Grade 1401 is an electrical grade of encapsulating material. Characterized by a balance of soft flow and cure rate to ensure complete and proper encapsulation without voiding. Generally too soft for compression molding, but excellent in transfer or injection processes. Directly competitive against epoxy encapsulants on cost and cycle times. Very stable shelf life.

Grade 1403 is one of the most useful general purpose electrical grade materials available on the market. Competitive against phenolic, melamine and urea materials for electrical applications. Easy molding in compression, transfer and injection processes. Stable shelf life.

Grade 1410 is a high-strength electrical grade material with excellent flammability resistance. In most applications, this material is competitive with SMC. Equal performance at a lower cost. Normally compression molded, but has been successfully injection molded in a number of applications.

Grade 1412 is one of the most versatile and universal molding materials available anywhere. Flame and track resistant, low shrink for close dimensional control and surface smoothness, high physical properties. Developed for injection molding but also suitable for compression or transfer applications. Glastic's highest temperature material, Grade 1412 is truly a premium material at a reasonable cost. Grade 1412 is approved for Mil specifications MAI-30, MAI-60 and MAT-30.

Grade 1423 is a wear-resistant electrical grade material used in applications where there are moving parts. Best anti-wear properties are exhibited when used in conjunction with mating parts molded from Glastic® Grade 1412 materials. Has moderately high physical strengths combined with excellent electrical properties.

Grade 1603 is a multi-purpose, moderate strength, low-cost material that is suitable for injection, compression and transfer molding.

Grade 1605 is an excellent low-cost HB material with low shrink and medium strength. Has excellent surface finish and gloss. Can be injection, compression or transfer molded.

Grade 1608 is a very high-strength, general purpose, corrosion-resistant material. Recommended for compression molding only. UL® Recognized. Meets FDA requirements for food contact.

Glastic® SLC-1000 is a medium strength, and low-cost glass-reinforced polyester compound with adjustable shrinkage. It is V-O flame arc and track resistant. UL® recognized.

Premi-Glas® 1200H-10 is a fiberglass reinforced thermoset sheet molding compound for general purpose applications requiring thermal stability and stiffness. Key Features and Benefits: - Good dimensional stability, including excellent thermal resistance. - Pigmentable for molded-in color; best appearance with mold texture. - Excellent property retention in cold and hot environments. - Suitable for outdoor use in applications involving UV exposure and water immersion in accordance with UL746C (f1), see File E42524

Premi-Glas® 1200H-15 is a fiberglass reinforced thermoset sheet molding compound for general purpose applications requiring thermal stability and stiffness. Key Features and Benefits: - Good dimensional stability, including excellent thermal resistance. - Pigmentable for molded-in color; best appearance with mold texture. - Excellent property retention in cold and hot environments. - Suitable for outdoor use in applications involving UV exposure and water immersion in accordance with UL746C (f1), see File E42524

Premi-Glas® 1200H-20 is a fiberglass-reinforced thermoset sheet molding compound for general purpose applications requiring thermal stability and stiffness. Key Features and Benefits: - Good dimensional stability, including excellent thermal resistance. - Pigmentable for molded-in color; best appearance with mold texture. - Excellent property retention in cold and hot environments. - Suitable for outdoor use in applications involving UV exposure and water immersion in accordance with UL746C (f1), see File E42524

Premi-Glas® 1200H-22 is a fiberglass reinforced thermoset sheet molding compound for general purpose applications requiring thermal stability and stiffness.

Premi-Glas® 1200H-25 is a fiberglass-reinforced thermoset sheet molding compound for general purpose applications requiring thermal stability and stiffness. Key Features and Benefits: - Good dimensional stability, including excellent thermal resistance. - Pigmentable for molded-in color; best appearance with mold texture. - Excellent property retention in cold and hot environments. - Suitable for outdoor use in applications involving UV exposure and water immersion in accordance with UL746C (f1), see File E42524

Premi-Glas® 1200H-30 is a fiberglass reinforced thermoset sheet molding compound for general purpose applications requiring thermal stability and stiffness. Key Features and Benefits: - Good dimensional stability, including excellent thermal resistance. - Pigmentable for molded-in color; best appearance with mold texture. - Excellent property retention in cold and hot environments. - Suitable for outdoor use in applications involving UV exposure and water immersion in accordance with UL746C (f1), see File E42524

Premi-Glas® 1201-15 is a fiberglass reinforced thermoset sheet molding compound for sanitary ware applications such as shower bases and surrounds, bathtubs, and vanity tops.

Premi-Glas® 1201-20 is a fiberglass reinforced thermoset sheet molding compound for sanitary ware applications such as shower bases and surrounds, bathtubs, and vanity tops.

Premi-Glas® 1203-28 is a versatile fiberglass reinforced thermoset sheet molding compound for automotive body panel, structural and semi-structural applications where excellent surface appearance, high strength, and durability are required. Key Features and Benefits: - Excellent surface profile for highly visible painted surfaces. - Low moisture absorption and long term durability. - Accepts automotive primers and powder in-mold-coatings. - Excellent flexural strength and outstanding toughness. - Standard colors are unpigmented or grey. Limited pigmentability.

Premi-Glas® 1203-30 is a versatile fiberglass reinforced thermoset sheet molding compound for automotive body panel, personal watercraft or structural and semi-structural applications where excellent surface appearance, high strength, and durability are required. Key Features and Benefits: - Excellent surface profile for highly visible painted surfaces. - Low moisture absorption and long term durability. - Accepts automotive primers and powder in-mold-coatings. - Excellent flexural strength and outstanding toughness. - Standard colors are unpigmented or grey. Limited pigmentability.

Premi-Glas® 1205 is a fiberglass reinforced thermoset sheet molding compound for residential entry door skins and other general purpose applications. Key Features and Benefits: - Good warp resistance and dimensional repeatability. - Good flow and fill in thin moldings. - Excellent resistance to sagging and distortion during door assembly. - Outstanding appearance in wood-grain texture or smooth skin applications. - Standard colors are beige and white.

Premi-Glas® 1206 LD is a fiberglass reinforced thermoset sheet molding compound for transportation or structural and semi-structural applications were good surface appearance, high strength, and durability are required in a low density composite.

Premi-Glas® 1266 is a fiberglass reinforced thermoset Thick Molding Compound for composite powertrain applications such as valve covers and timing gear covers. It uses a hybrid vinyl ester/polyester resin system for an excellent combination of cost and performance.

Premi-Glas® 1266 is a fiberglass reinforced thermoset Thick Molding Compound for composite powertrain applications such as valve covers and timing gear covers.

Premi-Glas® 1286 is a fiberglass reinforced thermoset sheet molding compound employing hybrid vinyl ester/polyester resin technology for automotive powertrain and other structural or semi-structural applications. Key Features and Benefits: - Excellent thermal properties and elevated temperature modulus retention. - Replaces cast metals for reduced Noise, Vibration, and Harshness. - Excellent resistance to automotive chemicals and salt spray. - Meets the requirements of GMP.UP.018 and other specs. - Designed for compression molding of large-span valve covers.

Premi-Glas® 2103-10 CR-SX is a fiberglass reinforced thermoset bulk molding compound for electrical and flame retardant applications.

Premi-Glas® 2103-15 CR-SX is a fiberglass reinforced thermoset bulk molding compound for electrical and flame retardant applications.

Premi-Glas® 2103-20 CR-SX is a fiberglass reinforced thermoset bulk molding compound for electrical and flame retardant applications.

Premi-Glas® 2103-22 CR-SX is a fiberglass reinforced thermoset bulk molding compound for electrical and flame retardant applications.

Premi-Glas® 2103-22 CR-SX-HT is a fiberglass reinforced thermoset bulk molding compound for electrical and flame retardant applications.

Premi-Glas® 2103-25 CR-SX is a fiberglass reinforced thermoset bulk molding compound for electrical and flame retardant applications.

Premi-Glas® 2143-24 CR-SX is a fiberglass reinforced thermoset Thick Molding Compound for electrical and flame retardant applications.

Premi-Glas® 2143-24 CR-SX-HT is a fiberglass reinforced thermoset Thick Molding Compound for electrical and flame retardant applications.

Premi-Glas® 2200-15 CR-SX is a fiberglass reinforced thermoset sheet molding compound for electrical, flame retardant, and HVAC applications. Key Features and Benefits: - Pigmentable for molded-in color; best appearance with mold texture. - Good dimensional stability, including excellent thermal resistance. - UL 94-5V flame resistance at 1.5mm minimum thickness. - Subject to UL746C for consideration in exterior applications involving UV exposure and water immersion. File E42524.

Premi-Glas® 2206-15 CR-SX is a fiberglass reinforced thermoset sheet molding compound for electrical, flame retardant, and HVAC applications. Key Features and Benefits: - Non-Halogen FR technology for regulatory compliance. - Pigmentable for molded-in color; best appearance with mold texture. - UL 94-5VA flame resistance at 2.3mm minimum thickness. - Suitable for outdoor use in applications involving UV exposure and water immersion in accordance with UL746C (f1). File E42524. This SMC product is generally intended to be compression molded in matched metal die molds, typically at 300°F (150°C) and 500 to 1000 psi (35-65 BAR) molding pressure. Strength values may be affected by the molding process. Nominal values for polymerization shrinkage (0.0015 to 0.0025 in/in) and specific gravity (1.75 to 1.85) may be customized for individual applications. Contact your A. Schulman sales representative for specific design recommendations.

Premi-Glas® 2206-22 CR-SX is a fiberglass reinforced thermoset sheet molding compound for electrical, flame retardant, and HVAC applications.

Premi-Glas® 2206-25 CR-SX is a fiberglass reinforced thermoset sheet molding compound for electrical, flame retardant, and HVAC applications.

Premi-Glas® 2207-20 CR-SX is a fiberglass reinforced thermoset sheet molding compound for electrical, flame retardant, and HVAC applications. Key Features and Benefits: - Non-Halogen FR technology for regulatory compliance. - Pigmentable for molded-in color; best appearance with mold texture. - UL 94-5VA flame resistance at 1.5mm minimum thickness. - Recognized by Underwriters Laboratories, File # E42524. This SMC product is generally intended to be compression molded in matched metal die molds, typically at 300°F (150°C) and 500 to 1000 psi (35-65 BAR) molding pressure. Strength values may be affected by the molding process. Nominal values for polymerization shrinkage (0.001 to 0.0025 in/in) and specific gravity (1.85 to 1.90) may be customized for individual applications. Contact your A. Schulman sales representative for specific design recommendations.

Premi-Glas® 2207-22 CR-SX is a fiberglass reinforced thermoset sheet molding compound for electrical, flame retardant, and HVAC applications. Key Features and Benefits: - Non-Halogen FR technology for regulatory compliance. - Pigmentable for molded-in color; best appearance with mold texture. - UL 94-5VA flame resistance at 1.5mm minimum thickness. - Recognized by Underwriters Laboratories, File # E42524. This SMC product is generally intended to be compression molded in matched metal die molds, typically at 300°F (150°C) and 500 to 1000 psi (35-65 BAR) molding pressure. Strength values may be affected by the molding process. Nominal values for polymerization shrinkage (0.001 to 0.0025 in/in) and specific gravity (1.85 to 1.90) may be customized for individual applications. Contact your A. Schulman sales representative for specific design recommendations.