Acetal (Acetal): TEREZ POM
| 製品 | 可用性 | 製品の説明 |
|---|---|---|
| TEREZ POM 8001 | 欧州 |
High viscosity standard grade for injection moulding and extrusion, parts of thick walls.
Gear wheels, clips, fasteners, rollers applications, transporting chains, skibinding parts.
|
| TEREZ POM 8005 ER | 欧州 |
Medium viscosity standard grade for moulding parts of all kind. Reduced Plate out and reduced emission
Wheels, clips, fasteners, nuts and screws, bearings and clutch parts.
|
| TEREZ POM 8005 GF 10 | 欧州 |
Injection molding grade with 10% glass fibre reinforced.
For molding parts with high stiffness and strength.
|
| TEREZ POM 8005 GF 20 | 欧州 |
Standard grade 20% glass fibre reinforced.
For moulding parts with higher stiffness and better mechanical strength.
|
| TEREZ POM 8005 GF25 | 欧州 |
25 % reinforced glass fibre standard grade.
Housing, functional and supporting elements at elevated temperature.
|
| TEREZ POM 8005 GK 30 | 欧州 |
Injection moulding grade, 30% glass beads reinforced.
Suitable for injection moulding.
|
| TEREZ POM 8005 I | 欧州 |
Standard Type with medium viscosity with enhanced impact resistance.
For all kind of injection moulding parts with raised impact stress.
|
| TEREZ POM 8005 M | 欧州 |
Tribological modified grade with molybdenum disulphide.
For injection moulded parts with enhanced anti-friction properties.
|
| TEREZ POM 8005 TF 5 | 欧州 |
Medium viscosity standard quality, with 5 % PTFE.
For all kind of applications with increased demand of tribological characteristics.
|
| TEREZ POM 8005 UV | 欧州 |
Medium viscosity standard grade, UV stabilized, for moulding parts of all kind. (reduced Plate out).
Wheels, rollers applications, clips, fasteners, nuts and screws, bearings and clutch parts.
|
| TEREZ POM 8005 | 欧州 |
Medium viscosity standard grade for moulding parts of all kind. (reduced Plate out)
Wheels, rollers applications, clips, fasteners, nuts and screws, bearings and clutch parts.
|
| TEREZ POM 8007 | 欧州 |
Standard grade, good flowability. (reduced Plate out)
Moulding parts of all kind, nuts and screws, bearing and clutch-parts, pump elements.
|
| TEREZ POM 8014 | 欧州 |
Standard grade with very good flowability. (reduced Plate out)
Long moulding parts, accurate reproduction of detail.
|
| TEREZ POM 8705 | 欧州 |
Standard type with medium viscosity, high impact strength and high damping capacity.
For injection moulding grades.
|
| TEREZ POM 8710 | 欧州 |
Standard quality with good flowability, medium impact resistance and high vibration damping properties.
For injection moulding applications.
|
1
1
