130 was developed to meet the challenging requirements of the NYCTA (New York City Transit Authority). It has been pultruded into channel shaped covers for the electrified third rail; and molded in flat panels for both a sign material and for switchgear components. Approved against NYCTA specifications 62, 64, and 65.

Glastic 1461 is a standoff insulator that is molded of UL recognized flame resistant fiberglass-reinforced thermoset polyester molding compound. Glastic 1461 features shatter resistance and closer height tolerances than commonly available in porcelain insulators. Moisture and heat resistance properties of Glastic 1461 are higher than those of conventional plastic insulators.

Glastic® Grade 1494 is a fiberglass reinforced thermoset polyester material. It is available in sheet form as well as a wide selection of channel, angle, and tube sizes. These materials are the industry standard for flame and arc/track resistant electrical insulation. In addition, the excellent combination of high strength, flame resistance, and low smoke generation has given it application in many other areas such as transit and marine where safe, yet economical materials are required.

Glastic 1580 is an easily fabricated laminate that exhibits excellent flame resistance. This flame-resistant laminate meets the UL94 V0 specification of Underwriters Laboratories. This material was originally designed to meet the television industry's safety assurance requirements. Glastic 1580 has exceptional flame resistance, arc resistance and a high temperature capability for applications such as flyback transformers and arc stack assemblies.

Glastic 1603-2A is a standoff insulator that is molded of UL recognized flame resistant fiberglass-reinforced thermoset polyester molding compound. Glastic 1603-2A features shatter resistance and closer height tolerances than commonly available in porcelain insulators. Moisture and heat resistance properties of Glastic 1603-2A are higher than those of conventional plastic insulators.

Glastic 1603-2D is a standoff insulator that is molded of UL recognized flame resistant fiberglass-reinforced thermoset polyester molding compound. Glastic 1603-2D features shatter resistance and closer height tolerances than commonly available in porcelain insulators. Moisture and heat resistance properties of Glastic 1603-2D are higher than those of conventional plastic insulators.

Glastic 1642-10-E is a standoff insulator that is molded of UL recognized flame resistant fiberglass-reinforced thermoset polyester molding compound. Glastic 1642-10-E features shatter resistance and closer height tolerances than commonly available in porcelain insulators. Moisture and heat resistance properties of Glastic 1642-10-E are higher than those of conventional plastic insulators. Glastic 1642-10-E should not be used upside down if there is a possibility of the center hole being filled with water.

Glastic 1872 is a standoff insulator that is molded of UL recognized flame resistant fiberglass-reinforced thermoset polyester molding compound. Glastic 1872 features shatter resistance and closer height tolerances than commonly available in porcelain insulators. Moisture and heat resistance properties of Glastic 1872 are higher than those of conventional plastic insulators.

Glastic 2015 is a standoff insulator that is molded of UL recognized flame resistant fiberglass-reinforced thermoset polyester molding compound. Glastic 2015 features shatter resistance and closer height tolerances than commonly available in porcelain insulators. Moisture and heat resistance properties of Glastic 2015 are higher than those of conventional plastic insulators.

Glastic 2035-1 is a standoff insulator that is molded of UL recognized flame resistant fiberglass-reinforced thermoset polyester molding compound. Glastic 2035-1 features shatter resistance and closer height tolerances than commonly available in porcelain insulators. Moisture and heat resistance properties of Glastic 2035-1 are higher than those of conventional plastic insulators.

Glastic® 210 is a high temperature resin reinforced with glass fibers. Recommended for stator application.

Glastic 2165 is a standoff insulator that is molded of UL recognized flame resistant fiberglass-reinforced thermoset polyester molding compound. Glastic 2165 features shatter resistance and closer height tolerances than commonly available in porcelain insulators. Moisture and heat resistance properties of Glastic 2165 are higher than those of conventional plastic insulators.

Glastic 2450-15 is a standoff insulator that is molded of UL recognized flame resistant fiberglass-reinforced thermoset polyester molding compound. Glastic 2450-15 features shatter resistance and closer height tolerances than commonly available in porcelain insulators. Moisture and heat resistance properties of Glastic 2450-15 are higher than those of conventional plastic insulators. Glastic 2450-15 should not be used upside down if there is a possibility of the center hole being filled with water.

Glastic® Grade FHT (Flexible High Temperature) Laminate provides numerous high-performance features and benefits, such as high flexibility and excellent dielectric strength at elevated temperatures. It also exhibits the highest UL temperature index in the industry for a flexible glass-reinforced polyester in 1/32 inch and 1/16 inch thicknesses: 190°C and 200°C respectively (for both electrical and mechanical properties). Part Number: 1800

Glastic SG-200 high-strength and high-temperature laminate offers the same high-performance features and benefits as Glastic's FHT Laminate. In addition, SG-200 offers much higher mechanical strengths than FHT with temperature ratings of up to 210°C. Glastic SG-200 is also a superior replacement material for epoxy-bonded mica in layer insulation applications.

Glastic T-160 is a high-strength, heat-resistant laminate. This highly creep-resistant material is excellent for applications where electrically insulating materials are subject to physical loading and moderately high temperature.

Glastic TSF 1312 general-purpose laminate is the most cost-effective fiberglass-reinforced laminate sheet available from Glastic. This resin exhibits outstanding punchability in thin thicknesses. It is widely used in motors and dry-type transformers, as well as a variety of other applications.

Glastic UTR 1494 is a fiberglass reinforced thermoset polyester material. It is available in sheet form as well as a wide selection of channel, angle, and tube sizes. These materials are the industry standard for flame and arc/track resistant electrical insulation. In addition, the excellent combination of high strength, flame resistance, and low smoke generation has given it application in many other areas such as transit and marine where safe, yet economical materials are required.

Glastic UTS 141 is a fiberglass-reinforced laminate. This resin is ideal for applications requiring flame and heat resistance, as well as applications requiring higher retention of properties after heat aging. Glastic UTS 141 is ideal for a wide variety of applications, including intricate punchings for switches, switch plates, controls, control panels, and terminal boards.

Glastic UTS 1478 is a fiberglass-reinforced laminate. This resin is ideal for applications requiring flame and heat resistance, as well as applications requiring higher retention of properties after heat aging. Glastic UTS 1478 is ideal for a wide variety of applications, including intricate punchings for switches, switch plates, controls, control panels, and terminal boards.