Rilsan® BMVO TLD resin is a polyamide 11 produced from a renewable source. This natural grade is designed for injection molding. The percentage of renewable carbon according to ASTM D 6866 (calculated) is >99%.

Rilsan® BSR 30 resin is a polyamide 11 produced from a renewable source. Light and rigid, this grade is carbon fiber reinforced and designed for injection molding. The percentage of renewable carbon is 60% (calculated value, based on ASTM D6866).

Rilsan® BUM 30 BLACK resin is a glass bead reinforced polyamide 11 produced from a renewable source. The incorporation of glass beads yields a virtually isotropic reinforced product. This black grade is dedicated to injection molding. The percentage of renewable carbon according to ASTM D 6866 (calculated) is >95%.

Rilsan® BUM 30 O resin is a glass bead reinforced polyamide 11 produced from a renewable source. The incorporation of glass beads yields a virtually isotropic reinforced product. This natural grade dedicated to injection is specially designed for drinking water application: WRAS (UK). The percentage of renewable carbon according to ASTM D 6866 (calculated) is >97%.

Rilsan® BZM 23 G9 is a fiberglass reinforced polyamide 11 produced from a renewable source. This black grade with improved friction properties is designed for injection molding. The percentage of renewable carbon according to ASTM D 6866 (calculated) is >86%.

Rilsan® BZM 30 BLACK TL is a fiberglass reinforced polyamide 11 produced from a renewable source. This black grade is designed for injection molding. The percentage of renewable carbon according to ASTM D 6866 (calculated) is >95%.

Rilsan® BZM 30 O TL is a fiberglass reinforced polyamide 11 produced from a renewable source. This natural grade is designed for injection molding. The percentage of renewable carbon is 98% (calculated value, based on ASTM D6866).

Rilsan® BZM 7 O TL is a fiberglass reinforced polyamide 11 produced from a renewable source. This natural grade is designed for injection. The percentage of renewable carbon is 89% (calculated value, based on ASTM D6866).

Rilsan® BZM 8 O T3L is a fiberglass reinforced polyamide 11 produced from a renewable source. This natural grade is designed for injection. This grade has been engineered and stabilized to improve color stability. The percentage of renewable carbon is 97% (calculated value, based on ASTM D6866). Note that this document is a temporary technical data sheet.

Rilsan® BZM 8 O TL is a fiberglass reinforced polyamide 11 produced from a renewable source. This natural grade is designed for injection. The percentage of renewable carbon according to ASTM D 6866 (calculated) is >97%.

Rilsan® Clear G 850 Rnew® MED is a high performance transparent copolyamide having outstanding purity level, partially based on renewable resources. This grade offers highest quality and is specifically designed to meet the stringent requirements of the medical applications. The percentage of renewable carbon measured according to ASTM D6866 is 45%.

Rilsan® Clear G170 MED is a high performance transparent polyamide resin with outstanding thermal resistance. This grade offers the highest quality and is specifically designed to meet the stringent requirements of the medical applications. Upon request letters regarding USP class VI compliance can be provided.

Rilsan® Clear G170 is a high performance transparent polyamide resin with outstanding thermal resistance. This grade has been designed for injection molding applications.

Rilsan® Clear G820 Rnew® is a high performance transparent polyamide with outstanding chemical resistance and stress cracking resistance.This grade has been designed for injection molding applications. The percentage of renewable carbon is 60% (calculated value, based on ASTM D6866).

Rilsan® Clear G850 Rnew® is a high performance transparent copolyamide, partially based on renewable resources. This grade has been specially designed for injection molding applications, ideally suited for optic as high end eyewear frames. The percentage of renewable carbon measured according to ASTM D6866 is 45%.

RILSAN® D30 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 21 - 27 µm. RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in coatings and varnishes. The introduction of RILSAN® polyamide powders in formulations is easy thanks to their good dispersion capacity, their reduced Impact on rheology and their low density. RILSAN® polyamide powders are surface modifiers, specifically designed for texture creation. Abrasion, scratch, impact resistances and flexibility of coatings, inks and varnishes can be significantly improved using RILSAN® polyamide powders.

RILSAN® D40 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 27 - 31 µm. RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in coatings and varnishes. The introduction of RILSAN® polyamide powders in formulations is easy thanks to their good dispersion capacity, their reduced Impact on rheology and their low density. RILSAN® polyamide powders are surface modifiers, specifically designed for texture creation. Abrasion, scratch, impact resistances and flexibility of coatings, inks and varnishes can be significantly improved using RILSAN® polyamide powders.

RILSAN® D50 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 40 - 46 µm. RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in coatings and varnishes. The introduction of RILSAN® polyamide powders in formulations is easy thanks to their good dispersion capacity, their reduced Impact on rheology and their low density. RILSAN® polyamide powders are surface modifiers, specifically designed for texture creation. Abrasion, scratch, impact resistances and flexibility of coatings, inks and varnishes can be significantly improved using RILSAN® polyamide powders.

RILSAN® D60 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 43 - 55µm. RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in coatings and varnishes. The introduction of RILSAN® polyamide powders in formulations is easy thanks to their good dispersion capacity, their reduced Impact on rheology and their low density. RILSAN® polyamide powders are surface modifiers, specifically designed for texture creation. Abrasion, scratch, impact resistances and flexibility of coatings, inks and varnishes can be significantly improved using RILSAN® polyamide powders.

RILSAN® D80 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 95 - 105µm. RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in coatings and varnishes. The introduction of RILSAN® polyamide powders in formulations is easy thanks to their good dispersion capacity, their reduced Impact on rheology and their low density. RILSAN® polyamide powders are surface modifiers, specifically designed for texture creation. Abrasion, scratch, impact resistances and flexibility of coatings, inks and varnishes can be significantly improved using RILSAN® polyamide powders.

Rilsan® EVOLUTION ENO P210 TL resin is a flexible polyamide produced from a renewable resource. This grade is designed for high pressure fuel contact application. Percentage of renewable carbon according to ASTM D 6866: >59%.

Rilsan® KNO resin is a polyamide 11 resin produced from a renewable source. This natural grade is specially designed for injection molding. The percentage of renewable carbon measured according to ASTM D6866 is 98%.

Rilsan® MB 3000 NAT resin is a polyamide 11 produced from a renewable source. This natural grade is designed for injection molding and is classified as Halogen Free Flame Retardant (HFFR). The percentage of renewable carbon according to ASTM D 6866 (calculated) is >90%.

Rilsan® MB 3610 BLACK resin is a polyamide 11 produced from a renewable source. This black grade is plasticized and specially designed for pneumatic applications. It combines very high flexibility with good impact resistance. The percentage of renewable carbon according to ASTM D 6866 (calculated) is >59%.

Rilsan® MB 3610 NAT resin is a polyamide 11 produced from a renewable source. This natural grade is plasticized and specially designed for pneumatic applications. It combines very high flexibility with good impact resistance. The percentage of renewable carbon according to ASTM D 6866 (calculated) is >59%.

Rilsan® SESHVO resin - Rilsan® POLYAMIDE 610 (PA610) Rilsan® SESHVO resin is a dried polyamide 610 neat resin produced partially from a renewable source. This natural grade is a designed for compounding and extrusion. Percentage of renewable carbon according to ASTM D 6866: >60%.

Rilsan® SMNO F resin - Rilsan® POLYAMIDE 610 (PA610) Rilsan® SMNO F is an undried polyamide 610 resin produced partially from a renewable source. This natural grade is designed for compounding applications. Percentage of renewable carbon according to ASTM D 6866: >60%.

Rilsan® TESNO F resin - Rilsan® POLYAMIDE 1010 (PA1010) Rilsan® TESNO F resin is an undried polyamide 1010 neat resin produced from a renewable source. This natural grade is a designed for compounding. Percentage of renewable carbon according to ASTM D 6866: >99%.

Rilsan® TIEFLEX R463 BLACK TLCP resin is a flexible tie layer alloy partially based on renewable resources. This grade is designed for air brake application (tie layer for air brake tubing).

Rilsan® TIEFLEX R463 NAT TL resin is a flexible tie layer alloy partially based on renewable resources. This grade is designed for air brake application (tie layer for air brake tubing).

Rilsan® TIEFLEX R473 NAT TL resin is a flexible and partially bio based tie layer alloy. This grade is designed for air brake application (tie layer for air brake tubing).

Rilsan ® TIEFLEX S442 NAT TL resin is a flexible tie layer alloy partially based on renewable resources. This grade is designed for multilayer automotive and trucks fuel lines (tie layer for fuel line).

Rilsan® TIEFLEX S452 BLACK T6L resin is a flexible tie layer alloy partially based on renewable resources. This grade is designed for multilayer automotive and trucks fuel lines (tie layer for fuel line). In the case of direct contact with fuel, contact Arkema representative for recommendations.

Rilsan® TIEFLEX S452 NAT T6L resin is a flexible tie layer alloy partially based on renewable resources. This grade is designed for multilayer automotive and trucks lines (tie layer for fuel line). In the case of direct contact with fuel, contact Arkema representative for recommendations.

Rilsan® TMVO resin is a dried polyamide 1010 resin neat produced from a renewable source. This natural grade is a designed for compounding, filament extrusion and some injection molding applications. Percentage of renewable carbon according to ASTM D 6866: >99%.