DERAKANE 510 B-400 Epoxy Vinyl Ester Resin is a low viscosity, unpromoted, flame retardant") epoxy vinyl ester. This resin offers offers exceptional processing characteristics including little to no foaming, excellent exotherm control, and industry-leading storage stability. Laminates made with DERAKANE 510 B-400 resin have achieved a flame spread of 25 (ASTM E-84). DERAKANE 510 B-400 resin gives final products with: - Excellent flame retardancy - High strength characteristics - Excellent impact strength and toughness - Fast wet-out and low drainage - Excellent corrosion resistance to acidic and alkaline environments APPLICATIONS AND USE DERAKANE 510 B-400 resin can be used for corrosion resistant, reinforced thermosetting plastic equipment including filament wound, hand lay-up and spray-up tanks, pipes, ducts, stacks, scrubbers, linings or other equipment handling corrosive gases, vapors or liquids where a high degree of flame retardancy is required.

DERAKANE 510C-350 resin is a brominated vinyl ester resin that offers a high degree of fire retardance while providing the excellent chemical resistance and toughness typical of DERAKANE resins. Optimum fire retardance is achieved when antimony compounds are added to the resin. DERAKANE 510 C-350 resin provides resistance to a wide range of acids, alkalis, bleaches and organic compounds for use in many chemical processing industry applications. APPLICATIONS AND USE Equipment fabricated with DERAKANE 510C-350 resin resists mechanical and chemical damage which enables it to be used in various caustic environments such as sodium hypochlorite, chlorine dioxide and alkaline hydrogen peroxide. It is also suitable for equipment specified to handle mixtures of air and hot gases, building panels, and flooring compounds where a degree of fire retardance is required. It is also recommended for use in FRP ductwork, stacks and stack-liner applications. DERAKANE 510C-350 resin is designed for ease of fabrication using hand lay-up, spray-up, filament winding, compression molding, resin transfer molding techniques and pultrusion.

DERAKANE 510N resin is a brominated novolac epoxy vinyl ester resin that offers a moderate degree of fire retardance. It is the preferred resin the DERAKANE resin portfolio for strong oxidizers, such as chlorine and chlorine dioxide. It is also useful in hot, Wet fluegas environments vvhere thermal upsets can occur and vvhere fire retardance is desired. It exhibits a corrosion resistance similarto DERAKANE 470 resins in most environments. APPLICATIONS AND USE DERAKANE 51ON resin is used extensively in FRP ductvvork, stacks, and stack liner applications, equipment specified to handle mixtures ofair and hot gases or potentially flammable and corrosive liquids, and flooring compounds where heat and/or fire retardance is required. DERAKANE 51ON resin is recommended for most FRP fabrication processes including filament winding, hand lay—up, spray—up, pultrusion and resin transfer molding.

DERAKANE 8084 epoxy vinyl ester resin is an elastomer modified resin designed to offer increased adhesive strength, superior resistance to abrasion and severe mechanical stress, while giving greater toughness and elongation. DERAKANE 8084 resin is the resin of choice as a primer to prepare a substrate surface (steel or concrete) for application of a corrosion resistant lining. It exhibits outstanding adhesive strength on different types of steel, aluminium and concrete. APPLICATIONS AND USE DERAKANE 8084 resin has exhibited chemical resistance across a broad range of acids, bases and organic chemicals. DERAKANE 8084 resin can be used for RTM, hand-lay up, spray-up, filament winding and other industrial FRP applications.

DERAKANE MOMENTUM 411-350 epoxy vinyl ester resin is based on bisphenol-A epoxy resin and provides resistance to a wide range of acids, alkalis, bleaches, and organic compounds for use in many chemical processing industry applications. DERAKANE MOMENTUM resins are a new generation of resins that can be used to improve fabrication efficiency and product quality. Their lighter color makes defects easier to see and correct while the resin is still workable. The resin's improved reactivity properties often permit an increase in the lay-up thickness per session. The longer stability provides additional flexibility to fabricators in storage and handling. APPLICATIONS AND USE This resin is suitable for fabricating FRP storage tanks, vessels, ducts, and on-site maintenance projects, particularly in chemical processing and pulp and paper operations. DERAKANE MOMENTUM 411-350 resin is designed for ease of fabrication using hand lay-up, spray-up, filament winding, compression molding and resin transfer molding techniques, pultrusion and molded grating applications. An alternate viscosity, optimized for some vacuum infusion processes, is available as DERAKANE MOMENTUM 411-200 resin.

DERAKANE MOMENTUM 470-300 resin is a novolac-based vinyl ester designed to provide exceptional mechanical properties at higher temperatures. This resin offers a high resistance to solvents and chemicals, good retention of strength and toughness at elevated temperatures, and excellent resistance to acidic oxidizing environments. DERAKANE MOMENTUM resins are a new generation of resins that can be used to improve fabrication efficiency and product quality. Their lighter color makes defects easier to see and correct while the resin is still workable. The longer stability provies additional flexibility to fabricators in storage and handling. APPLICATIONS AND USE DERAKANE MOMENTUM 470-300 resin is suitable for applications involving high temperature chlorination or caustic scrubbing and storage, industrial waste treatment facilities and solvent extraction processes used in mining. It is also used for hydrochloric acid transport, tank, truck and railcar linings, and gasohol storage. DERAKANE MOMENTUM 470-300 is recommended for most commercial FRP fabrication processes including hand lay-up, spray-up, pultrusion and resin transfer molding. The higher viscosity of MOMENTUM DERAKANE 470-300 resin facilitates filament winding and contact molding applications.

DERAKANE MOMENTUM® 510 C-350 is a brominated epoxy vinyl ester resin that offers a high degree of fire retardance while providing excellent chemical resistance and toughness. Optimum fire retardance is achieved when antimony compounds are added to the resin. Laminates made with DERAKANE MOMENTUM 510 C-350 resin have met ASTM E-84 Flame Spread "Class 2" rating (less than 75). With the use of antimony synergists, "Class 1" ratings can be achieved. APPLICATIONS AND USE DERAKANE MOMENTUM 510 C-350 resin is designed for ease of fabrication using hand lay-up, spray-up, filament winding, compression molding, resin transfer molding and pultrusion techniques. This resin is used extensively in FRP duct work, stacks and stack-liner applications. It is also suitable for equipment handling mixtures of air and hot gases, building panels and flooring compounds where a degree of ignition inhibiting properties are needed. DERAKANE MOMENTUM 510 C-350 resin resists mechanical and chemical damage enabling use in various caustic environments such as sodium hypochlorite, chlorine dioxide and alkaline hydrogen peroxide.

This data represents typical values that have been calculated from all products classified as: Generic Vinyl Ester This information is provided for comparative purposes only.

HCR-125 is a corrosion resistant vinyl ester sheet created by impregnating fiber glass mat, synthetic surface veil, and inert additives with Derkane 470 resin and catalyst. A compression molded product is produced by controlling a chemical reaction under heat and extreme pressure. Haysite HCR-125 offers excellent strength to weight ratios in addition to their corrosion resistance. Application: HCR-125 material can be sawed, sheared, machined, and punched to any size and shape. Successful applications include: tanks, tank covers, ductwork, exhaust and fume hoods, separators, bins, fan housings, trays, hoppers, sinks, lab table tops, fume scrubbers, heat exchanger plates, filter press plates, and other applications requiring a material with excellent resistance to corrosive elements. Standard color - Beige.

HETRON 922 resin is a low viscosity, unpromoted patented epoxy vinyl ester resin with F-Cat technology. This patented technology results in a resin that exhibits no foaming, excellent exotherm control, and industry-leading storage stability. The raw materials used in the manufacture of this resin are listed as acceptable in FDA regulation Title 21 CFR 177.2420 for repeated use in contact with food, subject to user's compliance with the prescribed limitations of that regulation. HETRON 922 epoxy vinyl ester resin gives final products with: - Excellent corrosion resistance - Excellent impact strength - High tensile elongation APPLICATIONS AND USE HETRON 922 resin is designed for use in hand lay-up, spray-up, and filament winding. It can also be used for flake glass and filled lining and coating compounds.

Ashland Resins for the Pultrusion Market Chemistry High reactivity epoxy vinyl ester Performance Attributes Good toughness. Formulated per CFR 177.2420. Typical Applications Thin parts requiring corrosion resistance. Parts requiring NSF registration.

Ashland Resins for the Pultrusion Market Chemistry Medium reactivity epoxy vinyl ester Performance Attributes Processing of thicker parts. Formulated per CFR 177.2420. Typical Applications Thicker parts requiring corrosion resistance.

Ashland Resins for the Pultrusion Market Chemistry Fire retardant resin Performance Attributes Excellent UV resistance. Good color and chemistry. Typical Applications Architectural panels.

HETRON FR992 resin is a low viscosity, unpromoted, flame retardant") patented epoxy vinyl ester with F-Cat technology. This patented technology results in a resin that exhibits no foaming, excellent exotherm control, and industry-leading storage stability. Laminates made with HETRON FR992 resin have achieved a flame spread of <25 (ASTM E-84) when 3% antimony trioxide is added and a flame spread of <75 without antimony trioxide. HETRON FR992 resin gives final products with: - Excellent flame retardancy - High strength characteristics - Excellent impact strength and toughness - Fast wet-out and low drainage - Excellent corrosion resistance to acidic and alkaline environments APPLICATIONS AND USE HETRON FR992 resin can be used for corrosion resistant, reinforced thermosetting plastic equipment including filament wound, hand lay-up and spray-up tanks, pipes, ducts, stacks, scrubbers, linings or other equipment handling corrosive gases, vapors or liquids where a high degree of flame retardancy is required.

HETRON FR998/35 resin is a low viscosity, unpromoted, flame retardant") patented epoxy vinyl ester with F-Cat technology. This patented technology results in a resin that exhibits no foaming, excellent exotherm control, and industry leading storage stability. Laminates made with HETRON FR998/35 resin have achieved a flame spread of <25 (ASTM E-84) without antimony trioxide. HETRON FR998/35 resin also contains <35% styrene. Equipment fabricated with HETRON FR998/35 resin exhibit: - Excellent flame retardancy - Excellent thermal shock resistance - Excellent corrosion resistance to acids and oxidizers - Excellent thermal properties - Fast wet-out, low drainage APPLICATIONS AND USE HETRON FR998/35 resin can be used for corrosion resistant, reinforced thermosetting plastic equipment including filament wound, hand lay-up and spray-up tanks, pipes, ducts, stacks, scrubbers, linings or other equipment handling corrosive gases, vapors or liquids where a high degree of flame retardancy is required. The product is well suited for the caustic/chlorine and power industry applciations.

PRODUCT SERIES: ST 1000 SERIES BMC PRODUCT DESCRIPTION: POLYESTER, VINYLESTER AND HYBRID COMPOSITES

PRODUCT SERIES: STC 2100 SERIES SMC PRODUCT DESCRIPTION: HIGH STRENGTH EPOXY VINYLESTER COMPOSITES

PRODUCT SERIES: STC 2100 SERIES SMC PRODUCT DESCRIPTION: HIGH STRENGTH EPOXY VINYLESTER COMPOSITES

PRODUCT SERIES: STC 2100 SERIES SMC PRODUCT DESCRIPTION: HIGH STRENGTH EPOXY VINYLESTER COMPOSITES

PRODUCT SERIES: STC 3100 SERIES BMC PRODUCT DESCRIPTION: HIGH STRENGTH CARBON FIBER REINFORCED EPOXY VINYLESTER COMPOSITES

PRODUCT SERIES: STC 3100 SERIES BMC PRODUCT DESCRIPTION: HIGH STRENGTH CARBON FIBER REINFORCED EPOXY VINYLESTER COMPOSITES

PRODUCT SERIES: STC 3100 SERIES BMC PRODUCT DESCRIPTION: HIGH STRENGTH CARBON FIBER REINFORCED EPOXY VINYLESTER COMPOSITES

Vinyl Ester Resin for Electrowinning Cell MERICAN-11C is a corrosion resistant epoxy vinyl ester resin with high molecular weight. It is suitable for making monolithic polymer concrete electrowinning cells. PROPERTY - Good wet-out with fillers and glass fiber - Air drying; Smooth and dense surface, good impermeability - Excellent mechanical properties and heat resistance - Low peak exothermic; Thick parts do not crack - Low profile, good flexibility and strong adhesion APPLICATION - Suitable for making polymer concrete, especially for monolithic electrowinning cells in copper, zinc, nickel, cobalt and other non-ferrous hydrometallurgy industry. - Suitable for vacuum infusion process.

EPOXY VINYL ESTER RESIN (VARIM) MERICAN® 30-200P is a low-viscosity, prepromoted, high performance epoxy vinyl ester resin. It owns excellent properties both in mechanical and processing, fatigue resistance. MERICAN 30-200P is suitable for Vacuum Infusion Process. PROPERTY - Low-viscosity - Shorter geltime drift, good storage stability - Low peak exotherm, thick pieces can be formed at one time - Good curing properties, thoroughly curing for thin pieces - Excellent mechanical properties, good adhesion between laminates - Resistant to fatigue, aging and corrosion APPLICATION - Suitable for the fabricatiion of composites products with high performance and complex structure, especially large windmill blades and yachts, etc. - Suitable for vacuum infusion process

MFE-10 is a bisphenol-A epoxy vinyl ester resin with low styrene emission Property - Suitable viscosity, excellent infiltration with glass fiber. - Low styrene content - Excellent chemical resistance. - Heat distortion temperature of casting is 130°C Application - Special for the molding processes of thermal curing FRP such as pultrusion, filament winding, etc - Used to cementation or repairing material for concrete structure.

MFE-11 is a bisphenol-A epoxy vinyl ester resin with high performance and excellent corrosion resistance. PROPERTIES - Moderate viscosity, effectively wet out with glass fiber - Good air drying, surface drying in 45 min - Excellent corrosion resistance, especially to alkali. - Low peak exotherm, low shrinkage, superior toughness. Do not crack when making thick parts. - Lloyd's Registered. - Complies with FDA regulation 21 CFR 177.2420, when properly formulated and cured, for repeated use in food contact materials. APPLICATION - Chemical storage tank, pipeline, cabin and the jointing material of integral anti-corrosive resin-mortar flooring, granite and anti-proof brick, etc. - Liner and flake of FRP protective surface of metal or concrete structure. - Can be used in hand lay-up, pultrusion, spray up and filament winding process.

MFE-2 is a bisphenol-A epoxy vinyl ester resin, offering excellent general properties, mechanical properties and corrosion resistance. PROPERTY - Reliable process performance. - Better resistance against acid and alkali. - Lloyd's Registered. - Complies with FDA regulation 21 CFR 177.2420, when properly formulated and cured, for repeated use in food contact materials. APPLICATION - Various types of anti-corrosive FRP products, chemical tank, pipe, marine/yachts, etc. - Used in FRP protective surface of metallic or concrete structure - Used as the jointing material of integral anti-corrosive resin-mortar flooring, granite and anti-proof brick, etc - Can be used in filament winding, pultrusion, hand lay-up and spray-up process.

MFE-22 Bisphenol-A Epoxy vinyl ester resin has superior thermal resistance. PROPERTY - Heat Deflection Temperature 20°C higher than MFE-2 - Corrosion resistance similar to MFE-2 - Exceptional wettability APPLICATION - FRP tank, vessel, duct, molded grating, pultruded products and pipeline, etc.

MFE-30 is a high performance bisphenol-A epoxy vinyl ester resin and has excellent corrosion resistant property. PROPERTY - Excellent process performance and wet-out with fiber. - Excellent corrosion resistant especially to inorganic acid, alkali and salt. - Excellent mechanical properties, especially resistance to dynamic load. - Low peak exotherm, low shrinkage. APPLICATION - Various FRP products, especially thick parts. - Can be used in various processes, such as filament winding, pultrusion, spray up, hand lay-up, etc - Applied in engineering projects, such as integral resin mortar flooring, sewing materials, protection layer of metal and concrete structures, etc.

MFE-36 is based on bisphenol-A epoxy vinyl ester resin, modified by methacrylic acid. It has excellent flexibility. PROPERTY - Excellent process performance and wet-out with fibers. - Excellent corrosion-resistance, especially to inorganic acid, alkali, salt, etc. - Excellent mechanical properties. - High tensile elongation. - Low peak exotherm, low shrinkage. APPLICATION - Can be used in various processes, such as hand lay-up, pultrusion, spray-up, filament winding, etc - Various FRP products. - Corrosion resistant flooring, sealing material, FRP layer on the surface of metal and concrete structure.

MFE-4 which modified by HET acid (1'4'5'6'7'7-hexachlorobicyclo(2'2'1)-5-heptene-2'3-dicarboxylic acid), is a special chlorine resistant vinyl ester resin. PROPERTY HET acid in molecular structure protects the ester group, which largely increases the resin's corrosion resistance, especially to Cl 2 and various acids. Besides, the HET acid structure contains two five-membered rings, which makes MFE-4 has good thermal stability, fire-retardancy and chemical resistance. APPLICATION - Various integral anti-corrosion FRP products, such as pipes, tank truck, scrubber, etc. - Special for FRP equipment of ClO 2 bleaching system in paper and pulp industry, lining of bricks. Can be used as daub resin. - Special for covers of electrolytic cells in chlorine-alkali industry.

MFE-5 is acrylic acid type vinyl ester resin modified with isocyanate. Compared with 3201 and 3202, MFE-5 has better corrosion resistance and mechanical properties. PROPERTY - Good water-proof and acid-, alkali-resistance - High tenacity and low shrinkage, good mechanical function - Good air drying. Can be used as surface coating - Long-term service temperature is 90? APPLICATION - Various anti-corrosion FRP products - Used in FRP protective linings or surface coating - Can be used in hand lay-up, pultrusion and filament winding process

MFE-7 is a bromated bisphenol-A epoxy vinyl ester with excellent fire retardancy. Both filled and non-filled fire-retardant epoxy vinyl ester resins are available based on MFE-7 resin. PROPERTY - Excellent anticorrosion performance and mechanical function - The oxygen index of FRP mixed with 3-5% Sb2O3 up to 40 - Both casting and laminate meet ASTM E-84 Flame Spread "Class 1" rating. - Good air drying APPLICATION - Used in manufacturing fire-retardant and anti-corrosive FRP products and linings, also in surface coatings

MFE-9 Vinyl Ester Resin is a rubber modified resin with high toughness, and based on Bisphenol-A epoxy vinyl ester resin. PROPERTY - Low solid contractibility, high toughness, high ductility - Excellent fatigue resistance, impact resistance and cleavage resistance - Excellent adhesion and abrasion resistance, excellent impact strength. - Excellent penetration-proof and hermetically seal. APPLICATION - Used in making flooring, daubing material, sealing material and interface layer of FRP lining - Used in manufacturing helmet for aviation, automobile race and military use, short sled, sailing boat and high performance racing boat - Excellent adhesion, can be used for special tackiness agent - Used with fiber and other reinforced materials, give excellent strength and fatigue resistance property to lamination

MFE-W3 is a novolac-based epoxy vinyl ester resin. It offers corrosion resistance at higher temperatures. PROPERTY - High heat-resistance, heat distortion temperature of casting is 150°C and for FRP is 210°C. - Excellent anti-corrosion and superior stability to some solvents and oxidizing media. - Complies with FDA regulation 21 CFR 177.2420, when properly formulated and cured, for repeated use in food contact materials. APPLICATION - Various corrosion resistant FRP products, such as chemical tank, pipe, served at elevated temperatures. - Used as the jointing material, resin mortar and special adhesive with chemical resistance. - Used as anti-corrosion FRP lining for the surface of metal or concrete. - Can be used in pultrusion, filament winding, spray up and hand lay- up process.

Premi-Glas® 1261-28 is a fiberglass reinforced thermoset Thick Molding Compound with proven effectiveness in a wide variety of applications. It uses a vinyl ester resin technology for optimal strength, and corrosion and heat resistance. Key Features and Benefits - Suitable for injection molding, injection-compression, or compression molding. - Excellent resistance to automotive chemicals, salt spray, and acids. - Replaces cast metals for reduced Noise, Vibration and Harshness. - TMC compounding process preserves glass integrity for strength vs BMC. - Excellent thermal properties and elevated temperature modulus retention.

AMC® 85590 is a chopped carbon fiber reinforced molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant and a low density. The carbon fiber is standard modulus PAN based 12K tow. Features: - Excellent Mechanical Properties - Very good surface profile