40% Mineral filled Laser Direct Structuring grade. 40% Mineral filled Laser Direct Structuring grade. Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant UL-Listing V-0 in black at 1.5mm thickness per UL 94 flame testing. UL = Underwriters Laboratories (USA)

LDS capable LCP with higher DTUL and impact LDS capable LCP with higher DTUL and impact Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant UL-Listing V-0 in black a 0.25mm thickness per UL 94 flame testing. UL = Underwriters Laboratories (USA)

Glass and mineral filled grade, high flow and low warpage 43% glass and mineral reinforced grade. Glass and mineral filled grade, high flow and low warpage. Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant

Vectra®Â FIT 50 is a 30% mineral reinforced liquid crystal polymer for injection molding. It has excellent filling capability and extremely low warpage performance in long and thin wall complicated applications.

40% Mineral filled; high heat resistance. 40% Mineral filled, high heat resistance. Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant

40% Mineral filled, high heat resistance. Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant

15% Glass fiber reinforced Vectra® MT1305 VF3001 (natural) is a 15% glass reinforced, easy flow LCP grade for injection molding. Vectra® MT1305 VF3001 (natural) is a special grade developed for medical industry applications and complies with: Food Contact Substance Notification (FCN) No. 742 of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 8464) and the Device Master File (MAF 315) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP 23 Class VI/ISO 10993 low residual monomers no animal products Provides easier flow than MT1310 VF3001 (natural) Slightly tougher, but may warp slightly more than MT1310 in some parts Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant UL-Listing V-0 in natural and black at 0.44mm thickness per UL 94 flame testing. Relative-Temperature-Index (RTI) according to UL 746B: electricals 240°C, mechanicals 220°C at 0.85mm. UL = Underwriters Laboratories (USA)

30% glass fiber, exc. bal. of properties Vectra® MT1310 VF3001 (natural) is a 30% glass reinforced, easy flow LCP grade for injection molding. Vectra® MT1310 VF3001 (natural) is a special grade developed for medical industry applications and complies with: Food Contact Substance Notification (FCN) No. 742 of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 8464) and the Device Master File (MAF 315) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP 23 Class VI/ISO 10993 low residual monomers no animal products The Standard for the Industry. Excellent balance of properties, including easy flow, easy processing, thermal stability, chemical resistance, mechanical and electrical properties. Suitable for vapor phase surface mount electrical and electronic devices. Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant

Glass/PTFE, best High Arc Ignition performance Vectra® MT1335 VF3001 (natural) is a glass/PTFE filled, tribologically-modified, easy flow LCP grade for injection molding. Vectra® MT1335 VF3001 (natural) is a special grade developed for medical industry applications and complies with: Food Contact Substance Notification (FCN) No. 742 of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 8464) and the Device Master File (MAF 315) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP 23 Class VI/ISO 10993 low residual monomers no animal products Best High Current Arc Ignition (HAI) performance Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant

30% mineral , hydrolytically stable Vectra® MT1345 VF3001 (natural) is a 30% mineral filled, easy flow LCP grade for injection molding. Vectra® MT1345 VF3001 (natural) is a special grade developed for medical industry applications and complies with: Food Contact Substance Notification (FCN) No. 742 of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 8464) and the Device Master File (MAF 315) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP 23 Class VI/ISO 10993 low residual monomers no animal products Best overall surface appearance with properties similar to MT1310. Less abrasive than glass fiber reinforced grades. Improved toughness over MT1310. Outstanding hydrolytic stability. Recommended where aesthetics are key. Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant.

30% glass fiber, excellent flow, high temperature capability Vectra® MT4310 VF3001 (natural)Â is a 30% glass reinforced high flow, LCP grade for injection molding. Vectra® MT4310 VF3001 (natural) is a special grade developed for medical industry applications and complies with: Food Contact Substance Notification (FCN) No. 742 of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 8464) and the Device Master File (MAF 315) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP 23 Class VI/ISO 10993 low residual monomers no animal products Highest temperature capability Easiest flow Suitable where very thin walls are required Used for broad range of SMT applications, with minimal dimensional change Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant

40% mineral, low warp & easy flow with smooth surface appearance Vectra® MT4350 VF3001 (natural) is a mineral filled high flow LCP grade for injection molding Vectra® MT4350 VF3001 (natural) is a special grade developed for medical industry applications and complies with: Food Contact Substance Notification (FCN) No. 742 of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 8464) and the Device Master File (MAF 315) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP 23 Class VI and/or ISO 10993 low residual monomers no animal products Mineral filled grade with low warp, easy flow and smooth surface appearance. Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant

Ultra High Heat Resistance, 35% Glass Fiber 35% glass reinforced Vectra grade with very low outgassing, very high heat deflection temperature (335°C) and stiffness. Typical applications are lamp sockets, lens holders for beamers, electrical and electronic parts like connectors, relays, switches, coil bobbins and also under the hood applications. Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant UL-Listing V-0 in natural at 0.28mm thickness per UL 94 flame testing. Relative-Temperature-Index (RTI) according to UL 746B: electrical 130°C, mechanical 130°C. UL = Underwriters Laboratories (USA)

High temperature glass-fiber/mineral grade for fine pitch applications. High flow, High Heat resistance, Low Warpage, for Thick Walled (>0.2mm) or thin (< 0.2mm)& Thick Walled combination parts. Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant UL-Listing V-0 in natural and black at 0.4mm thickness per UL 94 flame testing. Relative-Temperature-Index (RTI) according to UL 746B: electricals 130°C, mechanicals 130°C. UL = Underwriters Laboratories (USA)

Super High Flow, High heat Resistance and Low Wrap for Thin Parts Super High Flow, High heat Resistance and Low Warp for Thin Parts. Vectra S475 is a 32% glass fiber and mineral reinforced grade. Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant UL-Listing V-0 in natural and black at 0.1mm thickness per UL 94 flame testing. Relative-Temperature-Index (RTI) according to UL 746B: electricals 130°C, mechanicals 130°C. UL = Underwriters Laboratories (USA)

Low friction and wear resistance. Low friction and wear resistance. Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant.

LCP/PPS Blend, 40% glass reinforced LCP/PPS blend. Maintains most of the characteristics of E130i with improved weldline strength and flatness in certain geometries. 40% glass reinforced. Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant.

Co-extrudable LCP for Barrier Applcations Co-extrudable LCP for Barrier Applications. Vectra V400P Liquid Crystal Polymer is characterized by its excellent barrier properties independent of relative humidity, chemical resistance and contact clarity in thin film applications. This material is not suitable for medical or dental implants. Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant

ZENITE 15115 is a high flow 15% glass filled LCP resin with high temperature capability, excellent balance of properties and processability.

High Flow LCP Zenite 16236 is a high flow, low warpage grade for thin wall connector applications

This grade offers excellent flowability, low warpage, excellent surface appearance, and excellent dimensional stability. ZENITE® 17311 EFT is a 35% glass and mineral reinforced grade. This grade offers excellent flowability, low warpage, excellent surface appearance, and excellent dimensional stability. Application for this grade is fine pitch connector with thin wall.

This LCP is designed for low dielectric constant (Dk), excellent flow characteristics & mechanical strength and high temperature resistance. For use in injection molded electronics applications for thin walls.

This LCP is designed for Laser Direct Structuring, low dielectric constant, and low dissipation factor

Zenite® 451P is a 30% mineral filled grade. It offers thermal conductivity, excellent mechanical strength, surface appearance, low warpage, and excellent dimensional stability. Application for this grade is for a part with thin wall design in automotive and electronics.

15% glass-reinforced, lubricated Zenite® 5115L is a 15% glass fiber reinforced liquid crystal polymer for injection molding with improved toughness.

30% glass-reinforced, lubricated Zenite 51301L is a 30% glass-filled LCPÂ resin with improved toughnessÂ

30% glass-reinforced, lubricated Zenite 5130L is a 30% glass-reinforced LCP resin with improved toughness

45% glass reinforced, lubricated Zenite® 5145L is a 45% glass fiber reinforced and toughened liquid crystal polymer for injection molding. It has improved toughness.

40% glass/mineral reinforced Zenite 5244L is a 40% glass/mineral reinforced LCP resin with improved toughness.

50% glass/mineral reinforced, lubricated Zenite® ZE55201 is a 50% mineral/glass fiber reinforced liquid crystal polymer for injection molding. and It is specifically suitable for applications requiring ultra flatness.

High dielectric constant Zenite® ZE55205 is a black reinforced LCP resin with a high dielectric constant.

30% glass reinforced Zenite® 6130 is a 30% glass fiber reinforced liquid crystal polymer for injection molding. It has excellent impact resistance and excellent heat deflection temperature.

Zenite 6130L is a lubricated 30% glass reinforced LCP resin. It is well suited for use in the automotive, electrical/electronic, telecommunications, and aerospace industries. Zenite® 6130L is a lubricated 30% glass reinforced LCP resin. It is well suited for use in automotive, electrical/electronic, telecommunications, and aerospace industries.

30% glass reinforced, lubricated, improved weldline strength Zenite® 6130LX is a 30% glass fiber reinforced liquid crystal polymer for injection molding. and It is well suited for all kinds of demanding applications.

40% glass reinforced, lubricated Zenite® 6140L is a 40% glass fiber reinforced and lubricated liquid crystal polymer for injection molding. It has excellent impact resistance and excellent heat deflection temperature.

40% glass fiber and mineral reinforced, lubricated Zenite 6244L is a lubricated, 40% glass fiber and mineral reinforced liquid crystal polymer resin. It is well suited for use in the automotive, electrical/electronic, telecommunications, and aerospace industries.

30% mineral reinforced Zenite® 6330 is a 30% mineral reinforced liquid crystal polymer for injection molding. It has excellent impact resistance, excellent heat deflection temperature and is well suited for all kinds of demanding applications.