Fluoropolymer: ソレフ®
製品 | 可用性 | 製品の説明 |
---|---|---|
ソレフ® 1008/0HP1 | アジア太平洋地域 |
Solef® 1008 PVDF is a low viscosity homopolymer resin mainly used in injection molding.
|
ソレフ® 1008 | アジア太平洋地域 |
Solef® 1008 PVDF is a low viscosity homopolymer resin mainly used in injection molding.
|
ソレフ® 1010/0HP1 | アジア太平洋地域 |
Solef® 1010/0HP1 PVDF is a medium viscosity homopolymer resin typically processed by extrusion.
|
ソレフ® 1015 | アジア太平洋地域 |
ソレフ® 1015 PVDF ホモポリマーは、メンブレンの製造に適した非常に高い粘度を有します。パウダー形式だけで提供されます。
|
ソレフ® 11008/0003 | アジア太平洋地域 |
Solef® 11008/0003 PVDF is a low viscosity flexible PVDF copolymer resin and is typically processed by extrusion or injection molding.
|
ソレフ® 11010 | アジア太平洋地域 |
ソレフ® 11010 PVDF は中程度の粘度を持つ柔軟性の高い PVDF コポリマー樹脂で、一般に押出成形により加工されます。
|
ソレフ® 2042 Latex | アジア太平洋地域 |
Solef® 2042 Latex is an aqueous stabilized dispersion that contains approximately 25% by weight of a high molecular weight chemically modified PVDF copolymer (polyvinylidene fluoride) of medium crystallinity, that gives high adhesion to ceramics and separators in combination with low swelling, ideal for its usage in lithium batteries.
Solef® 2042 Latex is useful for applications such as water-based impregnation of separators in Li-Ion batteries and energy storage devices.
The main properties of Solef® 2042 Latex are:
- Good adhesion to separator and to ceramics
- Low swelling in electrolyte
- Good wettability by electrolyte
- Good flexibility
- Good lamination to electrodes
|
ソレフ® 21510 | アジア太平洋地域 |
ソレフ® 21510 PVDF コポリマーは中程度の粘度を持ち、押出成形やリチウム電池用途の溶液状態での加工に適しています。
|
ソレフ® 3108/0903 | 欧州 |
Solef® 3108/0903 is a low viscosity PVDF resin, it is anti-static and typically processed by extrusion.
|
ソレフ® 31508/0003 | アジア太平洋地域 |
Solef® 31508/0003 PVDF copolymer is a low viscosity and very flexible grade for Wire&Cable applications.
|
ソレフ® 31508/0009 | アジア太平洋地域 |
Solef® 31508/0009 PVDF copolymer is a low viscosity and very flexible grade for Wire&Cable applications.
|
ソレフ® 31508 | アジア太平洋地域 |
ソレフ® 31508 PVDF コポリマーは、ワイヤ・ケーブル用途向けの低粘度で非常に柔軟性の高いグレードです。
|
ソレフ® 41308/0001 | アジア太平洋地域 |
Solef® 41308/0001 PVDF is specifically developed for coextrusion.
|
ソレフ® 41308/1001 | アジア太平洋地域 |
Solef® 41308/1001 PVDF is specifically developed for powder coating applications.
|
ソレフ® 42308/0001 | アジア太平洋地域 |
Solef® 42308/0001 PVDF is specifically developed for coextrusion.
|
ソレフ® 460S/461S | アジア太平洋地域 |
Solef® 460S/461S PVDF homopolymer has high melt viscosity and is typically processed by extrusion.
|
ソレフ® 5000S | 欧州 |
Solef® 5000S is a crystalline high molecular weight powder form of polyvinylidene fluoride (PVDF) specifically designed for solvent-based non-architectural coatings. It forms mechanically strong and tough films that have a broad useful temperature range. These films are highly resistant to most environmental conditions including gamma radiation and are essentially transparent to ultraviolet radiation. The weathering characteristics of Solef® 5000S coatings lead to excellent performance for the long term.
SAFETY
Solef® 5000S is stable at temperatures up to 600°F (316°C). When it is subjected to temperatures above 600°F (316°C) for extended periods of time, hydrogen fluoride (HF) begins to evolve, and at temperatures above 700°F (371°C) HF evolution becomes rapid. Solef® 5000S exhibits excellent flame resistance; however, in case of fire, HF and traces of potentially toxic fluorocarbons can be formed. HF is corrosive, causes burns on contact, and has an American Conference Governmental Industrial Hygienists (ACGIH) Threshold Limit Value (TLV-TWA) of 3 ppm (2.5 mg/m³) (1984).
Thermal decomposition of Solef® 5000S to HF can also occur in a bake oven in the event that temperatures are not controlled properly. In the event of fire, use NIOSH approved self-contained breathing apparatus and skin protection to protect against volatile decomposition products. Solef® 5000S can be disposed of in an approved landfill, but should not be incinerated unless permitted by applicable law and provision is made for absorption of HF.
|
ソレフ® 5120 | アジア太平洋地域 |
ソレフ® 5120 PVDF は中粘度グレードで、リチウム電池での使用に最適な高い密着性を提供します。
|
ソレフ® 5130 | アジア太平洋地域 |
ソレフ® 5130 PVDF は超高粘度グレードで、リチウム電池に最適な最高の密着性を提供します。
|
ソレフ® 5140 | アジア太平洋地域 |
Solef® 5140 PVDF is an ultra high viscosity grade that gives superior adhesion and ultra high viscosity at reduced binder content, ideal for its use as binder in Lithium Ion Batteries.
|
ソレフ® 6008 | アジア太平洋地域 |
ソレフ® 6008 PVDF ホモポリマーは低粘度の PVDF 樹脂で、一般に射出成形により加工されます。
|
ソレフ® 6010 | アジア太平洋地域 |
ソレフ® 6010 PVDF ホモポリマーは中程度の粘度を有し、一般に押出成形により加工されます。
|
ソレフ® 6012 | アジア太平洋地域 |
ソレフ® 6012 PVDF ホモポリマーは高粘度の PVDF 樹脂で、一般に押出成形または圧縮成形により加工されます。
|
ソレフ® 6020 | アジア太平洋地域 |
ソレフ® 6020 PVDF ホモポリマーは、メンブレンおよびリチウム電池向けの非常に高い粘度を有します。パウダー形式だけで提供されます。
|
ソレフ® 60512/0550 and 60512/0150 | アジア太平洋地域 |
ソレフ® 60512/0550 およびソレフ® 60512/0150 は、耐摩耗性テープの押出成形用に PTFE とコンパウンディングされた PVDF グレードです。
|
ソレフ® 60512 | アジア太平洋地域 |
ソレフ® 60512 PVDF コポリマーは、高い溶融粘度を持つ沖合配管用のグレードです。
|
ソレフ® 75040 | アジア太平洋地域 |
Solef® 75040 PVDF copolymer is a ultra high molecular weight, chemically modified grade that combines excellent adhesion, good flexibility and easy solution process, which makes it ideal for usage in lithium batteries.
Main features of Solef® 75040 PVDF are:
- Good adhesion
- Ultra high molecular weight
- Good flexibility
|
ソレフ® 75130 | アジア太平洋地域 |
Solef® 75130 PVDF copolymer is a ultra high molecular weight, chemically modified grade that combines excellent adhesion, good flexibility and easy solution process, which makes it ideal for usage in lithium batteries.
Main features of Solef® 75130 PVDF are:
- Good adhesion
- Ultra high molecular weight
- Soluble in acetone and ketones
- Good flexibility
|
ソレフ® 8808/0902 | 欧州 |
Carbon fibers reinforced - Injection
|
ソレフ® 9007 | アジア太平洋地域 |
ソレフ® 9007 PVDF ホモポリマーは、粘度が低く、フィルムの押出成形や射出成形で使用されます。
|
ソレフ® 90615/2002 | アジア太平洋地域 |
Solef® 90615 PVDF copolymer has high viscosity of the melt and it is a grade for offshore piping.
|
ソレフ® FPCH08/0001 | アジア太平洋地域 |
Solef FPCH08/0001 is a low-viscosity PVDF resin typically processed by injection molding.
|
ソレフ® FPCH09/0001 | アジア太平洋地域 |
Solef FPCH09/0001 is a medium-low viscosity PVDF resin typically processed by injection molding.
|
ソレフ® FPCH10/0001 | アジア太平洋地域 |
Solef FPCH10/0001 is a medium-viscosity PVDF resin typically processed by extrusion.
|
ソレフ® Latex 2060 | アジア太平洋地域 |
Solef® Latex 2060 is an aqueous dispersion that contains approximately 21% by weight of a high molecular weight PVDF polymer (polyvinylidene fluoride) of high crystallinity. The dispersion is stable against coagulation by conventional means.
Solef® Latex 2060 is useful for applications such as water-based impregnation of separators in Li-Ion batteries and energy storage devices.
The main properties of Solef® Latex 2060 are:
- Good adhesion to separator and to ceramics
- Low swelling in hot electrolyte
- Good wettability by electrolyte
- Good flexibility
- Good lamination to electrodes
|