Fluoropolymer: PTFE
製品 | 可用性 | 製品の説明 |
---|---|---|
Fluorosint® 207 PTFE | アジア太平洋地域 |
Fluorosint® 207 Polytetrafluoroethylene PTFE is a Food Contact Compliant (FDA) grade of Fluorosint® with a unique combination of dimensional stability and creep resistance, exceptional sliding and wear properties, and outstanding chemical and hydrolysis resistance. Possessing the lowest coefficient of friction of all Fluorosint® materials, Fluorosint® 207 PTFE shapes excel in food, pharmaceutical, and chemical processing industries, especially for aggressive service bearing and bushing applications. It is also a preferred material for lower pressure seats and seals, where virgin PTFE fails and Food Contact Compliance may be required.
|
Fluorosint® 500 PTFE | アジア太平洋地域 |
Fluorosint® 500 Polytetrafluoroethylene PTFE shapes possess a unique combination of stability and wear resistance, for sealing applications where tight dimensional control is required. With nine times greater resistance to deformation under load than unfilled PTFE, Fluorosint® 500 PTFE exhibits outstanding chemical and hydrolysis resistance, and excellent mechanical and tribological properties. Additionally, Fluorosint® 500 PTFE's coefficient of linear thermal expansion approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, which often eliminates fit and clearance problems for designers.
|
Fluorosint® HPV PTFE | アジア太平洋地域 |
Fluorosint® HPV Polytetrafluoroethylene PTFE is an FDA Compliant, high performance, bearing grade of Fluorosint®. Optimized for high PV, and low "k" or wear factor, Fluorosint® HPV PTFE was developed specifically for bearing applications, where other PTFE formulations typically exhibit premature wear and cannot perform adequately. Ideal for food processing and pharmaceutical applications, Fluorosint® HPV PTFE's FDA Compliance gives equipment manufacturers new design options, due to this grade's superior load bearing and wear characteristics.
|
Fluorosint® MT-01 PTFE | アジア太平洋地域 |
Fluorosint® MT-01 Polytetrafluoroethylene PTFE, is an extreme grade that was developed specifically for applications where the benefits of PTFE-based materials also require outstanding strength, stiffness, and stability. Often specified in seat, seal, and wear applications where extreme conditions are present, Fluorosint® MT-01 PTFE delivers superior mechanical performance at elevated temperatures.
|
Fluorosite 300 - GML | ラテンアメリカ | |
Fluorosite 600 - GML | ラテンアメリカ | |
Fluorosite 600 - GMP | ラテンアメリカ | |
Generic PTFE - Bronze | アジア太平洋地域 |
This data represents typical values that have been calculated from all products classified as: Generic PTFE - Bronze
This information is provided for comparative purposes only.
|
Generic PTFE - Carbon Fiber | アジア太平洋地域 |
This data represents typical values that have been calculated from all products classified as: Generic PTFE - Carbon Fiber
This information is provided for comparative purposes only.
|
Generic PTFE - Glass Fiber | アジア太平洋地域 |
This data represents typical values that have been calculated from all products classified as: Generic PTFE - Glass Fiber
This information is provided for comparative purposes only.
|
Generic PTFE - Graphite Fiber | アジア太平洋地域 |
This data represents typical values that have been calculated from all products classified as: Generic PTFE - Graphite Fiber
This information is provided for comparative purposes only.
|
Generic PTFE | アジア太平洋地域 |
This data represents typical values that have been calculated from all products classified as: Generic PTFE
This information is provided for comparative purposes only.
|
Miflon® 2111B | アジア太平洋地域 |
Dispersion PTFE Resin (PTFE)
Quality Standard: Q/321200GDH009-2011
Reference Standard: HG/T3028-1999
|
Miflon® 2122B | アジア太平洋地域 |
Dispersion PTFE Resin (PTFE)
Quality Standard: Q/321200GDH009-2011
Reference Standard: HG/T3028-1999
|
Miflon® 2223B | アジア太平洋地域 |
Dispersion PTFE Resin (PTFE)
Quality Standard: Q/321200GDH009-2011
Reference Standard: HG/T3028-1999
|
Miflon® 2333B | アジア太平洋地域 |
Dispersion PTFE Resin (PTFE)
Quality Standard: Q/321200GDH009-2011
Reference Standard: HG/T3028-1999
|
Miflon® 2444B | アジア太平洋地域 |
Dispersion PTFE Resin (PTFE)
Quality Standard: Q/321200GDH009-2011
Reference Standard: HG/T3028-1999
|
Miflon® 3021 | アジア太平洋地域 |
Suspension PTFE Resin (Fine Particle Size) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard:HG/T2903-1997
Cleanness
- white surface, well-distribution, no impurity
|
Miflon® 3031 | アジア太平洋地域 |
Suspension PTFE Resin (Fine Particle Size) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard:HG/T2903-1997
Cleanness
- white surface, well-distribution, no impurity
|
Miflon® 3112 | アジア太平洋地域 |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Clean and white surface, well-distribution, no impurity
- D=57mm, no color difference for rod cross section
|
Miflon® 3113 | アジア太平洋地域 |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Clean and white surface, well-distribution, no impurity
- D=57mm, no color difference for rod cross section
|
Miflon® 3114 | アジア太平洋地域 |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Clean and white surface, well-distribution, no impurity
- D=57mm, no color difference for rod cross section
|
Miflon® 3121 | アジア太平洋地域 |
Suspension PTFE Resin (Fine Particle Size) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard:HG/T2903-1997
Cleanness
- well-distribution, not more than 6 impurities and spots, among of it not more than 2 impurities of D=0.5mm-2mm, not more than 1 impurity of D=2mm-3mm
|
Miflon® 3122 | アジア太平洋地域 |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Clean and white surface, well-distribution, no impurity
- D=57mm, no color difference for rod cross section
|
Miflon® 3123 | アジア太平洋地域 |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Clean and white surface, well-distribution, no impurity
- D=57mm, no color difference for rod cross section
|
Miflon® 3124 | アジア太平洋地域 |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Clean and white surface, well-distribution, no impurity
- D=57mm, no color difference for rod cross section
|
Miflon® 3131 | アジア太平洋地域 |
Suspension PTFE Resin (Fine Particle Size) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard:HG/T2903-1997
Cleanness
- well-distribution, not more than 6 impurities and spots, among of it not more than 2 impurities of D=0.5mm-2mm, not more than 1 impurity of D=2mm-3mm
|
Miflon® 3212 | アジア太平洋地域 |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Clean surface, well-distribution, no metal impurity, not more than 2 impurities (=1mm)
|
Miflon® 3213 | アジア太平洋地域 |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Clean surface, well-distribution, no metal impurity, not more than 2 impurities (=1mm)
|
Miflon® 3214 | アジア太平洋地域 |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Clean surface, well-distribution, no metal impurity, not more than 2 impurities (=1mm)
|
Miflon® 3221 | アジア太平洋地域 |
Suspension PTFE Resin (Fine Particle Size) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard:HG/T2903-1997
Cleanness
- well-distribution, not more than 6 impurities and spots, among of it not more than 2 impurities of D=0.5mm-2mm, not more than 1 impurity of D=2mm-3mm
|
Miflon® 3222 | アジア太平洋地域 |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Clean surface, well-distribution, no metal impurity, not more than 2 impurities (=1mm)
|
Miflon® 3223 | アジア太平洋地域 |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Clean surface, well-distribution, no metal impurity, not more than 2 impurities (=1mm)
|
Miflon® 3224 | アジア太平洋地域 |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Clean surface, well-distribution, no metal impurity, not more than 2 impurities (=1mm)
|
Miflon® 3231 | アジア太平洋地域 |
Suspension PTFE Resin (Fine Particle Size) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard:HG/T2903-1997
Cleanness
- well-distribution, not more than 6 impurities and spots, among of it not more than 2 impurities of D=0.5mm-2mm, not more than 1 impurity of D=2mm-3mm
|
Miflon® 3313 | アジア太平洋地域 |
Suspension PTFE Resin (Virgin Granular) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard: HG/T2902-1997
Cleanness
- Not clean and well-distribution, or have small metal impurities, more than 2 impurities (=1mm)
|
Miflon® 3321 | アジア太平洋地域 |
Suspension PTFE Resin (Fine Particle Size) (PTFE)
Quality Standard: Q/321200GDH014-2012
Reference Standard:HG/T2903-1997
Cleanness
- Not well-distribution, more than 6 impurities and spots
|
Miflon® 5111 | アジア太平洋地域 |
PTFE Dispersion Concentrated Emulsion (PTFE)
Quality Standard:Q/321200GDH016-2012
|
Miflon® 5222 | アジア太平洋地域 |
PTFE Dispersion Concentrated Emulsion (PTFE)
Quality Standard:Q/321200GDH016-2012
|
POLYFLON™ PTFE D-110 | アジア太平洋地域 |
POLYFLON PTFE D-110 is an opalescent liquid in which fine particles of PTFE are dispersed. It is suitable for gland packing applications.
Introduction
- POLYFLON PTFE D-110 is a milky white aqueous dispersion of polytetrafluoroethylene polymer particles stabilized with nonionic surfactant without PFOA.
- It is suitable for gland packing applications.
- It adopts more environmentally friendly surfactant than conventional ones.
|