DOW™ LDPE 692 HEALTH+™ is a Low Density Polyethylene barefoot resin designed for extrusion blow molding, injection blow molding, and blow-fill seal applications with good flexibility, moderate rigidity and good chemical resistance. It is also suitable for medical packaging films. Main Characteristics: - Good flexibility - Good chemical resistance - Good stiffness Complies with: - U.S. FDA 21CFR 177.1520 (c) 2.1 - USP XXIII Class VI - Drug Master File Listing Consult the regulations for complete details.

LDPE 7010E is a High Speed Extrusion Coating Resin Main Characteristics: - Designed for high speed extrusion coating - Robustness and consistency in melt drawing - Reliable Sealant Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)2.2 - Consult the regulations for complete details.

Dow™ LDPE 722 is used in flexible packaging and paperboard coating applications such as liquid/juice, laminate tube, condiment pouches, dry foods packaging, snack foods packaging, moist foods packaging, sugar pouches, lidding stock and medical packaging. DOW LDPE extrusion coating resins provide optimal neck-in and draw-down performance with minimal taste/odor contribution. DOW Polyethylene 722 is a broad molecular weight distribution homopolymer designed to offer good impact strength and crack resistance, with excellent flexibility. The resin has good processability over a wide range of molding conditions. - Typical applications include caps/closures - Good impact, ESCR with excellent flexibility Complies with: - CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520 (c) 2.2 - U.S. FDA DMF Consult the regulations for complete details.

DOW™ LDPE 740E R Low Density Polyethylene Resin has been designed with a specific focus on the compounding industry. DOW™ LDPE 740E R displays good processability, ease of blending, and a controlled, low gel level. The resin is therefore suitable for the production of high quality masterbatches. Main Characteristics: - Designed for compounding - Good blendability - Good processability - Consistently low gel level Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)2.2 - ISCC PLUS certification for bio-based plastics Consult the regulations for complete details.

DOW™ LDPE 740E REN Low Density Polyethylene Resin has been designed with a specific focus on the compounding industry. DOW™ LDPE 740E REN displays good processability, ease of blending, and a controlled, low gel level. The resin is therefore suitable for the production of high quality masterbatches. Main Characteristics: - Designed for compounding - Good blendability - Good processability - Consistently low gel level Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)2.2 - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

DOW™ LDPE 740E Low Density Polyethylene Resin has been designed with a specific focus on the compounding industry. DOW™ LDPE 740E displays good processability, ease of blending, and a controlled, low gel level. The resin is therefore suitable for the production of high quality masterbatches. Main Characteristics: - Designed for compounding - Good blendability - Good processability - Consistently low gel level Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)2.2 Consult the regulations for complete details.

- A low density polyethylene for stretching/cling film applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.1 - Complies with Canadian HPFB No Objection (With Limitations) - Consult the regulations for complete details

DOW LDPE 750E Polyethylene Resin is a low molecular weight, low density compounding grade designed for masterbatch production. The product gives an excellent combination of processability and blendability. Main Characteristics: - Low gel specification. - Excellent processability. - Low power consumption. - Excellent additive retention. - Good oxygen induction time. Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)2.1 Consult the regulations for complete details.

- A high additive film resin for general packaging applications - For cast film extrusion - A fast blooming resin for high speed bag conversion - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.2 - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Complies with Japan Hygienic Olefin and Styrene Plastics Association - Consult the regulations for complete details.

DOW LDPE 770G is Low Density Polyethylene Resin for Food and Industrial Packaging Main Characteristics: - Specially designed for high melt strength applications - Provides excellent bubble or web stability in monolayer, coex or blend configurations - Cast or blown film and extruded sheet Complies with: - U.S. FDA 21 CFR 177.1520 ( c )2.2 - EU, No 10/2011 Consult the regulations for complete details.

LDPE 780E Low Density Polyethylene Resin can be readily processed using conventional injection moulding techniques utilising melt temperatures between 140 and 250°C, a mould temperature between 10 and 50°C, and injection pressure between 50 and 150 MPa. When properly injection moulded, 780E Low Density Polyethylene Resin exhibit: - Excellent flow - Good rigidity - Good surface gloss Note: LDPE 780E Low Density Polyethylene Resin should comply with FDA regulation 177.1520 and with most European food contact regulations when used unmodified and processed according to good manufacturing practices for contact applications. Please, contact your nearest Dow office for food contact compliance statements.The purchaser remains responsible for determining whether the use complies with all relevant regulations. Applications: - Housewares. - Toys & leisures. - Containers. - Compounding. Complies with Canadian HPFB No Objection Complies with U.S. FDA 21 CFR 177.1520

DOW™ LDPE 91003 HEALTH+™ is a Low Density Polyethylene barefoot resin designed for blow-fill seal, extrusion blow molding, and injection blow molding applications with good flexibility and good chemical resistance. Main Characteristics: - Good flexibility - Good chemical resistance - Good stiffness Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - USP Class VI - Drug Master File Listing - USP <661.1> - European Pharmacopeia 3.1.3 and 3.1.4 Consult the regulations for complete details.

DOW™ LDPE 91020 HEALTH+™ is a Low Density Polyethylene barefoot resin designed for blow-fill-seal, extrusion blow molding, and injection blow molding applications with good flexibility and good chemical resistance. It is also suitable for medical packaging films. Main Characteristics: - Good flexibility - Good chemical resistance - Good stiffness Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - USP Class VI - Drug Master File Listing - USP <661.1> - European Pharmacopeia 3.1.3 and 3.1.4 Consult the regulations for complete details.

- Low Density Polyethylene (LDPE) - Typical applications include lids, caps/closures, general purpose - Excellent clarity - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.1. - Complies with U.S. FDA -DMF. - Complies with U.S. USP - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Consult the regulations for complete details. DOW Polyethylene 955I Low Density is a medium molecular weight distribution homopolymer designed to offer excellent clarity and flexibility and good toughness with low warpage. This resin has good processability over a wide range of molding conditions.

- Low Density Polyethylene (LDPE) - Typical applications include lids - Excellent clarity, flexibility, low warpage - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.1. - Complies with Canadian HPFB No Objection (With Limitations) - Consult the regulations for complete details. DOW Polyethylene 959S Low Density Resin is a medium molecular weight distribution homopolymer. This resin has good processability over a wide range of molding conditions.

- Low Density Polyethylene (LDPE) - Typical applications include toys, lids, and closures - Good gloss, rigidity, excellent flow - Complies with U.S. FDA 21 CFR 177.152 (c) 2.1 - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Consult the regulations for complete details DOW Polyethylene 993I Low Density Polyethylene Resin is a medium molecular weight distribution homopolymer designed to offer good gloss and rigidity with excellent flow characteristics. This resin has good processability over a wide range of molding conditions.

DOW LDPE™ PG 7004 Polyethylene Resin is typically used in extrusion coating applications. DOW LDPE PG 7004 Polyethylene Resin is designed for processing on conventional LDPE extrusion coating hardware at melt temperatures of 270 to 335°C, preferably less than 290°C, for best sensory performance. DOW LDPE PG 7004 Polyethylene Resin provides low volatile organic carbon (VOC) emissions in extrusion, contributing to low factory emissions and optimal sensory performance. When processed on suitable hardware, DOW LDPE PG 7004 polyethylene resin exhibits: - Excellent draw down. - Good edge stability. - Low neck-in. Complies with: - U.S. FDA-DMF - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 - Canadian HPFB No Objection Consult the regulations for complete details. Applications: - Paper board - Foil coatings for packaging food and non-food

DOW LDPE™ PG 7004 Polyethylene Resin from Dow has been designed to exhibit good processability, balanced physical properties, good rigidity and surface gloss, and excellent organoleptics when it is properly injection moulded. Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - U.S. FDA-DMF - EU, No 10/2011 - Canadian HPFB No Objection Consult the regulations for complete details. Applications: - Housewares. - Toys. - Containers. - Lids. - Caps.

DOW LDPE™ PG 7004 R Polyethylene Resin is typically used in extrusion coating applications. DOW LDPE PG 7004 R Polyethylene Resin is designed for processing on conventional LDPE extrusion coating hardware at melt temperatures of 270 to 335°C, preferably less than 290°C, for best sensory performance. DOW LDPE PG 7004 R Polyethylene Resin provides low volatile organic carbon (VOC) emissions in extrusion, contributing to low factory emissions and optimal sensory performance. When processed on suitable hardware, DOW LDPE PG 7004 R polyethylene resin exhibits: - Excellent draw down - Good edge stability - Low neck-in Applications: - Paper board - Foil coatings for packaging food and non-food Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 - ISCC PLUS certification for renewable-based plastics Consult the regulations for complete details.

DOW LDPE™ PG 7004 R Polyethylene Resin from Dow has been designed to exhibit good processability, balanced physical properties, good rigidity and surface gloss, and excellent organoleptics when it is properly injection moulded. Applications: - Housewares - Toys - Containers - Lids - Caps Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 - ISCC PLUS certification for renewable-based plastics Consult the regulations for complete details.

DOW LDPE™ PG 7004 REN Polyethylene Resin is typically used in extrusion coating applications. DOW LDPE PG 7004 REN Polyethylene Resin is designed for processing on conventional LDPE extrusion coating hardware at melt temperatures of 270 to 335°C, preferably less than 290°C, for best sensory performance. DOW LDPE PG 7004 REN Polyethylene Resin provides low volatile organic carbon (VOC) emissions in extrusion, contributing to low factory emissions and optimal sensory performance. When processed on suitable hardware, DOW LDPE PG 7004 REN polyethylene resin exhibits: - Excellent draw down - Good edge stability - Low neck-in Applications: - Paper board - Foil coatings for packaging food and non-food Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

DOW LDPE™ PG 7004 REN Polyethylene Resin from Dow has been designed to exhibit good processability, balanced physical properties, good rigidity and surface gloss, and excellent organoleptics when it is properly injection moulded. Applications: - Housewares - Toys - Containers - Lids - Caps Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

DOW LDPE™ PG 7008 Polyethylene Resin from Dow has been designed to exhibit good processability, balanced physical properties, good rigidity and surface gloss, and excellent organoleptics when it is properly injection moulded. Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 - Canadian HPFB No Objection Consult the regulations for complete details. Applications: - Housewares - Toys - Containers - Caps

Dow LDPE PG 7008 Polyethylene Resin is typicalled used in extrusion coating applications. Dow LDPE PG 7008 Polyethylene Resin can be readily processed using conventional LDPE extrusion coating hardware of melt temperatures of 270 to 335°C, preferably less than 290°C, for best sensory performance. Dow LDPE PG 7008 Polyethylene Resin provides low volatile organic carbon (VOC) emissions in extrusion, contributing to low factory emissions and optimal sensory performance. When processed on suitable hardware, Dow LDPE PG 7008 Polyethylene Resin exhibits excellent draw down good edge stability and low neck-in. Applications: - Paper, board and foil coatings for packaging, food and non-food Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 - Canadian HPFB No Objection Consult the regulations for complete details.

DOW™ LDPE PG 7008 R Polyethylene Resin is typically used in extrusion coating applications. Dow LDPE PG 7008 R Polyethylene Resin can be readily processed using conventional LDPE extrusion coating hardware of melt temperatures of 270 to 335°C, preferably less than 290°C, for best sensory performance. Dow LDPE PG 7008 R Polyethylene Resin provides low volatile organic carbon (VOC) emissions in extrusion, contributing to low factory emissions and optimal sensory performance. When processed on suitable hardware, Dow LDPE PG 7008 R Polyethylene Resin exhibits excellent draw down good edge stability and low neck-in. Applications: - Paper, board and foil coatings for packaging, food and non-food. Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 - ISCC PLUS certification for bio-based plastics Consult the regulations for complete details.

DOW™ LDPE PG 7008 REN Polyethylene Resin is typically used in extrusion coating applications. Dow LDPE PG 7008 REN Polyethylene Resin can be readily processed using conventional LDPE extrusion coating hardware of melt temperatures of 270 to 335°C, preferably less than 290°C, for best sensory performance. Dow LDPE PG 7008 REN Polyethylene Resin provides low volatile organic carbon (VOC) emissions in extrusion, contributing to low factory emissions and optimal sensory performance. When processed on suitable hardware, Dow LDPE PG 7008 REN Polyethylene Resin exhibits excellent draw down good edge stability and low neck-in. Applications: - Paper, board and foil coatings for packaging, food and non-food. Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - U.S. FDA-DMF - EU, No 10/2011 - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

DOW™ LDPE PT 7007 R Polyethylene Resin is a low density polyethylene designed for extrusion coating applications. DOW™ LDPE PT 7007 R Polyethylene Resin has been designed to offer minimum volatile organic carbon (VOC) levels for use in extrusion coating, contributing to low factory emissions and optimal sensory performance. DOW™ LDPE PT 7007 R Polyethylene Resin exhibits: - Excellent draw down. - Good edge stability. - Low neck-in. Applications: - Paper. - Board and foil coatings for packaging. - Food and non-food. DOW™ LDPE PT 7007 R Polyethylene Resin should comply with: - U.S. FDA CFR 177.1520(c)2.2 - EU, No 10/2011 when used unmodified and processed according to good manufacturing practices for food contact applications. Please contact your nearest office regarding food contact compliance statements. The purchaser remains responsible for determining whether the use complies with all relevant regulations. DOW™ LDPE PT 7007 R complies with ISCC PLUS certification for bio-based plastics

DOW™ LDPE PT 7007 REN Polyethylene Resin is a low density polyethylene designed for extrusion coating applications. DOW™ LDPE PT 7007 REN Polyethylene Resin has been designed to offer minimum volatile organic carbon (VOC) levels for use in extrusion coating, contributing to low factory emissions and optimal sensory performance. DOW™ LDPE PT 7007 REN Polyethylene Resin exhibits: - Excellent draw down. - Good edge stability. - Low neck-in. Applications: - Paper. - Board and foil coatings for packaging. - Food and non-food. Complies with: - U.S. FDA CFR 177.1520(c)2.2 - EU, No 10/2011 - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

DOW LDPE PT 7007 Polyethylene Resin is a low density polyethylene suitable designed for extrusion coating applications. DOW LDPE PT 7007 Polyethylene Resin has been designed to offer minimum volatile organic carbon (VOC) levels for use in extrusion coating, contributing to low factory emissions and optimal sensory performance. DOW LDPE PT 7007 Polyethylene Resin exhibits: - Excellent draw down. - Good edge stability. - Low neck-in. Note: DOW LDPE PT 7007 Polyethylene Resin should comply with U.S. FDA CFR 177.1520(c)2.2 and with EU, No 10/2011 when used unmodified and processed according to good manufacturing practices for food contact applications. Please contact your nearest office regarding food contact compliance statements. The purchaser remains responsible for determining whether the use complies with all relevant regulations. Applications: - Paper. - Board and foil coatings for packaging. - Food and non-food.

LDPE SC 7642 R Polyethylene Resin is designed for high speed cast extrusion lines, where it provides excellent draw down, low neck-in and high melt stability with a good balance between stiffness and tear resistance. Due to its density, the coefficient of friction of films made with LDPE SC 7642 R Polyethylene Resin will be lower. In association with DOWLEX* resins, it gives films with a superior balance between machine and cross direction properties. This resin can be readily extruded using conventional cast film techniques, using melt temperatures between 200 and 270 °C. Complies with: - EU No 10/2011 - U.S. FDA 21 CFR 177.1520(c )2.2 - ISCC PLUS certification for renewable-based plastics Consult the regulations for complete details.

LDPE SC 7642 REN Polyethylene Resin is designed for high speed cast extrusion lines, where it provides excellent draw down, low neck-in and high melt stability with a good balance between stiffness and tear resistance. Due to its density, the coefficient of friction of films made with LDPE SC 7642 REN Polyethylene Resin will be lower. In association with DOWLEX* resins, it gives films with a superior balance between machine and cross direction properties. This resin can be readily extruded using conventional cast film techniques, using melt temperatures between 200 and 270 °C. Complies with: - EU No 10/2011 - U.S. FDA 21 CFR 177.1520(c )2.2 - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

LDPE SC 7642 Polyethylene Resin is designed for high speed cast extrusion lines, where it provides excellent draw down, low neck-in and high melt stability with a good balance between stiffness and tear resistance. Due to its density, the coefficient of friction of films made with LDPE SC 7642 Polyethylene Resin will be lower. In association with DOWLEX* resins, it gives films with a superior balance between machine and cross direction properties. This resin can be readily extruded using conventional cast film techniques, using melt temperatures between 200 and 270 °C. Complies with: - EU No 10/2011 - U.S. FDA 21 CFR 177.1520(c )2.2 Consult the regulations for complete details.

DOW™ LDPE 6611 is a high viscosity low density polyethylene resin that contains various additives to assist in purging and cleaning the extruder. This polymer is formulated with agents to help it wet and scour metal surfaces within the extrusion system. It also contains a blowing agent which helps to disrupt normal flow patterns and enhance scouring action. The resin normally will foam, snap, and crackle as it leaves the die. Odors that are associated with ammonia and fish are detectable from the extrudate and feed hopper. When extruded, the resin has a grayish brown color and a very high viscosity at the die exit. Precautions *** Adequate ventilation is required for use. Fumes from extrusion can be irritatingto the eyes, nose, and throat. Fumes from high temperature extrusion of polyolefinresins contain various products of decomposition that may be toxic. *** Exploding bubbles can spit hot polymer as the melt exits the die. Properprotective apparel, including eye protection, should be worn. Other Restrictions - DOW™ LDPE 6611 should not be extruded or exposed to temperatures above 310°C(590°F). - DOW™ LDPE 6611 does not comply with FDA regulations, so complete purgingfrom the extrusion system is required after use. - DOW™ LDPE 6611 contains silicon dioxide to assist in scouring hard deposits frommetal surfaces. Excessive use of this purge compound can cause prematureequipment wear, particularly in some extrusion systems that are soft nickel plated. Applications - DOW™ LDPE 6611 is not required for normal transitions into and out of SURLYN™ ionomer resins, NUCREL™ acid copolymer resins, and other common polyolefins. The "Disco Purge / Transition Procedure" is recommended for use during these normal transitions, and special purging compounds such as DOW™ LDPE 6611 are not part of this procedure. There are instances, however, when it is practical to use a special purging compound like DOW™ LDPE 6611. For a copy of the "Disco Purge / Transition Procedure", please contact your Dow Packaging & Industrial Polymer representative. Examples for use include: - Cleaning particularly dirty extruders. - Removing die lines caused by oxidized polymer deposits. - Purging extruders that have chronic purging problems (gels) following runs ofSURLYN™ resins, NUCREL™ resins, ELVAX™ ethylene vinyl acetate resins, orother specialty resins. Consulting your technical representative is also highlyrecommended for these cases. - Purging prior to extrusion jobs that are particularly sensitive to gels. - Facilitating purging for shutdowns when normal Disco Purging has not proveneffective. A shutdown is any period of time when the extruder will be completelyturned off, such as a weekend or maintenance outage. It is very important thatspecialty copolymers such as SURLYN™ and NUCREL™ be completely purgedbefore such a shutdown, as the cool-down, heat-up, and soak periods allow plentyof time to cause significant gel problems. - Facilitating rapid removal of pigments from the extruder. - DOW™ LDPE 6611 has also been used to facilitate pulling and cleaning largediameter extrusion screws. However, acrylic purge material is normally used forthis purpose. - The high viscosity of DOW™ LDPE 6611 lends itself to easy cleaning of hardwareduring disassembly, because it peels rather than smearing along the metalsurfaces. - Although most frequently used on flat die extrusion equipment, DOW™ LDPE 6611can also be used for round die converting equipment as well. It can be difficult topurge DOW™ LDPE 6611 out of standard spiral-fed blown film dies, unless a verylow melt index polyethylene is available for this purpose (0.5 MI LDPE or 1.0 MILLDPE).

DOW™ 20 HEALTH+™ Ultra-Pure Polyethylene resin is characterized by low melt index and intermediate crystallinity. A unique polymerization process allows for the production of a very high purity product, vital for pharmaceutical applications. The product also has outstanding flexibility and environmental stress crack resistance without the use of additives. Applications - Extrusion Blow / Fill / Seal vials, also known as "BFS vials". - Injection molded parts, in particular used in medical and pharmaceutical packaging.

DOW™ 2010 Ultra-Pure Polyethylene resin is characterized by low melt index and intermediate crystallinity. This product, produced via a unique polymerization process, has outstanding flexibility and environmental stress crack resistance. Features: - Contains oleamide as a mold release agent. Applications - Injection molded parts used in medical, pharmaceutical, and personal care packaging.

DOW™ 2020T Ultra-Pure Polyethylene resin is characterized by low melt index and intermediate crystallinity. This product, produced via a unique polymerization process, has outstanding flexibility and environmental stress crack resistance. DOW™ 2020T Ultra-Pure Polyethylene is mainly intended for use in extruded tubing. Applications - Extruded tubes, in particular used in medical, pharmaceutical, and personal care packaging.

DOW™ 20-6064 HEALTH+™ Ultra-Pure Polyethylene resin is characterized by low melt index and intermediate crystallinity. A unique polymerization process allows for the production of a very high purity product, vital for pharmaceutical applications. The product is designed to have outstanding flexibility and environmental stress crack resistance. For optimized processability, the Dow™ 20- 6064 HEALTH+™ contains a specially-designed release agent compatible with many pharmaceutical formulations. Features - Contains polyethylene glycol (PEG) as an injection blow molding release agent, at a standard level. Applications - Injection blow molded bottles, in particular used in medical and pharmaceutical packaging.

DOW™ 20-6064A HEALTH+™ Ultra-Pure Polyethylene resin is characterized by low melt index and intermediate crystallinity. A unique polymerization process allows for the production of a very high purity product, vital for pharmaceutical applications. The product is designed to have outstanding flexibility and environmental stress crack resistance. For optimized processability, the Dow™ 20-6064A HEALTH+™ contains a specially-designed release agent compatible with many pharmaceutical formulations. Features - Contains polyethylene glycol (PEG) as an injection blow molding release agent, at a lower level. Applications - Injection blow molded bottles, in particular used in medical and pharmaceutical packaging.

DOW™ 20-6064B HEALTH+™ Ultra-Pure Polyethylene resin is characterized by low melt index and intermediate crystallinity. A unique polymerization process allows for the production of a very high purity product, vital for pharmaceutical applications. The product is designed to have outstanding flexibility and environmental stress crack resistance. For optimized processability, the Dow™ 20-6064B HEALTH+™ contains a specially-designed release agent compatible with many pharmaceutical formulations. Features - Contains polyethylene glycol (PEG) as an injection blow molding release agent, at a higher level. Applications - Injection blow molded bottles, in particular used in medical and pharmaceutical packaging.

DOW™ 20-6064C HEALTH+™ Ultra-Pure Polyethylene resin is characterized by low melt index and intermediate crystallinity. A unique polymerization process allows for the production of a very high purity product, vital for pharmaceutical applications. The product is designed to have outstanding flexibility and environmental stress crack resistance. For optimized processability, the Dow™ 20-6064C HEALTH+™ contains a specially-designed release agent compatible with many pharmaceutical formulations. Features - Contains polyethylene glycol (PEG) as an injection blow molding release agent, at a very high level. Applications - Injection blow molded bottles, in particular used in medical and pharmaceutical packaging.